4.8 Review

Fast Charging Anode Materials for Lithium-Ion Batteries: Current Status and Perspectives

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Enabling 4C Fast Charging of Lithium-Ion Batteries by Coating Graphite with a Solid-State Electrolyte

Eric Kazyak et al.

Summary: Coating graphite electrodes with a single-ion conducting solid electrolyte using atomic layer deposition can improve the fast-charging performance and cycle life of lithium-ion batteries without sacrificing energy density.

ADVANCED ENERGY MATERIALS (2022)

Article Chemistry, Physical

Highly efficient Co3O4/CeO2 heterostructure as anode for lithium-ion batteries

Ying Kang et al.

Summary: A Co3O4/CeO2 heterostructure derived from metal-organic frameworks was designed and synthesized through one-step microwave synthesis to address the issues of large volume change and low electric conductivity of Co3O4 in lithium-ion batteries. This novel strategy utilizing rare earth components showed high reversible capacity and excellent cycling stability when used as an anode material for LIBs.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Multidisciplinary

A Covalent P-C Bond Stabilizes Red Phosphorus in an Engineered Carbon Host for High-Performance Lithium-Ion Battery Anodes

Shaojie Zhang et al.

Summary: The study explores the use of a vaporization-condensation strategy to address poor conductivity and volume expansion issues in red phosphorus (RP) anodes. By loading RP onto a carbon framework using this method, a high capacity and safety are achieved. Experimental results demonstrate that the RP-PC anode maintains a high specific capacity even under high-rate conditions.

ACS NANO (2021)

Article Chemistry, Physical

Titanium Niobium Oxide: From Discovery to Application in Fast-Charging Lithium-Ion Batteries

Kent J. Griffith et al.

Summary: Lithium-ion batteries play a crucial role in portable technology and transportation, with new materials like TiNb2O7 having the potential to reshape the industry. However, translating new materials from laboratory prototypes to commercial products presents challenges.

CHEMISTRY OF MATERIALS (2021)

Article Multidisciplinary Sciences

A cooperative biphasic MoOx-MoPx promoter enables a fast-charging lithium-ion battery

Sang-Min Lee et al.

Summary: Fast-charging of lithium-ion batteries is hindered by the uncontrollable plating of metallic Li on the graphite anode, but surface engineering with a cooperative biphasic MoOx-MoPx promoter can improve charging rate and suppress Li plating, achieving fast chargeability and stable cycling performance.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

Enabling 6C Fast Charging of Li-Ion Batteries with Graphite/Hard Carbon Hybrid Anodes

Kuan-Hung Chen et al.

Summary: This study demonstrates that by fabricating hybrid anodes with uniform mixtures of graphite and hard carbon, it is possible to achieve high-energy density and efficient fast charging in Li-ion batteries. The optimized hybrid anodes retain significantly higher specific energy after 500 cycles of fast charging compared to graphite anodes under the same conditions, making them a promising solution for electric vehicles.

ADVANCED ENERGY MATERIALS (2021)

Review Chemistry, Physical

Hard Carbon Anodes: Fundamental Understanding and Commercial Perspectives for Na-Ion Batteries beyond Li-Ion and K-Ion Counterparts

Ling-Fei Zhao et al.

Summary: Hard carbon is recognized as a promising anode material for alkali metal-ion batteries, particularly showing outstanding performance in sodium-ion batteries, with in-depth research and commercial prototype demonstration. Challenges and research perspectives for future development and early commercialization of HC-based sodium-ion batteries are also discussed comprehensively.

ADVANCED ENERGY MATERIALS (2021)

Article Environmental Sciences

Plausible energy demand patterns in a growing global economy with climate policy

Gregor. Semieniuk et al.

Summary: The study highlights the unresolved challenge of combining energy demand reductions with robust income growth, especially for developing countries reliant on industrialization. It suggests exploring faster energy supply decarbonization and the importance of addressing limits to energy demand reduction in integrated assessment modeling. Insights from development economics and other disciplines could help in generating plausible assumptions to tackle climate policy challenges.

NATURE CLIMATE CHANGE (2021)

Article Chemistry, Multidisciplinary

Mn-Substituted Tunnel-Type Polyantimonic Acid Confined in a Multidimensional Integrated Architecture Enabling Superfast-Charging Lithium-Ion Battery Anodes

Boya Wang et al.

Summary: By engineering a novel multidimensional integrated architecture consisting of Mn-substituted PAA nanocrystals embedded in tubular graphene scrolls and co-assembled with N-doped graphene sheets, the challenges in electronic conductivity and structural stability of PAA-based electrodes are addressed. This 3D electrode framework provides omnidirectional electron/ion transport network, enabling ultrahigh rate capacity, superfast-charging capability, and durable cycling performance.

ADVANCED SCIENCE (2021)

Article Chemistry, Physical

Low crystalline 1T-MoS2@S-doped carbon hollow spheres as an anode material for Lithium-ion battery

Weixin Wu et al.

Summary: The MoS2@SC composite synthesized via hydrothermal process exhibits high rate performance and excellent cycling stability as an anode material for LIBs, with capacities of 847 and 622 mA h g(-1) achieved at current densities of 0.2 A g(-1) and 2 A g(-1) respectively. The material also delivers a high reversible capacity of 659 mA h g(-1) at a larger current density of 2 A g(-1) with minimal capacity loss after 500 cycles.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Physical

Strategies to Boost Ionic Conductivity and Interface Compatibility of Inorganic- Organic Solid Composite Electrolytes

Xiaoqi Zhu et al.

Summary: All-solid-state electrolytes, particularly inorganic-organic solid composite electrolytes, have great potential in high energy batteries due to their safety assurance. However, poor ionic conductivity and unstable electrode-electrolyte interface pose challenges in their development. Strategies to improve ionic conductivity and interface compatibility include tuning filler properties, surface decoration, and utilizing additives, as well as designing multilayered electrolytes and blending polymers with different molecular weights and functional groups. This review aims to provide insights and guidance for the design of all-solid-state lithium metal batteries.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

Carbon Anode Materials: A Detailed Comparison between Na-ion and K-ion Batteries

Lupeng Zhang et al.

Summary: This article discusses the development status and comparative analysis of carbon anode materials for SIBs and PIBs, emphasizing the importance of understanding the storage/release mechanisms of Na+/K+ in carbon materials for achieving ideal performance.

ADVANCED ENERGY MATERIALS (2021)

Review Chemistry, Physical

Intercalation pseudocapacitive electrochemistry of Nb-based oxides for fast charging of lithium-ion batteries

Xue Han et al.

Summary: Niobium-based oxides, such as Nb2O5 and TiNbxO(2+2.5)x compounds, have shown great potential in electrochemical energy storage due to their unique intercalation pseudocapacitance mechanism. However, their poor electronic conductivity limits practical applications.

NANO ENERGY (2021)

Article Chemistry, Physical

Understanding the limitations of lithium ion batteries at high rates

Michael. J. Lain et al.

Summary: Commercial lithium ion cells were disassembled for electrode evaluation, showing three limiting processes during high rate pulse power tests, and specific charge and discharge parameters were identified for different power levels.

JOURNAL OF POWER SOURCES (2021)

Review Chemistry, Multidisciplinary

Aligned Carbon-Based Electrodes for Fast-Charging Batteries: A Review

Qikai Huang et al.

Summary: This review evaluates the mechanism, advantages, and challenges of aligned carbon-based electrodes (ACBEs) for fast-charging batteries, summarizes the design and preparation methods of ACBEs based on their different dimensions, and illustrates their applications in different batteries.

SMALL (2021)

Article Chemistry, Multidisciplinary

Engineering All-Purpose Amorphous Carbon Nanotubes with High N/O-Co-Doping Content to Bridge the Alkali-Ion Batteries and Li Metal Batteries

Xiao-Hua Zhang et al.

Summary: The hierarchical porous carbon nanotubes network (NOPCT) with high N/O-co-doping content shows excellent performance and cycle stability in Li/Na-ion batteries and hybrid Li metal anodes. It also plays a key role in the sustainability of sulfur electrodes, demonstrating great potential for practical application in advanced ESSs. The study provides valuable insights into the design and development of all-purpose electrode materials for energy storage systems.

SMALL (2021)

Article Chemistry, Physical

Supramolecular Self-Assembled Multi-Electron-Acceptor Organic Molecule as High-Performance Cathode Material for Li-Ion Batteries

Meng-Siou Wu et al.

Summary: Organic electrode materials offer advantages such as low toxicity and sustainability, but improvements in redox potential, capacity, cycling stability, and electronic conductivity are needed to compete with inorganic-based compounds. The molecular design of HATAQ with extended pi-conjugation shows promising results for achieving exceptionally high energy density, rate capability, and cycling stability in organic electrodes.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Tetrabutylammonium-Intercalated 1T-MoS2 Nanosheets with Expanded Interlayer Spacing Vertically Coupled on 2D Delaminated MXene for High-Performance Lithium-Ion Capacitors

Lei Wang et al.

Summary: A stable thermodynamic heterostructure of 1T-MoS2/d-Ti3C2Tx is prepared, leveraging the advantages of TBA(+) intercalation and extra-large interlayer spacing to achieve outstanding rate performance. The resulting lithium-ion capacitor demonstrates remarkable electrochemical performance with high energy density and power density, as well as excellent capacity retention after cycling.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

New Insights into the High-Performance Black Phosphorus Anode for Lithium-Ion Batteries

Minsi Li et al.

Summary: The study presents a high-performance nanostructured BP/G/CNTs composite synthesized using ball-milling method, which shows a high initial capacity of 1375 mA h g(-1) at 0.15 A g(-1) and maintains 1031.7 mA h g(-1) after 450 cycles. Moreover, the electrochemical mechanism of BP anodes with three-step lithiation and delithiation is experimentally revealed for the first time, along with evidence of an open-circuit relaxation effect of the electrode.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

A Coral-Like FeP@NC Anode with Increasing Cycle Capacity for Sodium-Ion and Lithium-Ion Batteries Induced by Particle Refinement

Canpei Wang et al.

Summary: The study introduces a coral-like FeP@NC composite, which demonstrates ultra-stable cycling performance in sodium-ion batteries with a capacity retention of 82%. Through particle refinement and recombination, the FeP nanoparticles provide more active sites for Na+ storage, leading to an increase in capacity during cycling.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Multidisciplinary Sciences

Inorganic-organic competitive coating strategy derived uniform hollow gradient-structured ferroferric oxide-carbon nanospheres for ultra-fast and long-term lithium-ion battery

Yuan Xia et al.

Summary: The study demonstrates the successful construction of gradient-structured ferroferric oxide-carbon nanospheres using an inorganic-organic competitive coating strategy, leading to stable cycling performance and reversible specific capacities. This unique structure achieves high capacity and cycling stability while limiting volume change.

NATURE COMMUNICATIONS (2021)

Review Chemistry, Physical

Hard Carbon Anodes for Next-Generation Li-Ion Batteries: Review and Perspective

Lijing Xie et al.

Summary: Hard carbons, with their enriched microcrystalline structure, have attracted attention as a promising anode material for high-energy LIBs, but face challenges such as low initial efficiency and capacity issues. Current research efforts are focused on addressing these challenges to enable practical application in next-generation batteries.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

High-Capacity and Kinetically Accelerated Lithium Storage in MoO3 Enabled by Oxygen Vacancies and Heterostructure

Yingying Zhang et al.

Summary: The MoO3-x/MXene heterostructure, fabricated by introducing oxygen vacancies and MXene nanosheets, exhibits excellent lithium-ion storage performances due to accelerated ion diffusion kinetics, enhanced electrical conductivity, and additional active sites induced by oxygen vacancies as well as robust interfacial contact. This composite shows a high reversible capacity of 1258 mAh g(-1) at 0.1 A g(-1) for Li-ion storage and retains 474 mAh g(-1) at 10 A g(-1), remarkably higher than previously reported MoO3-based anode materials. The composite also achieves an unparalleled energy density of 330 Wh kg(-1) when assembled with commercial LiFePO4 into a full LIB.

ADVANCED ENERGY MATERIALS (2021)

Review Chemistry, Physical

Fast Charging of Lithium-Ion Batteries: A Review of Materials Aspects

Manuel Weiss et al.

Summary: Fast charging is essential for the economic success of electric vehicles, with lithium-ion batteries facing limitations due to the transport of lithium ions within the electrodes. Understanding these limitations is crucial for optimizing material properties for fast-charging applications.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Investigation of Lithium Ion Diffusion of Graphite Anode by the Galvanostatic Intermittent Titration Technique

Jong Hyun Park et al.

Summary: Graphite is commonly used as an anode material in commercial lithium-ion batteries due to its reversible lithium-ion storage capability and low electrode potential. However, the sluggish diffusion kinetics of graphite anodes limit the rate capability of lithium-ion batteries. The diffusion coefficient of lithium ions in commercial graphite anodes can be determined using a galvanostatic intermittent titration technique, revealing mixed phases during lithium intercalation/deintercalation.

MATERIALS (2021)

Article Chemistry, Physical

Sn-based nanomaterials: From composition and structural design to their electrochemical performances for Li- and Na-ion batteries

Chenghao Wu et al.

Summary: Tin-based anode materials for lithium-ion batteries and sodium ion batteries have attracted increasing interest due to their high theoretical capacities, natural abundance, and suitable operating voltages. However, challenges such as severe volume variation and poor reaction kinetics during charging/discharging processes have been hindering their practical application. Various innovative strategies have been developed to address these issues, highlighting the importance of composition and structural design in advancing tin-based anodes for future energy storage applications.

ENERGY STORAGE MATERIALS (2021)

Review Materials Science, Multidisciplinary

A Li3VO4 micro/nanoscale anode with fast ion transportation for advanced lithium-ion batteries: a mini-review

Miaomiao Wang et al.

Summary: Li3VO4 is considered a promising anode material for lithium-ion batteries due to its special crystal structure and high theoretical capacity, but its poor electronic conductivity hinders its commercial applications. Future challenges and prospects include controllable fabrication of Li3VO4, enhancing Li+ ion diffusion efficiency, real-time measurement of storage mechanisms, and green treatments for waste liquid.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Chemistry, Multidisciplinary

3D periodic polyimide nano-networks for ultrahigh-rate and sustainable energy storage

Youngjin Ham et al.

Summary: Organic molecules with redox-active motifs are gaining attention as next-generation electrodes for sustainable energy storage, with a focus on engineering three-dimensional structures to meet practical requirements. A fabrication strategy has been demonstrated to create high-performance organic electrodes, achieving high reversible capacity and retention rates at fast charging rates. This opens up new opportunities for high-performance organic batteries with unprecedented lithium-ion storage rates.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Inorganic & Nuclear

Copper niobate nanowires boosted by a N, S co-doped carbon coating for superior lithium storage

Xinhao Cai et al.

Summary: Cu2Nb34O87/NSC nanowires prepared by electrospinning combined with surface coating exhibit excellent capacity and cycling stability, showing potential to be a candidate material for the anode in lithium-ion batteries.

DALTON TRANSACTIONS (2021)

Article Materials Science, Multidisciplinary

A hierarchical Ti2Nb10O29 composite electrode for high-power lithium-ion batteries and capacitors

Tao Yuan et al.

Summary: The study successfully designed a TNO@NC composite structure using a novel process, improving the electronic and ionic conductivity of the TNO material and enhancing its rate capability. The optimized sample exhibited excellent performance in half-cells, with high reversible capacity and stable cycling performance.

MATERIALS TODAY (2021)

Review Chemistry, Multidisciplinary

Hard carbon for sodium storage: mechanism and optimization strategies toward commercialization

Dequan Chen et al.

Summary: Sodium-ion batteries have potential in grid-scale energy storage, with hard carbon as a promising anode material for commercialization, requiring in-depth understanding of storage mechanism and performance optimization. Future research and commercialization efforts can focus on increasing specific capacity, optimizing rate performance, and enhancing initial coulombic efficiency.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Review Electrochemistry

Recent Progress in Polyanionic Anode Materials for Li (Na)-Ion Batteries

Yao Liu et al.

Summary: While carbon, oxide, and silicon-based materials have limitations in current LIB applications, polyanionic compounds have gained attention for their ability to stabilize structures, adjust redox couples, and provide migration channels for guest ions, leading to electrode materials with long-term cycling, high energy density, and outstanding rate capability.

ELECTROCHEMICAL ENERGY REVIEWS (2021)

Review Chemistry, Multidisciplinary

Carbon materials for ion-intercalation involved rechargeable battery technologies

Gang Wang et al.

Summary: The ever-increasing energy demand has driven the research on inexpensive, safe, scalable, and high-performance rechargeable batteries, with carbon materials being extensively studied as electrode materials. Carbon materials can serve as ideal anodes for 'Rocking-Chair' alkali metal-ion batteries and also show potential for dual-ion battery and Al-ion battery technologies. Significant advances have been made in understanding the porous structure, chemical composition, and interlayer spacing control of carbon materials as cation and anion hosts, with a focus on developing novel carbon nanostructures and carbon-derived energy storage devices.

CHEMICAL SOCIETY REVIEWS (2021)

Article Chemistry, Physical

Synchronously improved graphitization and surface area in a 3D porous carbon network as a high capacity anode material for lithium/sodium-ion batteries

Haimi Liu et al.

Summary: The study successfully enhanced the graphitization and surface area of carbon materials by using bifunctional silica as a catalyst and template, combined with N, P co-doping strategy, to achieve ideal performance for Li and Na storage.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Multidisciplinary

Uniformly Confined Germanium Quantum Dots in 3D Ordered Porous Carbon Framework for High-Performance Li-ion Battery

Yan Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

A Black Phosphorus-Graphite Composite Anode for Li-/Na-/K-Ion Batteries

Hongchang Jin et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Engineering, Environmental

MXene-decorated SnS2/Sn3S4 hybrid as anode material for high-rate lithium-ion batteries

Junfeng Li et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Chemistry, Physical

Hollow carbon sphere based WS2 anode for high performance lithium and sodium ion batteries

Wenlong Liu et al.

CHEMICAL PHYSICS LETTERS (2020)

Review Chemistry, Multidisciplinary

How does Molybdenum Disulfide Store Charge: A Minireview

Rui Zhang et al.

CHEMSUSCHEM (2020)

Article Chemistry, Physical

Yolk-shelled Sn@C@MnO hierarchical hybrid nanospheres for high performance lithium-ion batteries

Fanchao Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Chemistry, Physical

Oxygen vacancies enhance the lithium ion intercalation pseudocapacitive properties of orthorhombic niobium pentoxide

Songmin Zhang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Article Chemistry, Multidisciplinary

Ultrastable Silicon Anode by Three-Dimensional Nanoarchitecture Design

Gang Huang et al.

ACS NANO (2020)

Article Chemistry, Multidisciplinary

Intrinsic Capacitance of Molybdenum Disulfide

Jialu Chen et al.

ACS NANO (2020)

Article Chemistry, Multidisciplinary

Synergy of Ion Doping and Spiral Array Architecture on Ti2Nb10O29: A New Way to Achieve High-Power Electrodes

Shengjue Deng et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Covalent Assembly of MoS2Nanosheets with SnS Nanodots as Linkages for Lithium/Sodium-Ion Batteries

Jiajia Ru et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Physical

Defect-rich and N-doped hard carbon as a sustainable anode for high-energy lithium-ion capacitors

Jiangmin Jiang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Article Chemistry, Multidisciplinary

Insights into Lithium and Sodium Storage in Porous Carbon

Gaojing Yang et al.

NANO LETTERS (2020)

Article Nanoscience & Nanotechnology

Enhancing Lithium Storage Performances of the Li4Ti5O12 Anode by Introducing the CuV2O6 Phase

Rui Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Chemistry, Multidisciplinary

Designing High Performance Organic Batteries

Yuan Chen et al.

ACCOUNTS OF CHEMICAL RESEARCH (2020)

Article Chemistry, Multidisciplinary

Scalable Production of Wearable Solid-State Li-Ion Capacitors from N-Doped Hierarchical Carbon

Yanan Xu et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Multidisciplinary

Stabilization of Sn Anode through Structural Reconstruction of a Cu-Sn Intermetallic Coating Layer

Guanzhi Wang et al.

ADVANCED MATERIALS (2020)

Review Nanoscience & Nanotechnology

Two-Dimensional Black Phosphorus: An Emerging Anode Material for Lithium-Ion Batteries

JiPing Zhu et al.

NANO-MICRO LETTERS (2020)

Article Multidisciplinary Sciences

A disordered rock salt anode for fast-charging lithium-ion batteries

Haodong Liu et al.

NATURE (2020)

Article Multidisciplinary Sciences

Regulating the reactivity of black phosphorus via protective chemistry

Xiao Liu et al.

SCIENCE ADVANCES (2020)

Review Electrochemistry

Challenges and Development of Tin-Based Anode with High Volumetric Capacity for Li-Ion Batteries

Fengxia Xin et al.

ELECTROCHEMICAL ENERGY REVIEWS (2020)

Article Chemistry, Physical

Off-stoichiometric TiO2-x-decorated graphite anode for high-power lithium-ion batteries

Dong Young Rhee et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Review Chemistry, Multidisciplinary

Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries

Feixiang Wu et al.

CHEMICAL SOCIETY REVIEWS (2020)

Review Electrochemistry

Building Safe Lithium-Ion Batteries for Electric Vehicles: A Review

Jian Duan et al.

ELECTROCHEMICAL ENERGY REVIEWS (2020)

Article Chemistry, Physical

Rapid Lithium Diffusion in Order@Disorder Pathways for Fast-Charging Graphite Anodes

Wenlong Cai et al.

SMALL STRUCTURES (2020)

Article Materials Science, Ceramics

Characterization of vacuum-annealed TiNb2O7 as high potential anode material for lithium-ion battery

Ryoji Inada et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2019)

Article Chemistry, Physical

Zr-doped Li4Ti5O12 anode materials with high specific capacity for lithium-ion batteries

Lina Hou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Review Chemistry, Multidisciplinary

Fast Charging Lithium Batteries: Recent Progress and Future Prospects

Gao-Long Zhu et al.

SMALL (2019)

Article Nanoscience & Nanotechnology

Anatase TiO2 as a Na+-Storage Anode Active Material for Dual-Ion Batteries

Xiaohong Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Review Energy & Fuels

Challenges and opportunities towards fast-charging battery materials

Yayuan Liu et al.

NATURE ENERGY (2019)

Article Chemistry, Physical

Metallic 1T phase MoS2/MnO composites with improved cyclability for lithium-ion battery anodes

Zhao Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Review Multidisciplinary Sciences

Energy storage: The future enabled by nanomaterials

Ekaterina Pomerantseva et al.

SCIENCE (2019)

Article Chemistry, Analytical

High-rate and long-term cycle stability of lithium-ion batteries enabled by boron-doping TiO2 nanofiber anodes

Ling Li et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2019)

Review Chemistry, Physical

Recent efforts in design of TiO2(B) anodes for high-rate lithium-ion batteries: A review

Denis P. Opra et al.

JOURNAL OF POWER SOURCES (2019)

Article Multidisciplinary Sciences

Li-ion battery material under high pressure: amorphization and enhanced conductivity of Li4Ti5O12

Yanwei Huang et al.

NATIONAL SCIENCE REVIEW (2019)

Article Nanoscience & Nanotechnology

New Anode Material for Lithium-Ion Batteries: Aluminum Niobate (AlNb11O29)

Xiaoming Lou et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Physical

TiO2-B nanowires via topological conversion with enhanced lithium-ion intercalation properties

Weifeng Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Chemistry, Multidisciplinary

PEDOT-PSS coated VS2 nanosheet anodes for high rate and ultrastable lithium-ion batteries

Zhaoguang Ding et al.

NEW JOURNAL OF CHEMISTRY (2019)

Article Chemistry, Physical

Synergistic storage of lithium ions in defective anatase/rutile TiO2 for high-rate batteries

Weixin Song et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Physical

Reviving bulky MoS2 as an advanced anode for lithium-ion batteries

Shicai Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Chemistry, Physical

Electrochemically Exfoliated Phosphorene-Graphene Hybrid for Sodium-Ion Batteries

Honglei Shuai et al.

SMALL METHODS (2019)

Review Chemistry, Physical

Two-dimensional transition metal dichalcogenides in supercapacitors and secondary batteries

Liangxu Lin et al.

ENERGY STORAGE MATERIALS (2019)

Review Energy & Fuels

Lithium-ion battery fast charging: A review

Anna Tomaszewska et al.

ETRANSPORTATION (2019)

Article Nanoscience & Nanotechnology

Mg2Nb34O87 Porous Microspheres for Use in High-Energy, Safe, Fast-Charging, and Stable Lithium-Ion Batteries

Xiangzhen Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

N-Doping and Defective Nanographitic Domain Coupled Hard Carbon Nanoshells for High Performance Lithium/Sodium Storage

Shifei Huang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Review Chemistry, Multidisciplinary

30 Years of Lithium-Ion Batteries

Matthew Li et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

Formation of NiCo2V2O8 Yolk-Double Shell Spheres with Enhanced Lithium Storage Properties

Yan Lu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Chemistry, Multidisciplinary

A Peapod-like CoP@C Nanostructure from Phosphorization in a Low-Temperature Molten Salt for High-Performance Lithium-Ion Batteries

Zhiliang Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Engineering, Environmental

TiO2 coated Si/C interconnected microsphere with stable framework and interface for high-rate lithium storage

Zheng Yi et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Review Chemistry, Multidisciplinary

Review of Hybrid Ion Capacitors: From Aqueous to Lithium to Sodium

Jia Ding et al.

CHEMICAL REVIEWS (2018)

Article Chemistry, Physical

Rational design of Fe3O4@C yolk-shell nanorods constituting a stable anode for high-performance Li/Na-ion batteries

Beibei Wang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)

Review Chemistry, Physical

Li plating as unwanted side reaction in commercial Li-ion cells - A review

Thomas Waldmann et al.

JOURNAL OF POWER SOURCES (2018)

Article Chemistry, Physical

N-doped hollow urchin-like anatase TiO2@C composite as a novel anode for Li-ion batteries

Yalan Xing et al.

JOURNAL OF POWER SOURCES (2018)

Article Chemistry, Multidisciplinary

Degradation Chemistry and Stabilization of Exfoliated Few-Layer Black Phosphorus in Water

Taiming Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Chemistry, Physical

Synthesis of open helmet-like carbon skeletons for application in lithium-ion batteries

Chun Cheng Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Review Chemistry, Physical

Ti2Nb2xO4+5x anode materials for lithium-ion batteries: a comprehensive review

Lei Hu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Review Chemistry, Multidisciplinary

Toward sustainable and systematic recycling of spent rechargeable batteries

Xiaoxiao Zhang et al.

CHEMICAL SOCIETY REVIEWS (2018)

Article Electrochemistry

Exploring Classes of Co-Solvents for Fast-Charging Lithium-Ion Cells

David S. Hall et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Article Nanoscience & Nanotechnology

Nitrogen and Phosphorus Codoped Porous Carbon Framework as Anode Material for High Rate Lithium-Ion Batteries

Chunrong Ma et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Electrochemistry

Identifying the limiting electrode in lithium ion batteries for extreme fast charging

Chengyu Mao et al.

ELECTROCHEMISTRY COMMUNICATIONS (2018)

Review Materials Science, Multidisciplinary

Sn-based Intermetallic Compounds for Li-ion Batteries: Structures, Lithiation Mechanism, and Electrochemical Performances

Zheng Yi et al.

ENERGY & ENVIRONMENTAL MATERIALS (2018)

Review Electrochemistry

High-Performance Anode Materials for Rechargeable Lithium-Ion Batteries

Jun Lu et al.

ELECTROCHEMICAL ENERGY REVIEWS (2018)

Review Chemistry, Physical

Synthesis, stabilization and applications of 2-dimensional 1T metallic MoS2

Shangli Shi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Chemistry, Analytical

Structure and enhanced electrochemical performance of the CaF2-modified Li4Ti5O12 anode material

Wen Li et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2017)

Article Chemistry, Physical

Enabling fast charging - Vehicle considerations

Andrew Meintz et al.

JOURNAL OF POWER SOURCES (2017)

Article Multidisciplinary Sciences

Hierarchically structured lithium titanate for ultrafast charging in long-life high capacity batteries

Mateusz Odziomek et al.

NATURE COMMUNICATIONS (2017)

Review Chemistry, Physical

Challenges of Spinel Li4Ti5O12 for Lithium-Ion Battery Industrial Applications

Tao Yuan et al.

ADVANCED ENERGY MATERIALS (2017)

Review Chemistry, Physical

Opening Two-Dimensional Materials for Energy Conversion and Storage: A Concept

Yinghui Xue et al.

ADVANCED ENERGY MATERIALS (2017)

Review Chemistry, Physical

Carbon Anode Materials for Advanced Sodium-Ion Batteries

Hongshuai Hou et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Multidisciplinary

High-Density Microporous Li4Ti5O12 Microbars with Superior Rate Performance for Lithium-Ion Batteries

Linkai Tang et al.

ADVANCED SCIENCE (2017)

Article Energy & Fuels

Energy storage deployment and innovation for the clean energy transition

Noah Kittner et al.

NATURE ENERGY (2017)

Article Chemistry, Multidisciplinary

Engineering 2D Nanofluidic Li-Ion Transport Channels for Superior Electrochemical Energy Storage

Chunshuang Yan et al.

ADVANCED MATERIALS (2017)

Article Chemistry, Multidisciplinary

Metal-Ion-Modified Black Phosphorus with Enhanced Stability and Transistor Performance

Zhinan Guo et al.

ADVANCED MATERIALS (2017)

Article Thermodynamics

Heat generation in lithium-ion batteries with different nominal capacities and chemistries

Ashkan Nazari et al.

APPLIED THERMAL ENGINEERING (2017)

Article Nanoscience & Nanotechnology

High-Rate Long-Life Pored Nanoribbon VNb9O25 Built by Interconnected Ultrafine Nanoparticles as Anode for Lithium-Ion Batteries

Shangshu Qian et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Review Chemistry, Inorganic & Nuclear

Li4Ti5O12-based energy conversion and storage systems: Status and prospects

Gaojie Xu et al.

COORDINATION CHEMISTRY REVIEWS (2017)

Article Nanoscience & Nanotechnology

Study on the Electrochemical Reaction Mechanism of NiFe2O4 as a High -Performance Anode for Li-Ion Batteries

Mobinul Islam et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Multidisciplinary

Ultrathin-Nanosheet-Induced Synthesis of 3D Transition Metal Oxides Networks for Lithium Ion Battery Anodes

Shan Zhu et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Article Electrochemistry

Optimizing Areal Capacities through Understanding the Limitations of Lithium-Ion Electrodes

Kevin G. Gallagher et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Article Nanoscience & Nanotechnology

New Approach to Create TiO2(B)/Carbon Core/Shell Nanotubes: Ideal Structure for Enhanced Lithium Ion Storage

Xiaoyi Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Chemistry, Multidisciplinary

A Top-Down Strategy toward 3D Carbon Nanosheet Frameworks Decorated with Hollow Nanostructures for Superior Lithium Storage

Yanfeng Dong et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Article Chemistry, Multidisciplinary

Germanium Nanograin Decoration on Carbon Shell: Boosting Lithium-Storage Properties of Silicon Nanoparticles

Wei Luo et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Article Chemistry, Multidisciplinary

Surface Coordination of Black Phosphorus for Robust Air and Water Stability

Yuetao Zhao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Article Chemistry, Physical

Structural Modification of Self-Organized Nanoporous Niobium Oxide via Hydrogen Treatment

Kyungbae Kim et al.

CHEMISTRY OF MATERIALS (2016)

Article Chemistry, Inorganic & Nuclear

Chemical synthesis of germanium nanoparticles with uniform size as anode materials for lithium ion batteries

Liangbiao Wang et al.

DALTON TRANSACTIONS (2016)

Article Electrochemistry

Hydrothermal Synthesis of TiO2(B) Nanowires/CNTs as Anode Material for High Performance Lithium-ion Batteries

Rong Jiang et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2016)

Review Nanoscience & Nanotechnology

Recent Progress of TiO2-Based Anodes for Li Ion Batteries

Yu Liu et al.

JOURNAL OF NANOMATERIALS (2016)

Article Chemistry, Multidisciplinary

Covalent functionalization and passivation of exfoliated black phosphorus via aryl diazonium chemistry

Christopher R. Ryder et al.

NATURE CHEMISTRY (2016)

Article Chemistry, Physical

Encapsulating Sn Nanoparticles in Amorphous Carbon Nanotubes for Enhanced Lithium Storage Properties

Xiaosi Zhou et al.

ADVANCED ENERGY MATERIALS (2016)

Article Chemistry, Physical

Graphene/N-doped carbon sandwiched nanosheets with ultrahigh nitrogen doping for boosting lithium-ion batteries

Xianghong Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Chemistry, Physical

Binding TiO2-B nanosheets with N-doped carbon enables highly durable anodes for lithium-ion batteries

Chaoji Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Chemistry, Physical

TiNb2O7/graphene composites as high-rate anode materials for lithium/sodium ion batteries

Shuang Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Chemistry, Physical

Electrochemical performances and gassing behavior of high surface area titanium niobium oxides

Lucienne Buannic et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Review Chemistry, Physical

TiO2 as an active or supplemental material for lithium batteries

Taeseup Song et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Review Chemistry, Multidisciplinary

Advanced High Energy Density Secondary Batteries with Multi-Electron Reaction Materials

Renjie Chen et al.

ADVANCED SCIENCE (2016)

Article Energy & Fuels

Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries

Juliette Billaud et al.

NATURE ENERGY (2016)

Review Nanoscience & Nanotechnology

Promise and reality of post-lithium-ion batteries with high energy densities

Jang Wook Choi et al.

NATURE REVIEWS MATERIALS (2016)

Article Chemistry, Multidisciplinary

Understanding undesirable anode lithium plating issues in lithium-ion batteries

Qianqian Liu et al.

RSC ADVANCES (2016)

Article Nanoscience & Nanotechnology

Coating Lithium Titanate with Nitrogen-Doped Carbon by Simple Refluxing for High-Power Lithium-Ion Batteries

Du Hoang Long et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Chemistry, Multidisciplinary

TiNb6O17: a new electrode material for lithium-ion batteries

Chunfu Lin et al.

CHEMICAL COMMUNICATIONS (2015)

Article Chemistry, Multidisciplinary

Hierarchical tubular structures constructed from ultrathin TiO2(B) nanosheets for highly reversible lithium storage

Han Hu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Article Chemistry, Physical

The role of defects on the structural and magnetic properties of Nb2O5

Leonilson K. S. Herval et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Article Chemistry, Physical

KOH etched graphite for fast chargeable lithium-ion batteries

Qian Cheng et al.

JOURNAL OF POWER SOURCES (2015)

Article Nanoscience & Nanotechnology

Metallic 1T phase MoS2 nanosheets as supercapacitor electrode materials

Muharrem Acerce et al.

NATURE NANOTECHNOLOGY (2015)

Article Multidisciplinary Sciences

The renaissance of black phosphorus

Xi Ling et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)

Article Multidisciplinary Sciences

Transport properties of pristine few-layer black phosphorus by van der Waals passivation in an inert atmosphere

Rostislav A. Doganov et al.

NATURE COMMUNICATIONS (2015)

Article Chemistry, Physical

Morphology-engineered and TiO2 (B)-introduced anatase TiO2 as an advanced anode material for lithium-ion batteries

Qinghua Tian et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Chemistry, Physical

Highly pseudocapacitive Nb-doped TiO2 high power anodes for lithium-ion batteries

Mechthild Luebke et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Review Chemistry, Multidisciplinary

Towards greener and more sustainable batteries for electrical energy storage

D. Larcher et al.

NATURE CHEMISTRY (2015)

Article Chemistry, Multidisciplinary

Phosphorene: An Unexplored 2D Semiconductor with a High Hole Mobility

Han Liu et al.

ACS NANO (2014)

Article Chemistry, Physical

In Situ TEM on the Reversibility of Nanosized Sn Anodes during the Electrochemical Reaction

Qianqian Li et al.

CHEMISTRY OF MATERIALS (2014)

Article Electrochemistry

Mesoporous Spinel Li4Ti5O12 Nanoparticles for High Rate Lithium-ion Battery Anodes

Weijian Liu et al.

ELECTROCHIMICA ACTA (2014)

Article Chemistry, Physical

Improved capacity and rate capability of Fe2O3 modified Li4Ti5O12 anode material

Baofeng Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Article Chemistry, Physical

Boron-doped TiO2 anode materials for high-rate lithium ion batteries

Jae-Hun Jeong et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Article Chemistry, Physical

Nitridation Br-doped Li4Ti5O12 anode for high rate lithium ion batteries

Jiaqing Wang et al.

JOURNAL OF POWER SOURCES (2014)

Article Electrochemistry

Atomistic Structure and Ab Initio Electrochemical Properties of Li4Ti5O12 Defect Spinel for Li Ion Batteries

Ping-chun Tsai et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Article Chemistry, Multidisciplinary

Effective Passivation of Exfoliated Black Phosphorus Transistors against Ambient Degradation

Joshua D. Wood et al.

NANO LETTERS (2014)

Article Materials Science, Multidisciplinary

On the challenge of developing advanced technologies for electrochemical energy storage and conversion

Hyun Deog Yoo et al.

MATERIALS TODAY (2014)

Article Chemistry, Physical

Mesoporous TiO2-Sn/C Core-Shell Nanowire Arrays as High-Performance 3D Anodes for Li-Ion Batteries

Jin-Yun Liao et al.

ADVANCED ENERGY MATERIALS (2014)

Article Chemistry, Multidisciplinary

Nanostructured Si(i-x)Gex for Tunable Thin Film Lithium-Ion Battery Anodes

Paul R. Abel et al.

ACS NANO (2013)

Article Electrochemistry

A nanoparticle Mg-doped Li4Ti5O12 for high rate lithium-ion batteries

Wei Wang et al.

ELECTROCHIMICA ACTA (2013)

Article Chemistry, Multidisciplinary

Nanostructured carbon-metal oxide composite electrodes for supercapacitors: a review

Mingjia Zhi et al.

NANOSCALE (2013)

Article Chemistry, Physical

High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance

Veronica Augustyn et al.

NATURE MATERIALS (2013)

Article Chemistry, Physical

Germanium-tin alloy nanocrystals for high-performance lithium ion batteries

Yong Jae Cho et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)

Article Chemistry, Multidisciplinary

Nanosize Storage Properties in Spinel Li4Ti5O12 Explained by Anisotropic Surface Lithium Insertion

Swapna Ganapathy et al.

ACS NANO (2012)

Article Chemistry, Multidisciplinary

Size-Dependent Fracture of Silicon Nanoparticles During Lithiation

Xiao Hua Liu et al.

ACS NANO (2012)

Review Chemistry, Multidisciplinary

Recent Advances in Metal Oxide-based Electrode Architecture Design for Electrochemical Energy Storage

Jian Jiang et al.

ADVANCED MATERIALS (2012)

Article Chemistry, Multidisciplinary

Hydrogenated Li4Ti5O12 Nanowire Arrays for High Rate Lithium Ion Batteries

Laifa Shen et al.

ADVANCED MATERIALS (2012)

Review Chemistry, Multidisciplinary

Ti-based compounds as anode materials for Li-ion batteries

Guan-Nan Zhu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Article Chemistry, Multidisciplinary

Diffusion Mechanism of Lithium Ion through Basal Plane of Layered Graphene

Fei Yao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

Article Chemistry, Multidisciplinary

Electrospun Core-Shell Fibers for Robust Silicon Nanoparticle-Based Lithium Ion Battery Anodes

Tae Hoon Hwang et al.

NANO LETTERS (2012)

Review Environmental Sciences

Realizing the electric-vehicle revolution

Martino Tran et al.

NATURE CLIMATE CHANGE (2012)

Article Chemistry, Physical

New Anode Framework for Rechargeable Lithium Batteries

Jian-Tao Han et al.

CHEMISTRY OF MATERIALS (2011)

Review Chemistry, Multidisciplinary

Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries

Liwen Ji et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Article Chemistry, Physical

Incorporation of phosphorus into the surface of natural graphite anode for lithium ion batteries

Min-Sik Park et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Article Materials Science, Multidisciplinary

Size-dependent fracture of Si nanowire battery anodes

Ill Ryu et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2011)

Article Chemistry, Multidisciplinary

Anisotropic Swelling and Fracture of Silicon Nanowires during Lithiation

Xiao Hua Liu et al.

NANO LETTERS (2011)

Review Chemistry, Physical

Challenges for Rechargeable Li Batteries

John B. Goodenough et al.

CHEMISTRY OF MATERIALS (2010)

Article Chemistry, Physical

In situ NMR observation of the formation of metallic lithium microstructures in lithium batteries

Rangeet Bhattacharyya et al.

NATURE MATERIALS (2010)

Review Chemistry, Multidisciplinary

Green energy storage materials: Nanostructured TiO2 and Sn-based anodes for lithium-ion batteries

Da Deng et al.

ENERGY & ENVIRONMENTAL SCIENCE (2009)

Article Electrochemistry

Electrochemical characteristics of spinel Li4Ti5O12 discharged to 0.01 V

Hao Ge et al.

ELECTROCHEMISTRY COMMUNICATIONS (2008)

Review Chemistry, Physical

Materials for electrochemical capacitors

Patrice Simon et al.

NATURE MATERIALS (2008)

Article Chemistry, Physical

Li4Ti2.5Cr2.5O12 as anode material for lithium battery

M. Ganesan

IONICS (2008)

Article Chemistry, Multidisciplinary

Black phosphorus and its composite for lithium rechargeable batteries

Cheol-Min Park et al.

ADVANCED MATERIALS (2007)

Article Chemistry, Multidisciplinary

Sn78Ge22@carbon core-shell nanowires as fast and high-capacity lithium storage media

Hyojin Lee et al.

NANO LETTERS (2007)

Review Chemistry, Physical

Ageing mechanisms in lithium-ion batteries

J Vetter et al.

JOURNAL OF POWER SOURCES (2005)

Article Electrochemistry

Thermal stability of the solid electrolyte interface on carbon electrodes of lithium batteries

HH Lee et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

Review Chemistry, Multidisciplinary

Nonaqueous liquid electrolytes for lithium-based rechargeable batteries

K Xu

CHEMICAL REVIEWS (2004)

Article Chemistry, Physical

Structural considerations of intermetallic electrodes for lithium batteries

MM Thackeray et al.

JOURNAL OF POWER SOURCES (2003)

Article Electrochemistry

Effect of particle size on lithium intercalation into alpha-Fe2O3

D Larcher et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)

Article Electrochemistry

Facile synthesis of nanocrystalline Li4Ti5O12 (spinel) exhibiting fast Li insertion

L Kavan et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2002)

Article Chemistry, Physical

Lithium ion secondary batteries; past 10 years and the future

Y Nishi

JOURNAL OF POWER SOURCES (2001)

Article Chemistry, Physical

Experimental confirmation of the model for microcracking during lithium charging in single-phase alloys

J Wolfenstine et al.

JOURNAL OF POWER SOURCES (2000)