4.8 Article

Inkjet-Printed rGO/binary Metal Oxide Sensor for Predictive Gas Sensing in a Mixed Environment

Related references

Note: Only part of the references are listed.
Article Nanoscience & Nanotechnology

Selectivity of a ZnO@ZIF-71@PDMS Nanorod Array Gas Sensor Enhanced by Coating a Polymer Selective Separation Membrane

Tingting Zhou et al.

Summary: The study presents a method to enhance acetone gas sensor selectivity by synthesizing PDMS membrane on the surface of ZnO@ZIF-71, effectively solving the interference issue caused by ethanol.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Materials Science, Ceramics

Light-activated room-temperature gas sensors based on metal oxide nanostructures: A review on recent advances

Jing Wang et al.

Summary: This review discusses recent advancements in the field of light-activated gas sensors based on metal oxide nanostructures, focusing on improving gas sensing performance and power consumption. The effects of light activation on the behavior of metal oxide nanostructures as gas sensors are summarized, along with possible strategies for enhancing their performance. Additionally, recent developments in light sources and device structures towards low power gas sensor systems are also discussed.

CERAMICS INTERNATIONAL (2021)

Article Chemistry, Analytical

Discrimination of gases with a single chemiresistive multi-gas sensor using temperature sweeping and machine learning

Srinivasulu Kanaparthi et al.

Summary: A method was proposed to discriminate three gases using a single metal oxide gas sensor with temperature sweeping to reduce power consumption. This approach significantly decreases power consumption compared to traditional sensors and opens the way for widespread use in practical applications where reducing power consumption is necessary.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

Statistical shape analysis pre-processing of temperature modulated metal oxide gas sensor response for machine learning improved selectivity of gases detection in real atmospheric conditions

Valeriy V. Krivetskiy et al.

Summary: Development of new signal processing approaches is crucial for enhancing the reliability of metal oxide gas sensor performance in real atmospheric conditions. Advantages of statistical shape analysis (SSA) method over other signal pre-processing techniques have been demonstrated, showing improved detection selectivity for chemically related gases such as methane and propane. The proposed data preprocessing algorithm has shown less sensitivity to sensor response and baseline drift compared to other methods, even during extended periods of continuous operation with periods of inactivity.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Physical

Tailoring the selectivity of ultralow-power heterojunction gas sensors by noble metal nanoparticle functionalization

Oleg Lupan et al.

Summary: Heterojunctions have been utilized in solar cells and optoelectronics, and recent advances have shown their potential as gas sensors with controllable selectivity through nanoparticle surface functionalization. The fabricated sensors demonstrate excellent performance with ultra-low power consumption, paving the way for the development of versatile sensors for individual gas detection in mixtures.

NANO ENERGY (2021)

Article Chemistry, Multidisciplinary

Fractal Design for Advancing the Performance of Chemoresistive Sensors

Kamrul Hassan et al.

Summary: The rapid advancement of IoT-enabled applications and connected automation in sensing technologies is crucial for future intelligent systems. Enhancing sensor performance through material optimization is essential. A bioinspired fractal approach shows potential for improved sensor design and performance.

ACS SENSORS (2021)

Article Chemistry, Multidisciplinary

Impact of a Diverse Combination of Metal Oxide Gas Sensors on Machine Learning-Based Gas Recognition in Mixed Gases

Garam Bae et al.

Summary: This study systematically investigates the impact of selectivity for a target gas on the prediction accuracy of gas concentration using machine learning. The results show a proportional relationship between selectivity factor and prediction accuracy, suggesting that combining sensors with different selectivity factors can enhance the prediction accuracy.

ACS OMEGA (2021)

Review Chemistry, Multidisciplinary

Printed aerogels: chemistry, processing, and applications

Junzong Feng et al.

Summary: Aerogels, as a lightweight and porous nanomaterial, have attracted interest in both academia and industry. However, their modest mechanical durability poses challenges, which bottom-up additive manufacturing technology has the potential to address. This technology has led to the emergence of a new interdisciplinary research area combining aerogel and printing technology, pushing the boundaries of structure and performance while broadening their application scope.

CHEMICAL SOCIETY REVIEWS (2021)

Review Chemistry, Multidisciplinary

Machine Learning in Nanoscience: Big Data at Small Scales

Keith A. Brown et al.

NANO LETTERS (2020)

Article Materials Science, Multidisciplinary

Toward a Highly Functional Hybrid ZnO Nanofiber-rGO Gas Sensor

Talieh Salehi et al.

ADVANCED ENGINEERING MATERIALS (2020)

Article Multidisciplinary Sciences

A general ink formulation of 2D crystals for wafer-scale inkjet printing

Guohua Hu et al.

SCIENCE ADVANCES (2020)

Article Chemistry, Analytical

Machine-intelligent inkjet-printed α-Fe2O3/rGO towards NO2 quantification in ambient humidity

Tien-Chun Wu et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Review Automation & Control Systems

Machine Learning-Enabled Smart Sensor Systems

Nam Ha et al.

ADVANCED INTELLIGENT SYSTEMS (2020)

Review Chemistry, Multidisciplinary

Electrically-Transduced Chemical Sensors Based on Two Dimensional Nanomaterials

Zheng Meng et al.

CHEMICAL REVIEWS (2019)

Article Nanoscience & Nanotechnology

Inkjet-printed CMOS-integrated graphene metal oxide sensors for breath analysis

Tien-Chun Wu et al.

NPJ 2D MATERIALS AND APPLICATIONS (2019)

Review Materials Science, Multidisciplinary

Machine learning in materials science

Jing Wei et al.

INFOMAT (2019)

Article Engineering, Electrical & Electronic

H2S Sensing in Dry and Humid H2 Environment With p-Type CuO Thick-Film Gas Sensors

Barbara Urasinska-Wojcik et al.

IEEE SENSORS JOURNAL (2018)

Review Multidisciplinary Sciences

Machine learning for molecular and materials science

Keith T. Butler et al.

NATURE (2018)

Article Materials Science, Multidisciplinary

Effect of IDE placement on response in metal oxide gas sensors

Rahul Prajesh et al.

MATERIALS RESEARCH EXPRESS (2018)

Article Chemistry, Analytical

P-type Co3O4 nanomaterials-based gas sensor: Preparation and acetone sensing performance

Tingting Zhou et al.

SENSORS AND ACTUATORS B-CHEMICAL (2017)

Review Nanoscience & Nanotechnology

Flexible Graphene-Based Wearable Gas and Chemical Sensors

Eric Singh et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Physical

Role of oxygen functionality on the band structure evolution and conductance of reduced graphene oxide

Rajarshi Roy et al.

CHEMICAL PHYSICS LETTERS (2017)

Article Chemistry, Multidisciplinary

Chemical Discrimination with an Unmodified Graphene Chemical Sensor

Eric C. Nallon et al.

ACS SENSORS (2016)

Article Nanoscience & Nanotechnology

MOF-Based Membrane Encapsulated ZnO Nanowires for Enhanced Gas Sensor Selectivity

Martin Drobek et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Nanoscience & Nanotechnology

Chemiresistive Electronic Nose toward Detection of Biomarkers in Exhaled Breath

Hi Gyu Moon et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Engineering, Electrical & Electronic

An Empirical Study for PCA- and LDA-Based Feature Reduction for Gas Identification

Muhammad Ali Akbar et al.

IEEE SENSORS JOURNAL (2016)

Review Chemistry, Analytical

Graphene-metal oxide nanohybrids for toxic gas sensor: A review

Shyamasree Gupta Chatterjee et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

Article Chemistry, Physical

Solid-state gas sensors for high temperature applications - a review

Yixin Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Article Chemistry, Multidisciplinary

Synthesis of CuO nano- and micro-structures and their Raman spectroscopic studies

Wenzhong Wang et al.

CRYSTENGCOMM (2010)

Article Chemistry, Physical

Detection of individual gas molecules adsorbed on graphene

F. Schedin et al.

NATURE MATERIALS (2007)

Article Chemistry, Multidisciplinary

Graphene sensor achieves ultimate sensitivity

Simon Hadlington

CHEMISTRY WORLD (2007)