4.8 Article

Synergetic Effect of Alkali-Site Substitution and Oxygen Vacancy Boosting Vanadate Cathode for Super-Stable Potassium and Zinc Storage

Related references

Note: Only part of the references are listed.
Review Chemistry, Multidisciplinary

Design Strategies for High-Energy-Density Aqueous Zinc Batteries

Pengchao Ruan et al.

Summary: This review comprehensively summarizes the rational design strategies of high-energy-density zinc batteries, critically analyzes the positive effects and potential issues of these strategies, and outlines the challenges and perspectives for further development.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Chemistry, Multidisciplinary

Synergetic stability enhancement with magnesium and calcium ion substitution for Ni/Mn-based P2-type sodium-ion battery cathodes

Hongwei Fu et al.

Summary: The study successfully doped magnesium and calcium ions into Na0.67Ni0.33Mn0.67O2 to improve cycling endurance by reducing O-type stacking in the high-voltage region, leading to a decrease in capacity. Density functional theory studies showed that the introduction of Mg2+ and Ca2+ made high-voltage reactions less accessible.

CHEMICAL SCIENCE (2022)

Article Multidisciplinary Sciences

Tuning Zn2+ coordination tunnel by hierarchical gel electrolyte for dendrite-free zinc anode

Bingyao Zhang et al.

Summary: This study effectively addresses the issues of dendrite growth and side reactions in zinc-ion batteries by using a highly-confined tannic acid modified sodium alginate composite gel electrolyte. The modified electrolyte guides and regulates zinc deposition, resulting in steady zinc plating/stripping behavior and high cycle stability.

SCIENCE BULLETIN (2022)

Article Chemistry, Physical

Dual ions intercalation drives high-performance aqueous Zn-ion storage on birnessite-type manganese oxides cathode

Fengyang Jing et al.

Summary: This study improves the Zn2+ transport and structural stability of aqueous zinc-ion batteries by introducing magnesium and potassium ions, achieving outstanding electrochemical performance with ultrahigh reversible capacity and excellent cycling stability.

ENERGY STORAGE MATERIALS (2022)

Review Chemistry, Multidisciplinary

Challenges and Strategies toward Cathode Materials for Rechargeable Potassium-Ion Batteries

Shude Liu et al.

Summary: With increasing demand for grid-scale energy storage, potassium-ion batteries (PIBs) have emerged as promising complements or alternatives to commercial lithium-ion batteries. However, the low energy density and unstable cycle life of cathode materials are current challenges that need to be addressed in the development of next-generation PIBs.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Ammonium-Ion Storage Using Electrodeposited Manganese Oxides

Yu Song et al.

Summary: This study investigates NH4+-storage chemistry using electrodeposited manganese oxide (MnOx) for the first time, and reveals the significant role of NH4Ac concentration in NH4+ storage for MnOx. The transformed MnOx with a layered structure shows high specific capacity and good cycling stability in NH4Ac, outperforming current NH4+ hosting materials. These findings highlight the potential of layered MnOx as a new prototype for NH4+-based energy storage and contribute to a deeper understanding of the NH4+-storage mechanism in metal oxides.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Review Chemistry, Multidisciplinary

Promises and Challenges of Next-Generation Beyond Li-ion Batteries for Electric Vehicles and Grid Decarbonization

Yaosen Tian et al.

Summary: The significant advancements in performance and cost of lithium-ion batteries have made them the preferred technology for electrical energy storage, but they may not meet all the requirements for large-scale applications. Hence, exploration of beyond lithium-ion technologies including sodium-ion batteries, potassium-ion batteries, all-solid-state batteries, and multivalent batteries is accelerating.

CHEMICAL REVIEWS (2021)

Article Nanoscience & Nanotechnology

Electrolyte Concentration Regulation Boosting Zinc Storage Stability of High-Capacity K0.486V2O5 Cathode for Bendable Quasi-Solid-State Zinc Ion Batteries

Linpo Li et al.

Summary: By regulating the concentration of ZnCl2 electrolyte, the cycle life of Vanadates in AZIBs can be greatly improved without the need to approach the water-in-salt threshold. Additionally, a novel CMC-ZnCl2 gel electrolyte with high ionic conductivity was designed for the first time, enabling the assembly of a quasi-solid-state AZIB with excellent stability and energy density.

NANO-MICRO LETTERS (2021)

Article Chemistry, Physical

A hafnium oxide-coated dendrite-free zinc anode for rechargeable aqueous zinc-ion batteries

Bin Li et al.

Summary: In this study, a simple strategy involving application of a HfO2 coating was used to guide uniform deposition of Zn2+ to suppress formation of zinc dendrites, resulting in improved electrochemical performance of zinc anode. The HfO2-coated zinc anode demonstrated lower voltage hysteresis and better cycling performance in zinc-zinc symmetric cells and Zn-MnO2 full cells, showing potential for future development of rechargeable aqueous zinc-ion batteries.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Nanoscience & Nanotechnology

Understanding the Effect of Interplanar Space and Preintercalated Cations of Vanadate Cathode Materials on Potassium-Ion Battery Performance

Yuqin Fan et al.

Summary: Research has shown that layered vanadates can be promising cathode materials for potassium-ion batteries, with the ability to enhance electrochemical performance and cycling stability by controlling interlayer distance and preintercalating potassium ions.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Materials Science, Multidisciplinary

Oxygen-deficient ammonium vanadate for flexible aqueous zinc batteries with high energy density and rate capability at-30 °C

Tao He et al.

Summary: The oxygen-deficient NH4V4O10-x·nH(2)O (NVOH) microspheres are synthesized and used as cathodes for aqueous zinc batteries (AZBs), demonstrating a high energy density, fast Zn2+ diffusion, and excellent electrochemical performance over a wide temperature range. The NVOH shows a capacity retention of 100% after 100 cycles at 0.1 A g(-1) and around 94% after 2600 cycles at 2 A g(-1) and -30 degrees C. Investigation into the mechanism of the process reveals that the surface capacitive behaviors contribute dominantly to the capacity, while diffusion-controlled capacity decay causes the capacity attenuation. Flexible AZBs can power portable electronics steadily under different bending states, showing great potential for wide-temperature wearable devices.

MATERIALS TODAY (2021)

Article Electrochemistry

An Electrochemical Study on NH4VOPO4: Can Ion-Exchange Improve Side Reactions?

Isiksu Buyuker et al.

Summary: The electrochemical performance of NH4VOPO4 was investigated, showing that parasitic reactions can be mitigated and thermal stability improved by exchanging some NH4(+) with Na+.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Article Chemistry, Multidisciplinary

Toward a High-Performance Aqueous Zinc Ion Battery: Potassium Vanadate Nanobelts and Carbon Enhanced Zinc Foil

Nan Qiu et al.

Summary: Aqueous rechargeable zinc ion batteries with potassium vanadate nanobelts as a cathode show high discharge capacity and capacity retention, making them a promising option for high-performance aqueous zinc ion batteries. Additionally, an effective method demonstrated on the anode side can enhance the energy efficiency of the batteries.

NANO LETTERS (2021)

Article Chemistry, Multidisciplinary

A High-Rate and Ultrastable Aqueous Zinc-Ion Battery with a Novel MgV2O6•1.7H2O Nanobelt Cathode

Xiao Wang et al.

Summary: A novel vanadium-based oxide cathode based on MgV2O6 center dot 1.7H(2)O nanobelts has been developed, demonstrating high capacity, strong rate capability, stable cycling performance, and suitable energy density for high-performance zinc-ion storage devices.

SMALL (2021)

Article Multidisciplinary Sciences

Tuning local chemistry of P2 layered-oxide cathode for high energy and long cycles of sodium-ion battery

Chenchen Wang et al.

Summary: In this study, a layered P2-Na0.612K0.056MnO2 with large-sized K+ riveted in the Na-layers enables 0.9 Na+ (de)insertion with a reversible phase transition of P2-P'2. This cathode material demonstrates the highest specific capacity and energy density based on the redox of Mn3+/Mn4+, with high capacity retention after 100 cycles. This research provides insights into tunable chemical environments of transition-metal oxides for advanced cathode materials and promotes the development of sodium-ion batteries. High capacity and structural stable cathode materials remain challenges for sodium-ion batteries.

NATURE COMMUNICATIONS (2021)

Article Nanoscience & Nanotechnology

Enhanced Reversible Zinc Ion Intercalation in Deficient Ammonium Vanadate for High-Performance Aqueous Zinc-Ion Battery

Quan Zong et al.

Summary: This study utilized heat treatment to remove partial NH4+ ions, directly grew NH4V4O10 nanosheets on carbon cloth, and prepared deficient NH4V4O10 (NVO) material with enlarged interlayer spacing, facilitating fast zinc ion transport and high storage capacity, ensuring high electrochemical reaction reversibility and structural stability.

NANO-MICRO LETTERS (2021)

Article Chemistry, Multidisciplinary

Phase Compatible NiFe2O4 Coating Tunes Oxygen Redox in Li-Rich Layered Oxide

Jiming Peng et al.

Summary: A surface-coating strategy using NiFe2O4 was developed to enhance the performance of Li-rich layered oxides in lithium-ion batteries, resulting in improved cycle stability and rate capability. This strategy effectively traps surface lattice oxygen and restrains cation migration, decoupling the surface oxygen redox from cation movement.

ACS NANO (2021)

Review Chemistry, Multidisciplinary

Advances and Perspectives of Cathode Storage Chemistry in Aqueous Zinc-Ion Batteries

Xiao Wang et al.

Summary: This review discusses the key challenges of rechargeable aqueous zinc-ion batteries, analyzing the structural features and electrochemical properties of different cathode materials, and proposing various electrode design strategies to guide future research activities. The focus is mainly on achieving high energy density and durable cathode materials.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

Bilayered VOPO4.2H2O Nanosheets with High-Concentration Oxygen Vacancies for High-Performance Aqueous Zinc-Ion Batteries

By Zeyi Wu et al.

Summary: A bilayer-structured VOPO4.2H(2)O (bilayer-VOP) nanosheet with high-concentration oxygen vacancies was developed through a facile liquid-exfoliation strategy. The nanosheets showed superior properties in zinc-ion transport coefficient and electron conductivity, leading to outstanding performance in rechargeable zinc-ion batteries.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Chemistry, Multidisciplinary

High-Performance Cathode Materials for Potassium-Ion Batteries: Structural Design and Electrochemical Properties

Yan-Song Xu et al.

Summary: Potassium-ion batteries (PIBs) are gaining research attention as an alternative energy storage system to lithium-ion batteries (LIBs) due to their advantage in potassium reserves. Finding suitable electrode materials, especially cathode materials that can withstand the serious structural deformation during continuous potassium intercalation/deintercalation, is crucial for stable electrochemical performance. The relationship between material lattice frameworks and performance is discussed, along with potential strategies for future development of PIBs.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Oxygen defect enriched (NH4)2V10O25.8H2O nanosheets for superior aqueous zinc-ion batteries

Jin Cao et al.

Summary: In this study, an advanced cathode material (NH4)2V10O25.8H2O (NVOD) with oxygen defects was reported for aqueous zinc-ion batteries, demonstrating excellent performance including high capacity, ultrahigh stability, and exceptional energy density, showing great potential for future applications.

NANO ENERGY (2021)

Article Chemistry, Physical

Capacity Fading Mechanisms in Ni-Rich Single-Crystal NCM Cathodes

Hoon-Hee Ryu et al.

Summary: The study found that despite the high resistance to microcracking, the electrochemical performance of single-crystal NCM cathodes is inferior to polycrystalline NCM cathodes in terms of capacity and cycling stability. During cycling, the lithium concentrations in single-crystal NCM cathodes become spatially inhomogeneous, leading to the coexistence of phases with different unit cell dimensions within a single particle, which affects lithium ion diffusion and causes rapid capacity fading.

ACS ENERGY LETTERS (2021)

Article Chemistry, Physical

pH-Buffer Contained Electrolyte for Self-Adjusted Cathode-Free Zn-MnO2 Batteries with Coexistence of Dual Mechanisms

Zhexuan Liu et al.

Summary: This study investigates a cathode-free Zn-MnO2 battery with dual mechanisms in a mild acidic environment, emphasizing the decisive effect of pH value in the electrolyte on the mechanisms. Through the use of acetic acid as a buffering additive, the fluctuation phenomenon during operation is effectively suppressed, achieving a self-adjusting mechanism and improving battery performance.

SMALL STRUCTURES (2021)

Article Chemistry, Physical

P3-Type K0.45Co1/12Mg1/12Mn5/6O2 as a superior cathode material for potassium-ion batteries with high structural reversibility ensured by Co-Mg Co-substitution

Jinji Liang et al.

Summary: Co-Mg co-substituted K0.45Co1/12Mg1/12Mn5/6O2, designed as a promising cathode material for potassium-ion batteries, effectively alleviates Jahn-Teller distortion induced by Mn3+ ions, leading to improved structural stability, cycling stability, and rate capability.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Multidisciplinary

A new material discovery platform of stable layered oxide cathodes for K-ion batteries

Sohyun Park et al.

Summary: A method combining machine learning and density functional theory is developed to design stable KxMnO2 for KIB applications. Experimental validation shows that the KMCO cathode exhibits improved K-storage properties with high power density and cycling stability.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Principles of interlayer-spacing regulation of layered vanadium phosphates for superior zinc-ion batteries

Linfeng Hu et al.

Summary: The study addresses the challenges of sluggish Zn2+ diffusion kinetics and poor cyclic stability in cathode materials for aqueous ZIBs by synthesizing PA-intercalated VOPO4·2H2O materials with different interlayer spacing. The optimized 16.5 angstrom spacing shows enhanced zinc-ion diffusion and cycling stability, leading to improved battery performance.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Physical

High-performance layered potassium vanadium oxide for K-ion batteries enabled by reduced long-range structural order

Xiaogang Niu et al.

Summary: Reducing the long-range structural order of layered K0.5V2O5 has been found to enhance its potassium ion storage performance, with nanocrystalline K0.5V2O5·0.5H2O exhibiting significantly improved cycling stability compared to its highly crystalline counterpart. The mechanism behind this enhanced stability may be attributed to phase transition-free pseudocapacitive potassium ion intercalation.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Multidisciplinary

Rational construction of K0.5V2O5 nanobelts/CNTs flexible cathode for multi-functional potassium-ion batteries

Xin Li et al.

Summary: The K0.5V2O5/CNTs hybrid film offers fast kinetics for electron transfer and ion transportation, as well as providing an elastic medium to buffer the large volume change of the K0.5V2O5 nanobelts during cycling. As a cathode for KIBs, the K0.5V2O5/CNTs electrode exhibits reversible discharge capacity, good cycling stability, and excellent rate performance.

NANOSCALE (2021)

Review Chemistry, Multidisciplinary

Potassium-ion batteries: outlook on present and future technologies

Xin Min et al.

Summary: Pursuing the advantages of potassium-ion batteries (PIBs) in terms of abundant resources and relatively high energy density, current research is mainly focused on optimizing cathode materials and anode reactions. Despite some challenges, research is actively ongoing to address the obstacles hindering PIBs' development.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Materials Science, Multidisciplinary

Rechargeable aqueous zinc-ion batteries: Mechanism, design strategies and future perspectives

Huanyan Liu et al.

Summary: Rechargeable aqueous zinc-ion batteries (ZIBs) are considered a promising energy storage solution for grid-scale applications due to their safety, eco-friendliness, and cost-effectiveness. Despite significant progress in developing efficient cathodes, anodes, and electrolytes, the understanding of ZIBs and their energy storage mechanisms is still in its early stages and requires further investigation for practical implementation. This review provides a comprehensive summary of the development of ZIBs, design strategies, challenges, and opportunities for practical viability.

MATERIALS TODAY (2021)

Article Chemistry, Multidisciplinary

Constructing Na-Ion Cathodes via Alkali-Site Substitution

Chenglong Zhao et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Review Chemistry, Multidisciplinary

Defect Engineering on Electrode Materials for Rechargeable Batteries

Yiqiong Zhang et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Physical

Multi-Scale Investigations of δ-Ni0.25V2O5•nH2O Cathode Materials in Aqueous Zinc-Ion Batteries

Jianwei Li et al.

ADVANCED ENERGY MATERIALS (2020)

Article Nanoscience & Nanotechnology

High-Voltage Operation of a V2O5 Cathode in a Concentrated Gel Polymer Electrolyte for High-Energy Aqueous Zinc Batteries

Huang Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Nanoscience & Nanotechnology

A High-Capacity Ammonium Vanadate Cathode for Zinc-Ion Battery

Qifei Li et al.

NANO-MICRO LETTERS (2020)

Article Chemistry, Multidisciplinary

Realizing Complete Solid-Solution Reaction in High Sodium Content P2-Type Cathode for High-Performance Sodium-Ion Batteries

Ting Jin et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Analytical

The MnO@N-doped carbon composite derived from electrospinning as cathode material for aqueous zinc ion battery

Fang Tang et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)

Review Materials Science, Multidisciplinary

Pseudocapacitive Vanadium-based Materials toward High-Rate Sodium-Ion Storage

Qiulong Wei et al.

ENERGY & ENVIRONMENTAL MATERIALS (2020)

Article Chemistry, Physical

A Layered Zn0.4VOPO4•0.8H2O Cathode for Robust and Stable Zn Ion Storage

Zeyi Wu et al.

ACS APPLIED ENERGY MATERIALS (2020)

Article Chemistry, Physical

Catalyzing zinc-ion intercalation in hydrated vanadates for aqueous zinc-ion batteries

Chaofeng Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Review Multidisciplinary Sciences

Approaching high-performance potassium-ion batteries via advanced design strategies and engineering

Wenchao Zhang et al.

SCIENCE ADVANCES (2019)

Article Chemistry, Multidisciplinary

Layered P2-Type K0.44Ni0.22Mn0.78O2 as a High-Performance Cathode for Potassium-Ion Batteries

Xinyuan Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

Tuning P2-Structured Cathode Material by Na-Site Mg Substitution for Na-Ion Batteries

Qin-Chao Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Article Chemistry, Multidisciplinary

Reconstructed Orthorhombic V2O5 Polyhedra for Fast Ion Diffusion in K-Ion Batteries

Yun-Hai Zhu et al.

Article Chemistry, Multidisciplinary

Expanded hydrated vanadate for high-performance aqueous zinc-ion batteries

Chaofeng Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Chemistry, Multidisciplinary

Cations mediating proton conductivity in an oxalate based microporous coordination polymer

Xing Meng et al.

NEW JOURNAL OF CHEMISTRY (2019)

Article Chemistry, Multidisciplinary

Layered Potassium Vanadate K0.5V2O5 as a Cathode Material for Nonaqueous Potassium Ion Batteries

Leqing Deng et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Chemistry, Multidisciplinary

Cryptomelane-Type KMn8O16 as Potential Cathode Material - for Aqueous Zinc Ion Battery

Jiajie Cui et al.

FRONTIERS IN CHEMISTRY (2018)

Article Chemistry, Multidisciplinary

Atomic layer deposition of vanadium oxide on carbon nanotubes for high-power supercapacitor electrodes

Sofiane Boukhalfa et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Article Chemistry, Multidisciplinary

V2O5-Anchored Carbon Nanotubes for Enhanced Electrochemical Energy Storage

M. Sathiya et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Article Chemistry, Physical

Electrochemical investigation of the P2-NaxCoO2 phase diagram

R. Berthelot et al.

NATURE MATERIALS (2011)

Article Chemistry, Inorganic & Nuclear

Nanocomposites with the layered structure of V2O5 center dot nH(2)O xerogel

V. L. Volkov et al.

RUSSIAN JOURNAL OF INORGANIC CHEMISTRY (2006)