Related references
Note: Only part of the references are listed.TRIP Steels: A Multiscale Computational Simulation and Experimental Study of Heat Treatment and Mechanical Behavior
Ioanna Papadioti et al.
MATERIALS (2020)
Composition and processing design of medium-Mn steels based on CALPHAD, SFE modeling, and genetic optimization
John S. Aristeidakis et al.
ACTA MATERIALIA (2020)
The impact of grain-scale strain localization on strain hardening of a high-Mn steel: Real-time tracking of the transition from the γ → ε → α′ transformation to twinning
I. R. Souza Filho et al.
ACTA MATERIALIA (2020)
A Descriptive Model on the Grain Size Dependence of Deformation and Martensitic Transformation in Austenitic Stainless Steel
Arka Mandal et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Deformation Mechanisms in Metastable Austenitic TRIP/TWIP Steels under Compressive Load Studied by in situ Synchrotron Radiation Diffraction
Christiane Ullrich et al.
ADVANCED ENGINEERING MATERIALS (2019)
A crystallographic extension to the Olson-Cohen model for predicting strain path dependence of martensitic transformation
Milovan Zecevic et al.
ACTA MATERIALIA (2019)
Constitutive modeling of TWIP/TRIP steels and numerical simulation of single impact during Surface Mechanical Attrition Treatment
Z. Chen et al.
MECHANICS OF MATERIALS (2018)
Critical resolved shear stress for slip and twin nucleation in single crystalline FeNiCoCrMn high entropy alloy
Wael Abuzaid et al.
MATERIALS CHARACTERIZATION (2017)
Alloy Design Based on Computational Thermodynamics and Multi-objective Optimization: The Case of Medium-Mn Steels
John S. Aristeidakis et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Tensile Properties of Medium Mn Steel with a Bimodal UFG α plus γ and Coarse δ-Ferrite Microstructure
Seonjong Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Understanding martensite and twin formation in austenitic steels: A model describing TRIP and TWIP effects
E. I. Galindo-Nava et al.
ACTA MATERIALIA (2017)
Micromechanical finite element analysis of strain partitioning in multiphase medium manganese TWIP plus TRIP steel
Marat I. Latypov et al.
ACTA MATERIALIA (2016)
A methodology for the estimation of the effective yield function of isotropic composites
I. Papadioti et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
In situ synchrotron X-ray evaluation of strain-induced martensite in AISI 201 austenitic stainless steel during tensile testing
C. Gauss et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of martensitic phase transformation on the behavior of 304 austenitic stainless steel under tension
H. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
A constitutive model for the tensile behaviour of TWIP steels: Composition and temperature dependencies
Jee-Hyun Kang et al.
MATERIALS & DESIGN (2016)
Size and orientation effects in partial dislocation-mediated deformation of twinning-induced plasticity steel micro-pillars
Won Seok Choi et al.
ACTA MATERIALIA (2015)
Integrated computational materials design for high-performance alloys
Wei Xiong et al.
MRS BULLETIN (2015)
A Composite Modeling Analysis of the Deformation Behavior of Medium Manganese Steels
Radhakanta Rana et al.
STEEL RESEARCH INTERNATIONAL (2015)
Modelling twinning evolution during plastic deformation in hexagonal close-packed metals
Enrique I. Galindo-Nava
MATERIALS & DESIGN (2015)
The influence of manganese content on the stacking fault and austenite/ε-martensite interfacial energies in Fe-Mn-(Al-Si) steels investigated by experiment and theory
D. T. Pierce et al.
ACTA MATERIALIA (2014)
Kinetics of strain-induced transformation of dispersed austenite in low-alloy TRIP steels
G. N. Haidemenopoulos et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Impact of short-range ordering on yield strength of high manganese austenitic steels
Jee-Hyun Kang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Tensile Behavior of Intercritically Annealed 10 pct Mn Multi-phase Steel
Sangwon Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Temperature dependence of the flow stress of Fe-18Mn-0.6C-xA1 twinning-induced plasticity steel
Il-Chan Jung et al.
ACTA MATERIALIA (2013)
Constitutive Modeling of the Mechanical Properties of V-added Medium Manganese TRIP Steel
Seawoong Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Twinning and martensite in a 304 austenitic stainless steel
Y. F. Shen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
O. Bouaziz et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2011)
Analysis of Deformation Kinetics in Seven Body-Centered-Cubic Pure Metals Using a Two-Obstacle Model
Paul S. Follansbee
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Critical grain size for dislocation storage and consequences for strain hardening of nanocrystalline materials
O. Bouaziz et al.
SCRIPTA MATERIALIA (2010)
Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels
O. Bouaziz et al.
SCRIPTA MATERIALIA (2008)
Predicting twinning stress in fcc metals: Linking twin-energy pathways to twin nucleation
S. Kibey et al.
ACTA MATERIALIA (2007)
Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels
J. Talonen et al.
ACTA MATERIALIA (2007)
Elastic constants and internal friction of martensitic steel, ferritic-pearlitic steel, and α-iron
Sudook A. Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Iso-work increment assumption for heterogeneous material behavior modelling
O Bouaziz et al.
ADVANCED ENGINEERING MATERIALS (2004)
A physically based model. for TRIP-aided carbon steels behaviour
A Perlade et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
The isotropic shear modulus of multicomponent Fe-base solid solutions
G Ghosh et al.
ACTA MATERIALIA (2002)
Modelling of TWIP effect on work-hardening
O Bouaziz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Application of the Kocks-Mecking model to tensile deformation of an austenitic 25Cr-19Ni steel
N Tsuchida et al.
ACTA MATERIALIA (2001)
Influence of phase transformations on the mechanical properties of austenitic stainless steels
AA Lebedev et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2000)
Share Paper
