Related references
Note: Only part of the references are listed.Lithium Metal Electrode with Increased Air Stability and Robust Solid Electrolyte Interphase Realized by Silane Coupling Agent Modification
Yanyan Wang et al.
ADVANCED MATERIALS (2021)
Role of Residual Li and Oxygen Vacancies in Ni-rich Cathode Materials
Lingjun Li et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Interface stabilization via lithium bis(fluorosulfonyl)imide additive as a key for promoted performance of graphite∥LiCoO2 pouch cell under-20 °C
Hieu Quang Pham et al.
JOURNAL OF CHEMICAL PHYSICS (2020)
Cyclic Aminosilane-Based Additive Ensuring Stable Electrode-Electrolyte Interfaces in Li-Ion Batteries
Koeun Kim et al.
ADVANCED ENERGY MATERIALS (2020)
High-nickel layered oxide cathodes for lithium-based automotive batteries
Wangda Li et al.
NATURE ENERGY (2020)
Multifunctional electrolyte additive for improved interfacial stability in Ni-rich layered oxide full-cells
Hieu Quang Pham et al.
ENERGY STORAGE MATERIALS (2020)
Molecular design principles for polymeric binders in silicon anodes
Andrea Miranda et al.
MOLECULAR SYSTEMS DESIGN & ENGINEERING (2020)
Atomically dispersed iron hydroxide anchored on Pt for preferential oxidation of CO in H2
Lina Cao et al.
NATURE (2019)
Ultrathin ZrO2 on LiNi0.5Mn0.3Co0.2O2 electrode surface via atomic layer deposition for high-voltage operation in lithium-ion batteries
Jinhyeok Ahn et al.
APPLIED SURFACE SCIENCE (2019)
Non-flammable LiNi0.8Co0.1Mn0.1O2 cathode via functional binder; stabilizing high-voltage interface and performance for safer and high-energy lithium rechargeable batteries
Hieu Quang Pham et al.
ELECTROCHIMICA ACTA (2019)
A new strategy to improve the cyclic stability of high voltage lithium nickel manganese oxide cathode by poly(butyl methacrylate-acrylonitrile-styrene) terpolymer as co-binder in lithium ion batteries
Guanjie Li et al.
ELECTROCHIMICA ACTA (2019)
New Chemical Insights into the Beneficial Role of Al2O3 Cathode Coatings in Lithium-ion Cells
David S. Hall et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Simultaneously Dual Modification of Ni-Rich Layered Oxide Cathode for High-Energy Lithium-Ion Batteries
Huiping Yang et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Cuprite-coated Cu foam skeleton host enabling lateral growth of lithium dendrites for advanced Li metal batteries
Xin-Yang Yue et al.
ENERGY STORAGE MATERIALS (2019)
Application of Li2S to compensate for loss of active lithium in a Si-C anode
Yuanjie Zhan et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Exploring Chemical, Mechanical, and Electrical Functionalities of Binders for Advanced Energy-Storage Devices
Hao Chen et al.
CHEMICAL REVIEWS (2018)
Evolution of redox couples in Li- and Mn-rich cathode materials and mitigation of voltage fade by reducing oxygen release
Enyuan Hu et al.
NATURE ENERGY (2018)
Fluorinated Polyimide as a Novel High-Voltage Binder for High-Capacity Cathode of Lithium-Ion Batteries
Hieu Quang Pham et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Electrochemical Characteristics of Layered Transition Metal Oxide Cathode Materials for Lithium Ion Batteries: Surface, Bulk Behavior, and Thermal Properties
Chixia Tian et al.
ACCOUNTS OF CHEMICAL RESEARCH (2018)
Nickel-Rich Layered Cathode Materials for Automotive Lithium-Ion Batteries: Achievements and Perspectives
Seung-Taek Myung et al.
ACS ENERGY LETTERS (2017)
A comparative study of Si-containing electrolyte additives for lithium ion battery: Which one is better and why is it better
Kang Wang et al.
JOURNAL OF POWER SOURCES (2017)
Polymeric materials for lithium-ion cells
Bibin John et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2017)
Understanding the effects of surface reconstruction on the electrochemical cycling performance of the spinel LiNi0.5Mn1.5O4 cathode material at elevated temperatures
Hao Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Effect of Silyl Ether-functinoalized Dimethoxydimethylsilane on Electrochemical Performance of a Ni-rich NCM Cathode
Seol Heui Jang et al.
CHEMPHYSCHEM (2017)
Using Li2S to Compensate for the Loss of Active Lithium in Li-ion Batteries
Yuanjie Zhan et al.
ELECTROCHIMICA ACTA (2017)
Water-Soluble Sericin Protein Enabling Stable Solid-Electrolyte Interphase for Fast Charging High Voltage Battery Electrode
Yuxin Tang et al.
ADVANCED MATERIALS (2017)
Investigating the influence of high temperatures on the cycling stability of a LiNi0.6Co0.2Mn0.2O2 cathode using an innovative electrolyte additive
Bangwei Deng et al.
ELECTROCHIMICA ACTA (2017)
Epicyanohydrin as an Interface Stabilizer Agent for Cathodes of Li-Ion Batteries
Arailym Nurpeissova et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Mechanistic Insight in the Function of Phosphite Additives for Protection of LiNi0.5Co0.2Mn0.3O2 Cathode in High Voltage Li-Ion Cells
Meinan He et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Influence of electrolyte additives on the cathode electrolyte interphase (CEI) formation on LiNi1/3Mn1/3Co1/3O2 in half cells with Li metal counter electrode
Yunxian Qian et al.
JOURNAL OF POWER SOURCES (2016)
The Effects of a Ternary Electrolyte Additive System on the Electrode/Electrolyte Interfaces in High Voltage Li-Ion Cells
Lenaic Madec et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Decomposition of LiPF6 in High Energy Lithium-Ion Batteries Studied with Online Electrochemical Mass Spectrometry
Aurelie Gueguen et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Learning from Overpotentials in Lithium Ion Batteries: A Case Study on the LiNi1/3Co1/3Mn1/3O2 (NCM) Cathode
Johannes Kasnatscheew et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Preparation and characterization of room temperature vulcanized silicone rubber using alpha-amine ketoximesilanes as auto-catalyzed cross-linkers
Qian Zhao et al.
RSC ADVANCES (2016)
New insights into the structure-property relationship of high-voltage electrolyte components for lithium-ion batteries using the pKa value
Dennis Roman Gallus et al.
ELECTROCHIMICA ACTA (2015)
Preparation and characterization of 3-chloropropyl polysiloxane-based heat-curable silicone rubber using polyamidoamine dendrimers as cross-linkers
Fuying Dong et al.
REACTIVE & FUNCTIONAL POLYMERS (2015)
Lithium Polyacrylate (LiPAA) as an Advanced Binder and a Passivating Agent for High-Voltage Li-Ion Batteries
Nicholas P. W. Pieczonka et al.
ADVANCED ENERGY MATERIALS (2015)
Structural Changes and Thermal Stability of Charged LiNixMnyCozO2 Cathode Materials Studied by Combined In Situ Time-Resolved XRD and Mass Spectroscopy
Seong-Min Bak et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Improvement of High Voltage Cyclic Performance by Novel Binder for High Energy Lithium Ion Battery Application
Mayumi Kaneko et al.
17TH INTERNATIONAL MEETING ON LITHIUM BATTERIES (IMLB 2014) (2014)
Cross-linkable urethane acrylate oligomers as binders for lithium-ion battery
Zheng Xue et al.
ELECTROCHEMISTRY COMMUNICATIONS (2013)
Understanding the capacity fading mechanism in LiNi0.5Mn1.5O4/graphite Li-ion batteries
Jung-Hyun Kim et al.
ELECTROCHIMICA ACTA (2013)
Understanding Transition-Metal Dissolution Behavior in LiNi0.5Mn1.5O4 High-Voltage Spinel for Lithium Ion Batteries
Nicholas P. W. Pieczonka et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2013)
Impact of Lithium Bis(oxalate)borate Electrolyte Additive on the Performance of High-Voltage Spinel/Graphite Li-Ion Batteries
Nicholas P. W. Pieczonka et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2013)
Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x=1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries
Hyung-Joo Noh et al.
JOURNAL OF POWER SOURCES (2013)
Coking- and Sintering-Resistant Palladium Catalysts Achieved Through Atomic Layer Deposition
Junling Lu et al.
SCIENCE (2012)
A comparative study of polyacrylic acid and poly(vinylidene difluoride) binders for spherical natural graphite/LiFePO4 electrodes and cells
Jin Chong et al.
JOURNAL OF POWER SOURCES (2011)
Atomic Layer Deposition: An Overview
Steven M. George
CHEMICAL REVIEWS (2010)
Electrolyte Reactions with the Surface of High Voltage LiNi0.5Mn1.5O4 Cathodes for Lithium-Ion Batteries
Li Yang et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2010)
Lithium polyacrylate as a binder for tin-cobalt-carbon negative electrodes in lithium-ion batteries
Jing Li et al.
ELECTROCHIMICA ACTA (2010)
A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu
Stefan Grimme et al.
JOURNAL OF CHEMICAL PHYSICS (2010)
Key challenges in future Li-battery research
J. -M. Tarascon
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2010)
Electrochemical and Structural Study of the Layered, Li-Excess Lithium-Ion Battery Electrode Material Li[Li1/9Ni1/3Mn5/9]O2
Meng Jiang et al.
CHEMISTRY OF MATERIALS (2009)
Polyacrylate Modifier for Graphite Anode of Lithium-Ion Batteries
S. Komaba et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2009)
Design of electrolyte solutions for Li and Li-ion batteries: a review
D Aurbach et al.
ELECTROCHIMICA ACTA (2004)
Lithium batteries and cathode materials
MS Whittingham
CHEMICAL REVIEWS (2004)
Issues and challenges facing rechargeable lithium batteries
JM Tarascon et al.
NATURE (2001)
Share Paper
