Related references
Note: Only part of the references are listed.Phase and grain size inhomogeneity and their influences on creep behavior of Co-Cr-Mo alloy additive manufactured by electron beam melting
Shi-Hai Sun et al.
ACTA MATERIALIA (2015)
Influence of the Scanning Strategy on the Microstructure and Mechanical Properties in Selective Electron Beam Melting of Ti-6Al-4V
Thorsten Scharowsky et al.
ADVANCED ENGINEERING MATERIALS (2015)
Solution Heat Treatment of the Single Crystal Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
Markus Ramsperger et al.
ADVANCED ENGINEERING MATERIALS (2015)
Efficient hydrogen release from perhydro-N-ethylcarbazole using catalyst-coated metallic structures produced by selective electron beam melting
W. Peters et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Microstructure of γ-titanium aluminide processed by selective laser melting at elevated temperatures
Joachim Gussone et al.
INTERMETALLICS (2015)
Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting
H. P. Tang et al.
JOM (2015)
Additive Manufacturing of Metal Cellular Structures: Design and Fabrication
Li Yang et al.
JOM (2015)
Novel powder/solid composites possessing low Young's modulus and tunable energy absorption capacity, fabricated by electron beam melting, for biomedical applications
Naoko Ikeo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effects of scanning parameters on material deposition during Electron Beam Selective Melting of Ti-6Al-4V powder
Chao Guo et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
XCT analysis of the influence of melt strategies on defect population in Ti-6Al-4V components manufactured by Selective Electron Beam Melting
S. Tammas-Williams et al.
MATERIALS CHARACTERIZATION (2015)
Process development for the manufacturing of 99.94% pure copper via selective electron beam melting
Matthias A. Lodes et al.
MATERIALS LETTERS (2015)
Additive manufacturing of a high niobium-containing titanium aluminide alloy by selective electron beam melting
H. P. Tang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering
L. M. Sochalski-Kolbus et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Additive manufacturing of Trabecular Titanium orthopedic implants
M. Regis et al.
MRS BULLETIN (2015)
The influence of heat accumulation on the surface roughness in powder-bed additive manufacturing
Mahdi Jamshidinia et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2015)
A systematic approach to identify cellular auxetic materials
Carolin Koerner et al.
SMART MATERIALS AND STRUCTURES (2015)
Metallurgy of additive manufacturing: Examples from electron beam melting
L. E. Murr
ADDITIVE MANUFACTURING (2015)
Influence of cell shape on mechanical properties of Ti-6Al-4V meshes fabricated by electron beam melting method
S. J. Li et al.
ACTA BIOMATERIALIA (2014)
Build direction dependence of microstructure and high-temperature tensile property of Co-Cr-Mo alloy fabricated by electron beam melting
Shi-Hai Sun et al.
ACTA MATERIALIA (2014)
Processing window and evaporation phenomena for Ti-6Al-4V produced by selective electron beam melting
V. Juechter et al.
ACTA MATERIALIA (2014)
Phononic Band Gaps in Periodic Cellular Materials
Yvonne Liebold-Ribeiro et al.
ADVANCED ENGINEERING MATERIALS (2014)
Melt pool dynamics during selective electron beam melting
T. Scharowsky et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2014)
Periodic open cellular structures with ideal cubic cell geometry: Effect of porosity and cell orientation on pressure drop behavior
M. Klumpp et al.
CHEMICAL ENGINEERING JOURNAL (2014)
Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase gamma-TiAl based alloy
Emanuel Schwaighofer et al.
INTERMETALLICS (2014)
Selective electron beam melting of Ti-48Al-2Nb-2Cr: Microstructure and aluminium loss
Jan Schwerdtfeger et al.
INTERMETALLICS (2014)
Defect generation and propagation mechanism during additive manufacturing by selective beam melting
A. Bauereiss et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting
William J. Sames et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Additive manufacturing of nickel-based superalloy Inconel 718 by selective electron beam melting: Processing window and microstructure
Harald Ernst Helmer et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Modelling of electron beam absorption in complex geometries
Alexander Klassen et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2014)
On three-dimensional dilational elastic metamaterials
Tiemo Bueckmann et al.
NEW JOURNAL OF PHYSICS (2014)
Towards stiffness prediction of cellular structures made by electron beam melting (EBM)
M. Suard et al.
POWDER METALLURGY (2014)
Cellular Ti6Al4V with carbon nanotube-like structures fabricated by selective electron beam melting
Yujie Quan et al.
RAPID PROTOTYPING JOURNAL (2014)
Review on powder-based electron beam additive manufacturing technology
Xibing Gong et al.
MANUFACTURING REVIEW (2014)
Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting
L. E. Murr et al.
ACTA MATERIALIA (2013)
Maintenance of a bone collagen phenotype by osteoblast-like cells in 3D periodic porous titanium (Ti-6Al-4 V) structures fabricated by selective electron beam melting
Nikolas W. Hrabe et al.
CONNECTIVE TISSUE RESEARCH (2013)
Fatigue testing of electron beam-melted Ti-6Al-4V ELI alloy for dental implants
Gaurav V. Joshi et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)
Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti-6Al-4V by selective electron beam melting
A. A. Antonysamy et al.
MATERIALS CHARACTERIZATION (2013)
Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti-6Al-4V) fabricated using electron beam melting (EBM), part 1: Distance from build plate and part size
Nikolas Hrabe et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti-6Al-4V) fabricated using electron beam melting (EBM), Part 2: Energy input, orientation, and location
Nikolas Hrabe et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Production of customized hip stem prostheses - a comparison between conventional machining and electron beam melting (EBM)
Marie Cronskar et al.
RAPID PROTOTYPING JOURNAL (2013)
Fabrication of Metal and Alloy Components by Additive Manufacturing: Examples of 3D Materials Science
Lawrence E. Murr et al.
Journal of Materials Research and Technology-JMR&T (2013)
Microstructures and properties of solid and reticulated mesh components of pure iron fabricated by electron beam melting
Lawrence E. Murr et al.
Journal of Materials Research and Technology-JMR&T (2013)
Microstructures of Niobium Components Fabricated by Electron Beam Melting
Edwin Martinez et al.
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2013)
Process specific catalyst supports-Selective electron beam melted cellular metal structures coated with microporous carbon
Tilman Knorr et al.
CHEMICAL ENGINEERING JOURNAL (2012)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Mechanical characterisation of a periodic auxetic structure produced by SEBM
J. Schwerdtfeger et al.
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2012)
Combination of Extrinsic and Intrinsic Pathways Significantly Accelerates Axial Vascularization of Bioartificial Tissues
Andreas Arkudas et al.
PLASTIC AND RECONSTRUCTIVE SURGERY (2012)
Preliminary fabrication of thin-wall structure of Ti6Al4V for dental restoration by electron beam melting
Wahyudin P. Syam et al.
RAPID PROTOTYPING JOURNAL (2012)
Effect of process parameters settings and thickness on surface roughness of EBM produced Ti-6Al-4V
A. Safdar et al.
RAPID PROTOTYPING JOURNAL (2012)
Metallic additive manufacturing: state-of-the-art review and prospects
Benjamin Vayre et al.
MECHANICS & INDUSTRY (2012)
Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam Melting
Lawrence E. Murr et al.
INTERNATIONAL JOURNAL OF BIOMATERIALS (2012)
Novel precipitate-microstructural architecture developed in the fabrication of solid copper components by additive manufacturing using electron beam melting
D. A. Ramirez et al.
ACTA MATERIALIA (2011)
Finding Auxetic Frameworks in Periodic Tessellations
Holger Mitschke et al.
ADVANCED MATERIALS (2011)
Design of Auxetic Structures via Mathematical Optimization
J. Schwerdtfeger et al.
ADVANCED MATERIALS (2011)
Periodic open-cell foams: Pressure drop measurements and modeling of an ideal tetrakaidecahedra packing
Amer Inayat et al.
CHEMICAL ENGINEERING SCIENCE (2011)
Electron beam melting of Ti-48Al-2Cr-2Nb alloy: Microstructure and mechanical properties investigation
S. Biamino et al.
INTERMETALLICS (2011)
Evaluation of titanium alloy fabricated using electron beam melting system for dental applications
Mari Koike et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Open-cellular copper structures fabricated by additive manufacturing using electron beam melting
D. A. Ramirez et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Defect tolerance of a gamma titanium aluminide alloy
M. Filippini et al.
11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11) (2011)
Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting
L. E. Murr et al.
ACTA MATERIALIA (2010)
Characterization of Ti-6Al-4V open cellular foams fabricated by additive manufacturing using electron beam melting
L. E. Murr et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V
S. S. Al-Bermani et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Comparison of Microstructures and Mechanical Properties for Solid and Mesh Cobalt-Base Alloy Prototypes Fabricated by Electron Beam Melting
S. M. Gaytan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Auxetic cellular structures through selective electron-beam melting
J. Schwerdtfeger et al.
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2010)
Microstructures and mechanical properties of electron beam-rapid manufactured Ti-6Al-4V biomedical prototypes compared to wrought Ti-6Al-4V
L. E. Murr et al.
MATERIALS CHARACTERIZATION (2009)
Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting
Peter Heinl et al.
ACTA BIOMATERIALIA (2008)
Selective Electron Beam Melting of Cellular Titanium: Mechanical Properties
Peter Heinl et al.
ADVANCED ENGINEERING MATERIALS (2008)
Effects of topographical surface modifications of electron beam melted Ti-6Al-4V titanium on human fetal osteoblasts
Sabine Ponader et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)
Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology
Ola L. A. Harrysson et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2008)
Investigations of MX and γ′/γ precipitates in the nickel-based superalloy 718 produced by electron beam melting
A. Strondl et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Electron beam sintering of metal powder
J. Milberg et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2008)
Cellular titanium by selective electron beam melting
Peter Heinl et al.
ADVANCED ENGINEERING MATERIALS (2007)
Efficient cooling with tool inserts manufactured by electron beam melting
L-E. Rannar et al.
RAPID PROTOTYPING JOURNAL (2007)
Direct metal part forming of 316L stainless steel powder by electron beam selective melting
H. B. Qi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
Direct tool steel injection mould inserts through the Arcam EBM free-form fabrication process
GJ Gibbons et al.
ASSEMBLY AUTOMATION (2005)
Characterization of H13 steel produced via electron beam melting
D Cormier et al.
RAPID PROTOTYPING JOURNAL (2004)
Share Paper
