Microstructures and thermal damage mechanisms of sintered polycrystalline diamond compact annealing under ambient air and vacuum conditions

The microstructures and thermal damage mechanisms of sintered polycrystalline diamond compact (PDC) were studied in ambient air and vacuum at the temperature up to 1000 degrees C. The microstructures and compositions of the annealed PDC were characterized by white light interferometer, X-ray diffractometry (XRD), Raman spectroscopy and scanning electron microscopy (SEM). The results showed that no visible change in the morphologies of surface of PCD layers (PDC surfaces) was observed at 200 degrees C both in ambient air and vacuum. After annealing at 500 degrees C, numbers of spalling pits appeared on the PDC surface, and the stress-induced spall mechanism was the dominant thermal damage mechanism in ambient air and vacuum. With the temperature up to 800 degrees C, the annealed PDC surface in ambient air was seriously damaged with a mixed thermal damage mechanism such as graphitization, oxidation and stress-induced micro-cracks. Whereas, the thermal damage mechanism in vacuum was nearly the same as that at 500 degrees C. At 900 degrees C, only a dendritic phase of Co3O4 was contained on the annealed PDC surface due to extensive graphitization and oxidation in ambient air. When it comes to vacuum environment, many cracks were observed on the PDC surface and some fine diamond grains near the cracks spalled, which demonstrated that the thermal damage mechanisms consisted of stress-induced crack and spall mechanisms caused by the different thermal expansion coefficients between the diamond and Co phase. Compared with that at 900 degrees C, the degree of thermal damage reduced at 1000 degrees C in vacuum because of the diffusion of unevenly distributed Co. (C) 2015 Elsevier Ltd. All rights reserved.