☆ 3.8 Article

Developing sustainable Zn-MWCNTs composite coatings using electrochemical co-deposition method: Tribological and surface wetting behavior

ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Facile and Scalable Co-deposition of Anti-bacterial Zn-GNS Nanocomposite Coatings for Hospital Facilities: Tribo-Mechanical and Anti-corrosion Properties

Ayush Owhal et al.

Summary: In this study, graphene nanosheets (GNS) were incorporated into a low-cost Zn coating using electrochemical co-deposition (ECD) to prevent healthcare-associated infections (HCAIs) by serving as a reservoir for bacteria in hospital environments. The effects of different concentrations of GNS in the ECD bath were evaluated for various properties of the coatings, showing improvement in microhardness, anti-bacterial activities, and other features with higher GNS concentration.

JOM (2021)

Add to Collection

Article Electrochemistry

Electro-codeposition and properties of Cu-Ni-MWCNTs composite coatings

Ajay D. Pingale et al.

Summary: In this study, multi-walled carbon nanotubes reinforced Cu-Ni matrix composite coatings were successfully produced by electro-codeposition method. The addition of MWCNTs led to enhanced microhardness and wear resistance of the coatings, with the Cu-Ni-MWCNT (0.15 g L-1) composite coating showing the best performance. Electrical studies also revealed that MWCNTs played a vital role in improving the electrical conductivity of the coatings.

TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING (2021)

Add to Collection

Article Electrochemistry

Electro-codeposited γ-Zn-Ni/Gr composite coatings: Effect of graphene concentrations in the electrolyte bath on tribo-mechanical, anti-corrosion and anti-bacterial properties

Ayush Owhal et al.

Summary: Low-cost and industrially scalable gamma-Zn-Ni/Gr composite coatings were prepared with improved microhardness, wear performance, and corrosion resistance by effectively reducing crystallite size and altering morphology through the addition of Gr. The composite coating prepared with 100 mg L-1 of Gr in the electrolyte bath exhibited the highest microhardness and the lowest coefficient of friction. Anti-bacterial activity tests confirmed the superior anti-bacterial properties of this composite coating against both E. coli and S. aureus.

TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING (2021)

Add to Collection

Article Electrochemistry

Co-deposited Zn-Cu/Gr nanocomposite: Corrosion behaviour and in-vitro cytotoxicity assessment

A. Owhal et al.

Summary: Zn-Cu alloys are potential candidates for bioimplant applications due to their moderate corrosion rate and good mechanical properties. By incorporating graphene nanoplatelets, the properties of Zn-Cu alloy can be enhanced, resulting in improved mechanical strength, reduced wear rates and lower corrosion rate. The synthesized Zn-Cu/Gr nanocomposites demonstrate outstanding tribo-mechanical and anti-corrosion properties, showing promise for bioimplant applications.

TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Current on the Characteristics of CuNi-G Nanocomposite Coatings Developed by DC, PC and PRC Electrodeposition

Ajay D. Pingale et al.

Summary: In this study, CuNi and CuNi-G nanocomposite coatings were prepared on stainless-steel surfaces using different electrodeposition techniques. The results showed that the addition of graphene significantly improved the hardness and wear resistance of the coatings. Pulse current and pulse reverse current electrodeposited CuNi-G nanocomposite coatings exhibited higher microhardness and wear resistance compared to direct current electrodeposited coatings due to smaller crystallite size, higher graphene content, and lower surface roughness.

JOM (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Facile synthesis of graphene by ultrasonic-assisted electrochemical exfoliation of graphite

Ajay D. Pingale et al.

Summary: In this study, graphene powder was successfully synthesized by ultrasonic-assisted electrochemical exfoliation method, and characterized using FTIR, Raman, XRD, and SEM techniques. The results showed that the synthesized graphene powder has various shapes and sizes, suitable for large-scale production.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Preparation of novel Zn/Gr MMC using a modified electro-co-deposition method: Microstructural and tribo-mechanical properties

Ayush Owhal et al.

Summary: This study investigates the method of encapsulating graphene nano-reinforcements in a zinc metal matrix to form high-strength and cost-effective nanocomposite material. Experimental results show that the graphene-reinforced zinc MMC sample exhibits significant enhancements in mechanical and tribological properties.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of Graphene Nanoplatelets Addition on the Mechanical, Tribological and Corrosion Properties of Cu-Ni/Gr Nanocomposite Coatings by Electro-co-deposition Method

Ajay D. Pingale et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2020)

Add to Collection

Article Chemistry, Physical

Dispersion of multiwalled carbon nanotubes into a diglyme solution, electrodeposition of aluminum-based composite, and improvement of hardness

Zelei Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

A short review on mechanical properties of graphene reinforced metal matrix composites

Omer Guler et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of zinc matrix composites reinforced with copper coated multiwall carbon nanotubes

Hongmei Ao et al.

MATERIALS RESEARCH EXPRESS (2020)

Add to Collection

Article Materials Science, Ceramics

Mechanical, biocorrosion, and antibacterial properties of nanocrystalline TiN coating for orthopedic applications

M. A. Hussein et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Obtaining and Corrosion Performance of Composite Zinc Coatings with Incorporated Carbon Spheres

Nelly Boshkova et al.

COATINGS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

High-quality graphene directly grown on Cu nanoparticles for Cu-graphene nanocomposites

Shuangyue Wang et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Electrochemistry

Biocorrosion Control of Electroless Ni-Zn-P Coating Based on Carbon Steel by the Pseudomonas aeruginosa Biofilm

Sahar A. Fadl-allah et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Improving tribological properties of (Zn-Ni)/nano Al2O3 composite coatings produced by ultrasonic assisted pulse plating

Sayed Alireza Ataie et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Super-hydrophobic multi-walled carbon nanotube coatings for stainless steel

Francesco De Nicola et al.

NANOTECHNOLOGY (2015)

Add to Collection

Article Materials Science, Coatings & Films

Pulse electrocodeposition of Ni/MWCNT nanocomposite coatings

M. Kartal et al.

SURFACE ENGINEERING (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Stability of Zn-Ni-TiO2 and Zn-TiO2 nanocomposite coatings in near-neutral sulphate solutions

A. Gomes et al.

JOURNAL OF NANOPARTICLE RESEARCH (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Co-deposited Zn-submicron sized Al2O3 composite coatings: Production, characterization and micromechanical properties

O. Sancakoglu et al.

MATERIALS & DESIGN (2011)

Add to Collection

Article Physics, Multidisciplinary

The fabrication, characterization and electrochemical corrosion behavior of Zn-TiO2 composite coatings

M. K. Punith Kumar et al.

PHYSICA SCRIPTA (2011)

Add to Collection

Article Electrochemistry

Cu-MWCNT Composite Films Fabricated by Electrodeposition

Susumu Arai et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)

Add to Collection

Article Materials Science, Coatings & Films

Independent control of HVOF particle velocity and temperature

TC Hanson et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.