Related references
Note: Only part of the references are listed.Experimental investigation and process simulation of biolubricant production from waste cooking oil
Reda Z. K. Hussein et al.
BIOMASS & BIOENERGY (2021)
Synthesis and characterization of coal fly ash supported zinc oxide catalyst for biodiesel production using used cooking oil as feed
Adeyinka S. Yusuff et al.
RENEWABLE ENERGY (2021)
A comprehensive study on prospects of economy, environment, and efficiency of palm oil biodiesel as a renewable fuel
S. Dey et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Engine performance and emission characteristics of palm biodiesel blends with graphene oxide nanoplatelets and dimethyl carbonate additives
L. Razzaq et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)
A Review: Role of Fatty Acids Composition in Characterizing Potential Feedstock for Sustainable Green Lubricants by Advance Transesterification Process and its Global as Well as Pakistani Prospective
M. Gul et al.
BIOENERGY RESEARCH (2020)
Experimental investigation to identify the type of waste plastic pyrolysis oil suitable for conversion to diesel engine fuel
V. L. Mangesh et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Waste plastic to pyrolytic oil and its utilization in CI engine: Performance analysis and combustion characteristics
R. K. Singh et al.
FUEL (2020)
Comparative assessment of engine performance and emissions fueled with three different biodiesel generations
Sara Tayari et al.
RENEWABLE ENERGY (2020)
Evaluation of Waste Plastic Oil-Biodiesel Blends as Alternative Fuels for Diesel Engines
Chalita Kaewbuddee et al.
ENERGIES (2020)
Effect of Additivized Biodiesel Blends on Diesel Engine Performance, Emission, Tribological Characteristics, and Lubricant Tribology
M. A. Mujtaba et al.
ENERGIES (2020)
Effect of Fatty Acid Methyl Ester on Fuel-Injector Wear Characteristics
M. Jamshaid et al.
JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (2020)
State of the Art of Catalysts for Biodiesel Production
I. M. Rizwanul Fattah et al.
FRONTIERS IN ENERGY RESEARCH (2020)
The Challenges of a Biodiesel Implementation Program in Malaysia
Zulqarnain et al.
PROCESSES (2020)
Green preparation of branched biolubricant by chemically modifying waste cooking oil with lipase and ionic liquid
Wei Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Energy, exergy and emission analysis on a DI single cylinder diesel engine using pyrolytic waste plastic oil diesel blend
Amar Kumar Das et al.
JOURNAL OF THE ENERGY INSTITUTE (2020)
Comparative study of nanoparticles and alcoholic fuel additives-biodiesel-diesel blend for performance and emission improvements
M. A. Mujtaba et al.
FUEL (2020)
Plastic Solid Waste (PSW) in the Context of Life Cycle Assessment (LCA) and Sustainable Management
Ana Antelava et al.
ENVIRONMENTAL MANAGEMENT (2019)
Influence of Hydrocarbon Base Oil Molecular Structure on Lubricating Properties in Nano-scale Thin Film
Weiwei Wang et al.
TRIBOLOGY LETTERS (2019)
A core-shell SO4/Mg-Al-Fe3O4 catalyst for biodiesel production
Jabbar Gardy et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2019)
Engine parameter optimization of palm oil biodiesel as alternate fuel in CI engine
Akula Naresh Kumar et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)
The potential of dimethyl carbonate (DMC) as an alternative fuel for compression ignition engines with different EGR rates
Mingzhang Pan et al.
FUEL (2019)
Evaluation of diesel engine performance with high blended diesel-biodiesel fuel from waste cooking oil
Obed M. Ali
2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE ENGINEERING TECHNIQUES (ICSET 2019) (2019)
Experimental characterisation of a diesel engine running on polypropylene oils produced at different pyrolysis temperatures
Ioannis Kalargaris et al.
FUEL (2018)
Diesel engine combustion characteristics using nano-particles in biodiesel-diesel blends
G. Najafi
FUEL (2018)
Effect of additives on performance, combustion and emission behavior of preheated palm oil/diesel blends in DI diesel engine
S. Senthur Prabu et al.
RENEWABLE ENERGY (2018)
Effect of Base Oil Structure on Elastohydrodynamic Friction
Jie Zhang et al.
TRIBOLOGY LETTERS (2017)
Effect of added alumina as nano-catalyst to diesel-biodiesel blends on performance and emission characteristics of CI engine
Seyyed Hassan Hosseini et al.
ENERGY (2017)
Extraction and characterization of waste plastic oil (WPO) with the effect of n-butanol addition on the performance and emissions of a DI diesel engine fueled with WPO/diesel blends
D. Damodharan et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Analyzing and evaluation of carbon nanotubes additives to diesohol-B2 fuels on performance and emission of diesel engines
Khadijeh Heydari-Maleney et al.
FUEL (2017)
Combustion, performance and emission analysis of a DI diesel engine using plastic pyrolysis oil
Ioannis Kalargaris et al.
FUEL PROCESSING TECHNOLOGY (2017)
Impacts of additives on performance and emission characteristics of diesel engines during steady state operation
Esmail Khalife et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2017)
Potential of pyrolysis processes in the waste management sector
D. Czajczynska et al.
THERMAL SCIENCE AND ENGINEERING PROGRESS (2017)
K2CO3-loaded hydrotalcite: A promising heterogeneous solid base catalyst for biolubricant base oil production from waste cooking oils
Guo Sun et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2017)
Performance and emission characteristics of a CI engine fuelled with carbon nanotubes and diesel-biodiesel blends
Seyyed Hassan Hosseini et al.
RENEWABLE ENERGY (2017)
Optimization of performance, emission, friction and wear characteristics of palm and Calophyllum inophyllum biodiesel blends
M. H. Mosarof et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Assessment of friction and wear characteristics of Calophyllum inophyllum and palm biodiesel
M. H. Mosarof et al.
INDUSTRIAL CROPS AND PRODUCTS (2016)
Biodiesel production from waste cooking oil for use as fuel in artisanal fishing boats: Integrating environmental, economic and social aspects
Elisa Helena Siegel Moecke et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Impact of fatty acid composition and physicochemical properties of Jatropha and Alexandrian laurel biodiesel blends: An analysis of performance and emission characteristics
Md. Amin Ruhul et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Analysis of blended fuel properties and engine performance with palm biodiesel-diesel blended fuel
Obed M. Ali et al.
RENEWABLE ENERGY (2016)
Influence of temperature and reaction time on the conversion of polystyrene waste to pyrolysis liquid oil
R. Miandad et al.
WASTE MANAGEMENT (2016)
Pyrolytic Waste Plastic Oil and Its Diesel Blend: Fuel Characterization
M. Z. H. Khan et al.
JOURNAL OF ENVIRONMENTAL AND PUBLIC HEALTH (2016)
A detailed study of combustion characteristics of a DI diesel engine using waste plastic oil and its blends
Viswanath K. Kaimal et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Friction and wear characteristics of Calophyllum inophyllum biodiesel
M. Habibullah et al.
INDUSTRIAL CROPS AND PRODUCTS (2015)
Tribological Characteristics of Calophyllum inophyllum-Based TMP (Trimethylolpropane) Ester as Energy-Saving and Biodegradable Lubricant
M. Habibullah et al.
TRIBOLOGY TRANSACTIONS (2015)
Households willingness to accept collection and recycling of waste cooking oil for biodiesel input in Petaling District, Selangor, Malaysia
Mohd Rusli Yacob et al.
ENVIRONMENTAL FORENSICS 2015 (2015)
Impact of biodiesel blend on injector deposit formation
A. M. Liaquat et al.
ENERGY (2014)
Biodiesel production and performance evaluation of coconut, palm and their combined blend with diesel in a single-cylinder diesel engine
M. Habibullah et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Experimental investigations of effect of Karanja biodiesel on tribological properties of lubricating oil in a compression ignition engine
Atul Dhar et al.
FUEL (2014)
Performance, combustion and emission characteristics of biodiesel derived from waste cooking oils
H. An et al.
APPLIED ENERGY (2013)
Experimental and modeling study of the auto-ignition of n-heptane/n-butanol mixtures
Jiaxiang Zhang et al.
COMBUSTION AND FLAME (2013)
Performance and emission analysis of blends of waste plastic oil obtained by catalytic pyrolysis of waste HDPE with diesel in a CI engine
Sachin Kumar et al.
ENERGY CONVERSION AND MANAGEMENT (2013)
Fueling a stationary direct injection diesel engine with diesel-used palm oil-butanol blends - An experimental study
H. Sharon et al.
ENERGY CONVERSION AND MANAGEMENT (2013)
Investigation of friction and wear characteristics of palm biodiesel
M. A. Fazal et al.
ENERGY CONVERSION AND MANAGEMENT (2013)
Effects of ethanol-diesel blends to performance of a DI diesel engine for different injection timings
Ahmet Murcak et al.
FUEL (2013)
The effect of biodiesel fatty acid composition on combustion and diesel engine exhaust emissions
Sara Pinzi et al.
FUEL (2013)
A study on the performance and emission of a diesel engine fueled with Jatropha biodiesel oil and its blends
Bhupendra Singh Chauhan et al.
ENERGY (2012)
Application of blend fuels in a diesel engine
A. M. Liaquat et al.
2011 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY ENGINEERING (ICAEE) (2012)
Combustion characteristics and engine emissions of a diesel engine fueled with diesel and treated waste cooking oil blends
A. Abu-Jrai et al.
CHEMICAL ENGINEERING JOURNAL (2011)
Emission and performance characteristics of an indirect ignition diesel engine fuelled with waste cooking oil
M. A. Kalam et al.
ENERGY (2011)
Effect of biodiesel unsaturated fatty acid on combustion characteristics of a DI compression ignition engine
Sukumar Puhan et al.
BIOMASS & BIOENERGY (2010)
Homogeneous, heterogeneous and enzymatic catalysis for transesterification of high free fatty acid oil (waste cooking oil) to biodiesel: A review
Man Kee Lam et al.
BIOTECHNOLOGY ADVANCES (2010)
Effect of temperature on tribological properties of palm biodiesel
A. S. M. A. Haseeb et al.
ENERGY (2010)
Lubricity of Ethanol-Biodiesel-Diesel Fuel Blends
Magin Lapuerta et al.
ENERGY & FUELS (2010)
Thermal and catalytic pyrolysis of polyethylene over HZSM5 and HUSY zeolites in a batch reactor under dynamic conditions
A. Marcilla et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2009)
Performance, emission and combustion characteristics of a DI diesel engine using waste plastic oil
M. Mani et al.
APPLIED THERMAL ENGINEERING (2009)
Biodiesel influence on tribology characteristics of a diesel engine
Stanislav Pehan et al.
FUEL (2009)
Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time
Jude A. Onwudili et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2009)
Transesterification of canola oil in mixed methanol/ethanol system and use of esters as lubricity additive
Mangesh G. Kulkarni et al.
BIORESOURCE TECHNOLOGY (2007)
HFRR studies on methyl esters of nonedible vegetable oils
A. K. Bhatnagar et al.
ENERGY & FUELS (2006)
Dependence of biodiesel fuel properties on the structure of fatty acid alkyl esters
G Knothe
FUEL PROCESSING TECHNOLOGY (2005)
Alternative and low sulfur fuel options: boundary lubrication performance and potential problems
KS Wain et al.
TRIBOLOGY INTERNATIONAL (2005)
Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons
A Demirbas
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2004)
Catalytic pyrolysis of polyethylene
R Bagri et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2002)
Share Paper
