Related references
Note: Only part of the references are listed.Fabrication of extremely conductive high-aspect silver traces buried in hot-embossed polycarbonate films via the direct gravure doctoring method
Yasuyuki Kusaka et al.
ADVANCED POWDER TECHNOLOGY (2021)
Self-Aligned Capillarity-Assisted Printing of High Aspect Ratio Flexible Metal Conductors: Optimizing Ink Flow, Plating, and Mechanical Adhesion
Krystopher S. Jochem et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)
Inkjet-printed, self-aligned organic Schottky diodes on imprinted plastic substrates
Motao Cao et al.
FLEXIBLE AND PRINTED ELECTRONICS (2020)
Flexible, Print-in-Place 1D-2D Thin-Film Transistors Using Aerosol Jet Printing
Shiheng Lu et al.
ACS NANO (2019)
Roll-To-Roll Screen-Printed Silver Conductors on a Polydimethyl Siloxane Substrate for Stretchable Electronics
Olli-Heikki Huttunen et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
Printed, 1 V electrolyte-gated transistors based on poly(3-hexylthiophene) operating at >10 kHz on plastic
Fazel Zare Bidoky et al.
APPLIED PHYSICS LETTERS (2018)
High-Resolution, High-Aspect-Ratio Printed and Plated Metal Conductors Utilizing Roll-to-Roll Microscale UV Imprinting with Prototype Imprinting Stamps
Krystopher S. Jochem et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
Fully printed all-polymer tattoo/textile electronics for electromyography
Eloise Bihar et al.
FLEXIBLE AND PRINTED ELECTRONICS (2018)
Self-aligned capillarity-assisted printing of top-gate thin-film transistors on plastic
Woo Jin Hyun et al.
FLEXIBLE AND PRINTED ELECTRONICS (2018)
Self-aligned inkjet printing of resistors and low-pass resistor-capacitor filters on roll-to-roll imprinted plastics with resistances ranging from 10 to 10(6)Omega
Motao Cao et al.
FLEXIBLE AND PRINTED ELECTRONICS (2018)
Scalable, Self-Aligned Printing of Flexible Graphene Micro-Supercapacitors
Woo Jin Hyun et al.
ADVANCED ENERGY MATERIALS (2017)
Embedded Ag/Ni Metal-Mesh with Low Surface Roughness As Transparent Conductive Electrode for Optoelectronic Applications
Xiaolian Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Fabrication of conductive copper patterns using reactive inkjet printing followed by two-step electroless plating
Jin-Ju Chen et al.
APPLIED SURFACE SCIENCE (2017)
Printed, Self-Aligned Side-Gate Organic Transistors with a Sub-5 μm Gate-Channel Distance on Imprinted Plastic Substrates
Woo Jin Hyun et al.
ADVANCED ELECTRONIC MATERIALS (2016)
High-Resolution, High-Aspect Ratio Conductive Wires Embedded in Plastic Substrates
Ankit Mahajan et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Screen Printing of Highly Loaded Silver Inks on Plastic Substrates Using Silicon Stencils
Woo Jin Hyun et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Large-Area Compliant Tactile Sensors Using Printed Carbon Nanotube Active-Matrix Backplanes
Chiseon Yeom et al.
ADVANCED MATERIALS (2015)
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Saleem Khan et al.
IEEE SENSORS JOURNAL (2015)
A Self-Aligned Strategy for Printed Electronics: Exploiting Capillary Flow on Microstructured Plastic Surfaces
Ankit Mahajan et al.
ADVANCED ELECTRONIC MATERIALS (2015)
Electroless Copper Plating of Inkjet-Printed Polydopamine Nanoparticles: a Facile Method to Fabricate Highly Conductive Patterns at Near Room Temperature
Siyuan Ma et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Wearable, Human-Interactive, Health-Monitoring, Wireless Devices Fabricated by Macroscale Printing Techniques
Wataru Honda et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Optimization of Aerosol Jet Printing for High-Resolution, High-Aspect Ratio Silver Lines
Ankit Mahajan et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
A flexible high potential printed battery for powering printed electronics
Abhinav M. Gaikwad et al.
APPLIED PHYSICS LETTERS (2013)
Highly efficient indium tin oxide-free organic photovoltaics using inkjet-printed silver nanoparticle current collecting grids
M. Neophytou et al.
APPLIED PHYSICS LETTERS (2012)
Reactive Silver Inks for Patterning High-Conductivity Features at Mild Temperatures
S. Brett Walker et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
All additive inkjet printed humidity sensors on plastic substrate
F. Molina-Lopez et al.
SENSORS AND ACTUATORS B-CHEMICAL (2012)
Printed Paper Photovoltaic Cells
Arved Huebler et al.
ADVANCED ENERGY MATERIALS (2011)
Printed Assemblies of Inorganic Light-Emitting Diodes for Deformable and Semitransparent Displays
Sang-Il Park et al.
SCIENCE (2009)
Progress toward development of all-printed RFID tags:: Materials, processes, and devices
V Subramanian et al.
PROCEEDINGS OF THE IEEE (2005)
Fully printed integrated circuits from solution processable polymers
A Knobloch et al.
JOURNAL OF APPLIED PHYSICS (2004)
Ink jet processing of metallic nanoparticle suspensions for electronic circuitry fabrication
JB Szczech et al.
MICROSCALE THERMOPHYSICAL ENGINEERING (2004)
Share Paper
