Investigating the effect of PEG200 and two-dimensional h-BN on PVDF membrane performance for membrane distillation-crystallization

Although water supplies are prominently dependent on desalination technology, desalination plant facing severe issues of discharged brine concentrate. Membrane distillation crystallization is an emerging synergistic technology that resolves the issue of brine concentrate by recovering clean water and value-added minerals simultaneously. In the present study, properties of polyvinylidene fluoride (PVDF) membrane were modified by incorporation of exfoliated fillers of hexagonal boron nitride and polyethylene glycol. The changes in morphology, surface roughness, hydrophobicity, thermal stability, and chemical composition of the prepared membranes were evaluated by scanning electron microscopy, atomic force microscopy, contact angle, thermogravimetric analysis, Fourier-transform infrared spectroscopy, respectively. Membrane distillation crystallization experiments were conducted to observe the effect of modified membranes on the permeate flux and salts recovery at different feed temperatures. The results showed a significant improvement in the permeate flux with modified membranes compared with pure PVDF membrane. It was found that hexagonal boron nitride/polyethylene glycol200 incorporated PVDF membrane gave the higher permeate flux (3.41 kg/m(2) h for K2SO4 and 2.62 kg/m(2) h for KNO3) at a temperature of 80 degrees C along with higher salts recovery than pure PVDF membranes. A 100 h long run test was conducted on modified membranes, which showed consistency in permeate flux with a marginal increase in conductivity. (C) 2021 Elsevier Ltd. All rights reserved.

Automated summary

By modifying the properties of PVDF membranes, this study addressed the issue of brine concentrate in desalination plants using membrane distillation crystallization technology. Experimental results demonstrated significant improvements in permeate flux and salts recovery with the modified membranes.