4.5 Article

On the Potential of Gallium- and Indium-Based Liquid Metal Membranes for Hydrogen Separation

Related references

Note: Only part of the references are listed.
Review Chemistry, Physical

Advances in hydrogen selective membranes based on palladium ternary alloys

M. Laura Bosko et al.

Summary: This review provides an in-depth analysis of Pd-based ternary alloy membranes for hydrogen separation, focusing on PdAgAu, PdCuAg, and PdCuAu systems. These alloys show improved hydrogen permeability and chemical resistance, with correlations between permeation properties and lattice parameters. Surface segregation behavior is also analyzed in these ternary alloys, even after exposure to CO, CO2, and H2S, indicating the need for further research on developing membranes with improved long-term stability.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Review Energy & Fuels

Palladium-Alloy Membrane Reactors for Fuel Reforming and Hydrogen Production: A Review

Mohamed A. Habib et al.

Summary: Hydrogen has the potential to be a clean energy carrier with better combustion characteristics and higher energy efficiency when used with fuel cells. Inorganic palladium (Pd) membranes show great potential for separating hydrogen due to their stability and high selectivity. Various methods of fabricating Pd-alloy membranes are discussed in terms of stability and selectivity, with a focus on Pd-Ag, Pd-Cu, Pd-Au, and Pd-Ru alloys.

ENERGY & FUELS (2021)

Article Biochemistry & Molecular Biology

Assessment of Sieverts Law Assumptions and 'n' Values in Palladium Membranes: Experimental and Theoretical Analyses

Abdulrahman Alraeesi et al.

Summary: Palladium and palladium alloy membranes are commonly used for hydrogen purification, removal, or reaction processes, with Sieverts' Law being applied to analyze hydrogen permeation through the membranes. However, under certain conditions, such as low feed concentrations, concentration polarization may dominate hydrogen transport, leading to deviation from Sieverts' Law. Adsorption effects at high pressure and low temperature can result in pressure exponent values less than 0.5.

MEMBRANES (2021)

Article Chemistry, Physical

Theoretical investigations of permeability and selectivity of Pd-Cu and Pd-Ni membranes for hydrogen separation

Zhengzhao Han et al.

Summary: This study theoretically explored the hydrogen separation performance of Pd-Cu and Pd-Ni alloy membranes, which exhibit superior selectivity to H-2 over N-2, CO, CO2, CH4, and H2S at varied temperatures, surpassing industrial production limits. Experimental conclusions are consistent with density functional theory calculations, further supported by molecular dynamics simulations.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Engineering, Chemical

Dissociative Adsorption, Dissolution, and Diffusion of Hydrogen in Liquid Metal Membranes. A Phenomenological Model

Pei-Shan Yen et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

Article Chemistry, Physical

Evaluation of hydrogen sorption and permeation parameters in liquid metal membranes via Sieverts' apparatus

Nicholas D. Deveau et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Review Biochemistry & Molecular Biology

Thermodynamic Aspects in Non-Ideal Metal Membranes for Hydrogen Purification

Stefano Bellini et al.

MEMBRANES (2018)

Article Chemistry, Physical

Diffusion, Permeation and Solubility of Hydrogen in Copper

Hans Magnusson et al.

JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2017)

Article Metallurgy & Metallurgical Engineering

Self-Diffusion Coefficients of Cadmium and Indium in Liquid

A. S. Fefelov et al.

RUSSIAN METALLURGY (2017)

Article Engineering, Chemical

Sandwiched Liquid Metal Membrane (SLiMM) for Hydrogen Purification

Pei-Shan Yen et al.

AICHE JOURNAL (2017)

Article Multidisciplinary Sciences

High pressure-induced distortion in face-centered cubic phase of thallium

Komsilp Kotmool et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

Review Green & Sustainable Science & Technology

Hydrogen selective membranes: A review of palladium-based dense metal membranes

N. A. Al-Mufachi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Article Physics, Applied

Ab initio based understanding of diffusion mechanisms of hydrogen in liquid aluminum

N. Jakse et al.

APPLIED PHYSICS LETTERS (2014)

Proceedings Paper Computer Science, Theory & Methods

Implementation of an Adaptive BDF2 Formula and Comparison with the MATLAB Ode15s

E. Alberdi Celaya et al.

2014 INTERNATIONAL CONFERENCE ON COMPUTATIONAL SCIENCE (2014)

Review Engineering, Chemical

Recent advances on membranes and membrane reactors for hydrogen production

Fausto Gallucci et al.

CHEMICAL ENGINEERING SCIENCE (2013)

Article Engineering, Chemical

Beyond Sieverts' law: A comprehensive microkinetic model of hydrogen permeation in dense metal membranes

Nicholas D. Deveau et al.

JOURNAL OF MEMBRANE SCIENCE (2013)

Article Chemistry, Physical

Standard States for Adsorption on Solid Surfaces: 2D Gases, Surface Liquids, and Langmuir Adsorbates

Aditya Savara

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

Article Green & Sustainable Science & Technology

Modelling and systematic experimental investigation of mass transfer in supported palladium-based membrane separators

Jurriaan Boon et al.

INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2012)

Article Chemistry, Multidisciplinary

The Entropies of Adsorbed Molecules

Charles T. Campbell et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

Article Chemistry, Applied

Catalyst design based on microkinetic models: Oxidative coupling of methane

Joris W. Thybaut et al.

CATALYSIS TODAY (2011)

Article Engineering, Chemical

Hydrogen selective thin palladium-copper composite membranes on alumina supports

Hankwon Lim et al.

JOURNAL OF MEMBRANE SCIENCE (2011)

Article Materials Science, Multidisciplinary

The role of palladium in a hydrogen economy

Brian D. Adams et al.

MATERIALS TODAY (2011)

Article Materials Science, Multidisciplinary

Corrosion development between liquid gallium and four typical metal substrates used in chip cooling device

Yue-Guang Deng et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2009)

Article Chemistry, Inorganic & Nuclear

Covalent radii revisited

Beatriz Cordero et al.

DALTON TRANSACTIONS (2008)

Review Engineering, Chemical

Developments and design of novel (non-palladium-based) metal membranes for hydrogen separation

John W. Phair et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2006)

Article Electrochemistry

Dissociative adsorption of water molecules on uncharged surfaces of Indium(111) and gallium

RR Nazmutdinov et al.

RUSSIAN JOURNAL OF ELECTROCHEMISTRY (2004)

Article Engineering, Chemical

Hydrogen permeance of palladium-copper alloy membranes over a wide range of temperatures and pressures

BH Howard et al.

JOURNAL OF MEMBRANE SCIENCE (2004)

Article Materials Science, Multidisciplinary

Correlation of viscosity and structural changes of indium melt

SJ Cheng et al.

MATERIALS LETTERS (2003)

Article Engineering, Chemical

The permeability of hydrogen in bulk palladium at elevated temperatures and pressures

BD Morreale et al.

JOURNAL OF MEMBRANE SCIENCE (2003)

Article Materials Science, Multidisciplinary

Reaction diffusion and formation of Cu11In9 and In27Ni10 phases in the couple of indium-substrates

DG Kim et al.

MATERIALS TRANSACTIONS (2003)