Related references
Note: Only part of the references are listed.Multivariable control of ball-milled reactive material composition and structure
Matteo Aureli et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Structure, thermal stability and magnetic properties of mechanically alloyed (Fe-Al)-30vol%B powders
Marek Krasnowski et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Synthesis of nanocrystalline equiatomic nickel-cobalt-iron alloy powders by mechanical alloying and their structural and magnetic characterization
Anuj Rathi et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2019)
Effect of High-Energy Ball Milling on Structure and Properties of Some Intermetallic Alloys: A Mini Review
Fatma Hadef
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2019)
Structural and Magnetic Properties of Ordered/Disordered Sendust Powders Prepared by Mechanical Alloying
M. Amoohadi et al.
JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM (2018)
X-ray diffraction, Mossbauer spectrometry and thermal studies of the mechanically alloyed (Fe1-xMnx)2P powders
S. Alleg et al.
ADVANCED POWDER TECHNOLOGY (2018)
Structural and magnetic behavior of Fe(Nb,Zr) rich alloys produced by mechanical alloying
A. Carrillo et al.
AIP ADVANCES (2018)
Thermostructural observation and adaptive control of fractal structure in ball-milled materials
Matteo Aureli et al.
MATERIALS & DESIGN (2018)
The effects of mechanical milling on the structural, mechanical, and electromagnetic properties of Cu-8 wt% NdFeB composite alloys
Marta Lopez et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
Ordering kinetics evaluation of FeAl powders
N. Cinca et al.
INTERMETALLICS (2017)
Phase transformations during mechanical alloying and subsequent heating of Fe-Al-B powders
Marek Krasnowski
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Structural, elastic and electronic properties of B2-type modified by ternary additions FeAl-based intermetallics: First-principles study
Yibing Zheng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Reordering a deformation disordered intermetallic compound by antiphase boundary movement
C. Gammer et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Non-equilibrium microscale thermomechanical modeling of bimetallic particulate fractal structures during ball milling fabrication
Matteo Aureli et al.
JOURNAL OF APPLIED PHYSICS (2017)
Nanocrystallization of Al Powder by Cryomilling Process
Mohammad Hossein Enayati
KONA POWDER AND PARTICLE JOURNAL (2017)
Microstructural and mechanical characterization of copper, nickel, and Cu-based alloys obtained by mechanical alloying and hot pressing
C. Martinez et al.
MATERIALS LETTERS (2017)
Synthesis and disordering of B2 TM-Al (TM = Fe, Ni, Co) intermetallic alloys by high energy ball milling: A review
Fatma Hadef
POWDER TECHNOLOGY (2017)
Atomic-level heterogeneity and defect dynamics in concentrated solid-solution alloys
Yanwen Zhang et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)
INVESTIGATION OF THE MICROSTRUCTURE AND THERMOELECTRIC PROPERTIES OF P-TYPE BiSbTe ALLOYS BY USAGE OF DIFFERENT REVOLUTIONS PER MINUTE (RPM) DURING MECHANICAL MILLING
S. -M. Yoon et al.
ARCHIVES OF METALLURGY AND MATERIALS (2017)
Structural Evolution during Milling, Annealing, and Rapid Consolidation of Nanocrystalline Fe-10Cr-3Al Powder
Rajiv Kumar et al.
MATERIALS (2017)
Mossbauer and X-ray studies of mechanically alloyed Fe60Ni30Cr10 prepared by high energy ball milling
M. Slimi et al.
ADVANCED POWDER TECHNOLOGY (2016)
Morphology- and lattice stability-dependent performance of nanostructured Li4Ti5O12 probed by in situ high-pressure Raman spectroscopy and synchrotron X-ray diffraction
Fengping Xiao et al.
CRYSTENGCOMM (2016)
Morphology and structure effect of Ti additive on the solid-state reaction between Ni and Al powders during mechanical alloying
Amal Cherif et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Solid-state reactions during mechanical alloying of ternary Fe-Al-X (X=Ni, Mn, Cu, Ti, Cr, B, Si) systems: A review
Fatma Hadef
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2016)
Synthesis and Characterization of Nanocrystalline Al-20 at. % Cu Powders Produced by Mechanical Alloying
Molka Ben Makhlouf et al.
METALS (2016)
Phase transformations and microstructural properties of nanocrystalline Fe75Si10B10Nb5 alloy synthesized by mechanical alloying
R. Lachheb et al.
ADVANCED POWDER TECHNOLOGY (2015)
Role of atomic migration in nanocrystalline stability: Grain size and thin film stress states
Monica Kapoor et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2015)
Effects of chemical ordering and composition on the magnetic properties of disordered FeAl alloys
Tanmoy Ghosh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Magnetic and structural properties of nanostructured Fe-20Al-2Cr powder mixtures
N. Zerniz et al.
MATERIALS CHARACTERIZATION (2015)
Structural and Phase Transformations in Fe-Al Intermetallic Powders During Mechanochemical Sintering
A. L. Borisova et al.
POWDER METALLURGY AND METAL CERAMICS (2015)
Experimental investigation of milling regimes in planetary ball mill and their influence on structure and reactivity of gasless powder exothermic mixtures
A. S. Rogachev et al.
POWDER TECHNOLOGY (2015)
Effects of Alloy Composition on Microstructure and Mechanical Properties of Iron-Based Materials Fabricated by Ball Milling and Spark Plasma Sintering
Yongquan Ye et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Nanoscale segregation behavior and high-temperature stability of nanocrystalline W-20 at.% Ti
Tongjai Chookajorn et al.
ACTA MATERIALIA (2014)
Anomalous grain refinement trends during mechanical milling of Bi2Te3
S. A. Humphry-Baker et al.
ACTA MATERIALIA (2014)
Application of mechanical alloying/milling for synthesis of nanocrystalline and amorphous materials
M. H. Enayati et al.
INTERNATIONAL MATERIALS REVIEWS (2014)
Evolution of crystallite size, lattice parameter and internal strain in Al precipitates during high energy ball milling of partly amorphous Al87Ni8La5 alloy
M. Dittrich et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Structural and microstructural properties of nanocrystalline Cu-Fe-Ni powders produced by mechanical alloying
M. Slimi et al.
POWDER TECHNOLOGY (2014)
Spark ignitable ball milled powders of Al and Ni at NiAl composition
A. Hadjiafxenti et al.
VACUUM (2014)
A system dynamics model to estimate energy, temperature, and particle size in planetary ball milling
A. Yazdani et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Accelerated precipitation due to mechanical milling of two-phase B2/L21 Fe30Ni20Mn20Al30
X. Wu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Investigation of mechanosynthesized Fe50Ni40Al10 powders
F. Hadef et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2013)
Hyperfine interactions and structural features of Fe-44Co-6Mo (wt.%) nanostructured powders
Hayet Moumeni et al.
MATERIALS CHEMISTRY AND PHYSICS (2013)
Comparative study using MS and XRD of Fe80Al20 alloy produced by mechanical alloying
F. Hadef et al.
SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY (2013)
Abrasive wear response of nanocrystalline Ni-W alloys across the Hall-Petch breakdown
Timothy J. Rupert et al.
WEAR (2013)
XRD Characterization of Microstructural Evolution During Mechanical Alloying of W-20 wt%Mo
Ajeet K. Srivastav et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2013)
Thermodynamic analysis of (Ni, Fe)3Al formation by mechanical alloying
Z. Adabavazeh et al.
JOURNAL OF CHEMICAL THERMODYNAMICS (2012)
Strain Energy During Mechanical Milling: Part I. Mathematical Modeling
Yaojun Lin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Thermodynamic and physical properties of FeAl and Fe3Al: an atomistic study by EAM simulation
Yifang Ouyang et al.
PHYSICA B-CONDENSED MATTER (2012)
Mossbauer effect study of fine atomic structure of Fe50Al40Ni10 powders
F. Hadef et al.
SUPERLATTICES AND MICROSTRUCTURES (2012)
Atomistic mechanism of cyclic phase transitions in Nd-Fe-B based intermetallics
S. Shukla et al.
INTERMETALLICS (2011)
Structural and microstructural study of nanostructured Fe50Al40Ni10 powders produced by mechanical alloying
F. Hadef et al.
MATERIALS CHARACTERIZATION (2011)
Nanocrystalline FeAl intermetallics obtained in mechanically alloyed Fe50Al40Ni10 powder
F. Hadef et al.
SUPERLATTICES AND MICROSTRUCTURES (2011)
Synthesis of reactive Al/Ni structures by ball milling
Anastasia Hadjiafxenti et al.
INTERMETALLICS (2010)
Atomistic origin of lattice strain on stiffness of nanoparticles
G. Ouyang et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2010)
Phase transformation, structural evolution, and mechanical property of nanostructured feal as a result of mechanical alloying
M. M. Rajath Hegde et al.
POWDER METALLURGY AND METAL CERAMICS (2010)
Point defect structure in B2-ordered Fe-Al alloys
A. Hanc et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Structure and magnetic properties of nanocrystalline Fe75Si25 powders prepared by mechanical alloying
M. P. C. Kalita et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2008)
Atomistic study of magnetism effect on structural stability in Fe3Al and Fe3AlX (X = H, B, C, N, O) alloys
A. Kellou et al.
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2008)
Processing of nanocrystalline FeAIX(X = Ni, Mn) intermetallics using a mechanical alloying and hot pressing techniques
W Maziarz et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Phase stability of bcc Zr in Nb/Zr thin film multilayers
GB Thompson et al.
ACTA MATERIALIA (2003)
High-energy ball milling of NiAl(Fe) system
G Principi et al.
HYPERFINE INTERACTIONS (2002)
Share Paper
