Experimental investigation and prediction model for UCS loss of unsaturated sandstones under freeze-thaw action

Sandstone is widely distributed in cold regions and the freeze-thaw deterioration of them has caused many geological engineering disasters. As an important and direct index of frost resistance, the strength loss of sandstones under freeze-thaw actions should be investigated to provide a guidance for the stability assessment of geological engineering. In this research, the UCS (Uniaxial compressive strength) loss of six typical sandstones with different water contents after 0, 20, 40 and 60 freeze-thaw cycles was measured in the laboratory. The experimental results indicated that the freeze-thaw damage was more serious in sandstones containing high water contents, and the critical saturations for causing a significant loss of UCS under freeze-thaw were 60%-80% for these sandstones. Below this critical saturation, the UCS loss of the sandstones was mainly caused by water weakening rather than freeze-thaw damage. Besides, a developed strength prediction model was proposed by combining the exponential decay function and multiple linear regression method. The initial porosity, elastic modulus and tensile strength of fresh sandstones were a good parameter combination to accurately determine the decay constant in this developed model. The main novelty of this model is that it can accurately and easily estimate the UCS loss of sandstones after any freeze-thaw cycle only using the initial parameters of fresh sandstones, but it does not need to perform freeze-thaw and mechanical strength experiments. This study not only provides an accurate prediction model of UCS under freeze-thaw, but also makes a contribution to better understanding the frost resistance mechanism of sandstones. (C) 2021 Published by Elsevier B.V. on behalf of China University of Mining & Technology.

Automated summary

Sandstone strength loss under freeze-thaw actions is influenced by water content, with higher water content leading to more severe damage. The UCS loss of sandstones is mainly caused by water weakening within a specific saturation range. The proposed strength prediction model accurately and easily estimates the UCS loss of sandstones after any freeze-thaw cycle without the need for experiments.