4.7 Article

Intrinsic Organic Semiconductors as Hole Transport Layers in p-i-n Perovskite Solar Cells

Related references

Note: Only part of the references are listed.
Review Chemistry, Multidisciplinary

Temperature Induced Aggregation of Organic Semiconductors

Baocai Du et al.

Summary: This review summarizes the temperature-induced aggregation behaviors of organic semiconductors at different processing stages, and discusses the influences of different aggregation states on optoelectronic properties.

CHEMISTRY-A EUROPEAN JOURNAL (2021)

Article Energy & Fuels

Representative identification of spectra and environments (RISE) using k-means

Erin E. Looney et al.

Summary: The study introduces a new method named RISE based on spectral classification to better characterize solar cell performance. By defining 18 representative spectra, the research explores energy yield differences under different locations and technology conditions. Experimental results show that the RISE method can more accurately predict solar cell yield differences in an LED tester.

PROGRESS IN PHOTOVOLTAICS (2021)

Article Multidisciplinary Sciences

Consequence of aging at Au/HTM/perovskite interface in triple cation 3D and 2D/3D hybrid perovskite solar cells

Zubair Ahmad et al.

Summary: Perovskite solar cells show great promise as an alternative to traditional photovoltaic technologies, with 2D/3D hybrid cells offering improved stability and efficiency. However, further research is needed on the degradation processes and charge dynamics at interfaces to enhance long-term performance. Analysis of the Au/HTM/perovskite interface degradation suggests it significantly impacts charge accumulation and impedance, leading to efficiency loss.

SCIENTIFIC REPORTS (2021)

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Article Multidisciplinary Sciences

Interfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability

Zhenghong Dai et al.

Summary: The use of iodine-terminated self-assembled monolayer (I-SAM) in perovskite solar cells (PSCs) leads to increased adhesion toughness at the interface, improved power conversion efficiency, reduced hysteresis, and enhanced operational stability. This is attributed to a decrease in hydroxyl groups at the interface and higher interfacial toughness achieved with I-SAM treatment.

SCIENCE (2021)

Article Chemistry, Multidisciplinary

From Groundwork to Efficient Solar Cells: On the Importance of the Substrate Material in Co-Evaporated Perovskite Solar Cells

Tobias Abzieher et al.

Summary: The study investigates the impact of substrate material selection on co-evaporated perovskite thin films in vacuum processes, highlighting the significant influence on film morphology and incorporation of organic compounds. A selection guide for efficient co-evaporated perovskite thin films is derived, along with a proposed basic crystallization model for co-evaporated perovskite thin films based on insights into film formation on different substrate materials.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Energy & Fuels

Solar cell efficiency tables (Version 58)

Martin A. Green et al.

Summary: This article presents consolidated tables showing the highest confirmed efficiencies for solar cells and modules, along with guidelines for inclusion of results and a review of new entries since January 2021.

PROGRESS IN PHOTOVOLTAICS (2021)

Article Chemistry, Physical

Co-Evaporated Formamidinium Lead Iodide Based Perovskites with 1000 h Constant Stability for Fully Textured Monolithic Perovskite/Silicon Tandem Solar Cells

Marcel Ross et al.

Summary: Formamidinium iodide (FAI) based perovskite absorbers have shown to be ideal candidates for highly efficient and stable perovskite solar cells. By co-evaporating FAPbI(3) and controlling the composition, stability of the black perovskite phase at room temperature is achieved. The addition of methylammonium iodide (MAI) during the co-evaporation process leads to good absorption properties and high PSC efficiencies, maintaining stability over long periods of operation.

ADVANCED ENERGY MATERIALS (2021)

Article Energy & Fuels

Toward All-Vacuum-Processable Perovskite Solar Cells with High Efficiency, Stability, and Scalability Enabled by Fluorinated Spiro-OMeTAD through Thermal Evaporation

Yunseong Choi et al.

Summary: Efficient and stable large-area perovskite solar cells (PSCs) were demonstrated using vacuum-deposited Spiro-mF and MAPbI(3) as hole transport and absorber layers, leading to improved device performance and operational stability. The all-vacuum deposition process enables the fabrication of large-area and scalable PSCs with excellent reliability in device performance.

SOLAR RRL (2021)

Review Chemistry, Multidisciplinary

Lessons learned from spiro-OMeTAD and PTAA in perovskite solar cells

Florine M. Rombach et al.

Summary: Organic semiconductors are crucial in thin-film electronic devices, especially as hole transport layers (HTLs) in perovskite solar cells (PSCs). Spiro-OMeTAD and PTAA have been the leading materials for high efficiency HTLs, with research on their properties contributing to a better understanding of their success mechanisms. This review provides key insights into the electronic and morphological properties, doping strategies, and degradation pathways of spiro-OMeTAD and PTAA, guiding the development of future HTL materials with improved stability and efficiency for PSCs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Efficient Vacuum Deposited P-I-N Perovskite Solar Cells by Front Contact Optimization

Azin Babaei et al.

FRONTIERS IN CHEMISTRY (2020)

Article Nanoscience & Nanotechnology

Co-Evaporated p-i-n Perovskite Solar Cells beyond 20% Efficiency: Impact of Substrate Temperature and Hole-Transport Layer

Marcel Ross et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Nanoscience & Nanotechnology

Thermal degradation of p-doped organic homojunction

Hyun-Kyung Choi et al.

AIP ADVANCES (2020)

Article Chemistry, Physical

The Future of Perovskite Photovoltaics-Thermal Evaporation or Solution Processing?

Yana Vaynzof

ADVANCED ENERGY MATERIALS (2020)

Article Multidisciplinary Sciences

Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss

Mingyu Jeong et al.

SCIENCE (2020)

Article Chemistry, Multidisciplinary

High voltage vacuum-processed perovskite solar cells with organic semiconducting interlayers

Azin Babaei et al.

RSC ADVANCES (2020)

Review Chemistry, Multidisciplinary

Halide Perovskites: Is It All about the Interfaces?

Philip Schulz et al.

CHEMICAL REVIEWS (2019)

Article Chemistry, Physical

Electron-Beam-Evaporated Nickel Oxide Hole Transport Layers for Perovskite-Based Photovoltaics

Tobias Abzieher et al.

ADVANCED ENERGY MATERIALS (2019)

Review Chemistry, Multidisciplinary

Metal Oxide Charge Transport Layers for Efficient and Stable Perovskite Solar Cells

Seong Sik Shin et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Review Chemistry, Multidisciplinary

Synthetic Approaches for Halide Perovskite Thin Films

Wiley A. Dunlap-Shohl et al.

CHEMICAL REVIEWS (2019)

Article Chemistry, Multidisciplinary

Conformal monolayer contacts with lossless interfaces for perovskite single junction and monolithic tandem solar cells

Amran Al-Ashouri et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Review Materials Science, Multidisciplinary

Scalable Deposition Methods for Large-Area Production of Perovskite Thin Films

Richard Swartwout et al.

ENERGY & ENVIRONMENTAL MATERIALS (2019)

Review Chemistry, Multidisciplinary

Organic interfacial materials for perovskite-based optoelectronic devices

Hong Duc Pham et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Review Chemistry, Multidisciplinary

Perovskite Solar Cells: From the Atomic Level to Film Quality and Device Performance

Michael Saliba et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Chemistry, Physical

Interfacial Modification for High-Efficiency Vapor-Phase-Deposited Perovskite Solar Cells Based on a Metal Oxide Buffer Layer

Daniel Perez-del-Rey et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

Article Chemistry, Physical

Influence of doped charge transport layers on efficient perovskite solar cells

Jorge Avila et al.

SUSTAINABLE ENERGY & FUELS (2018)

Review Multidisciplinary Sciences

Challenges for commercializing perovskite solar cells

Yaoguang Rong et al.

SCIENCE (2018)

Article Chemistry, Multidisciplinary

A technoeconomic analysis of perovskite solar module manufacturing with low-cost materials and techniques

Zhaoning Song et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Article Chemistry, Multidisciplinary

Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells

Juan-Pablo Correa-Baena et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Article Chemistry, Physical

Removing Leakage and Surface Recombination in Planar Perovskite Solar Cells

Kristofer Tvingstedt et al.

ACS ENERGY LETTERS (2017)

Article Multidisciplinary Sciences

Substrate-dependent electronic structure and film formation of MAPbI3 perovskites

Selina Olthof et al.

SCIENTIFIC REPORTS (2017)

Article Materials Science, Multidisciplinary

Dipole formation at organic/metal interfaces with pre-deposited and post-deposited metal

Zhanhao Hu et al.

NPG ASIA MATERIALS (2017)

Article Nanoscience & Nanotechnology

High-Work-Function Molybdenum Oxide Hole Extraction Contacts in Hybrid Organic-Inorganic Perovskite Solar Cells

Philip Schulz et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Chemistry, Multidisciplinary

Efficient vacuum deposited p-i-n and n-i-p perovskite solar cells employing doped charge transport layers

Cristina Momblona et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Chemistry, Physical

Valence and Conduction Band Densities of States of Metal Halide Perovskites: A Combined Experimental-Theoretical Study

James Endres et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)

Review Chemistry, Physical

Hole-Transporting Materials in Inverted Planar Perovskite Solar Cells

Weibo Yan et al.

ADVANCED ENERGY MATERIALS (2016)

Article Chemistry, Physical

Fabrication of metal-oxide-free CH3NH3PbI3 perovskite solar cells processed at low temperature

Seungchan Ryu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Review Chemistry, Multidisciplinary

Perovskite Solar Cells: From Materials to Devices

Hyun Suk Jung et al.

SMALL (2015)

Article Chemistry, Physical

High-Efficiency Solution-Processed Planar Perovskite Solar Cells with a Polymer Hole Transport Layer

Dewei Zhao et al.

ADVANCED ENERGY MATERIALS (2015)

Article Chemistry, Multidisciplinary

Interface energetics in organo-metal halide perovskite-based photovoltaic cells

Philip Schulz et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Editorial Material Optics

Utrathin PV Device is Highly Efficient

[Anonymous]

PHOTONICS SPECTRA (2014)

Article Chemistry, Multidisciplinary

Influence of Hole-Transport Layers and Donor Materials on Open-Circuit Voltage and Shape of I-V Curves of Organic Solar Cells

Wolfgang Tress et al.

ADVANCED FUNCTIONAL MATERIALS (2011)

Article Chemistry, Physical

Pitfalls in measuring work function using photoelectron spectroscopy

M. G. Helander et al.

APPLIED SURFACE SCIENCE (2010)

Article Physics, Applied

Characterization of thick film poly(triarylamine) semiconductor diodes for direct x-ray detection

Akarin Intaniwet et al.

JOURNAL OF APPLIED PHYSICS (2009)

Article Chemistry, Multidisciplinary

Systematic Improvement in Charge Carrier Mobility of Air Stable Triarylamine Copolymers

Weimin Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Review Energy & Fuels

Interface dipole at organic/metal interfaces and organic solar cells

X Crispin

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2004)

Article Spectroscopy

Work function measurements on indium tin oxide films

R Schlaf et al.

JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2001)