Related references
Note: Only part of the references are listed.Chemical composition, surface roughness, and ceramic bond strength of additively manufactured cobalt-chromium dental alloys
Marta Revilla-Leon et al.
JOURNAL OF PROSTHETIC DENTISTRY (2021)
Additively Manufactured Tantalum Implants for Repairing Bone Defects: A Systematic Review
Hu Qian et al.
TISSUE ENGINEERING PART B-REVIEWS (2021)
Smart materials in cardiovascular implants: Shape memory alloys and shape memory polymers
Heather Holman et al.
ARTIFICIAL ORGANS (2021)
Design and properties of biomimetic irregular scaffolds for bone tissue engineering
Hao Chen et al.
COMPUTERS IN BIOLOGY AND MEDICINE (2021)
3D printed composite materials for craniofacial implants: current concepts, challenges and future directions
Swati Jindal et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
A hybrid additive manufacturing platform to create bulk and surface composition gradients on scaffolds for tissue regeneration
Ravi Sinha et al.
NATURE COMMUNICATIONS (2021)
Additive Manufacturing Processes in Medical Applications
Mika Salmi
MATERIALS (2021)
Additively manufactured space-filling meta-implants
H. M. A. Kolken et al.
ACTA BIOMATERIALIA (2021)
Mechanically driving supersaturated Fe-Mg solid solution for bone implant: Preparation, solubility and degradation
Cijun Shuai et al.
COMPOSITES PART B-ENGINEERING (2021)
The influence of selective laser melting defects on the fatigue properties of Ti6Al4V porosity graded gyroids for bone implants
Dalia Mahmoud et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
A Review on Corrosion and Wear of Additively Manufactured Alloys
Peter Renner et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2021)
Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: Biomechanical and biocorrosion perspectives
Humayun Kabir et al.
BIOACTIVE MATERIALS (2021)
Additively Manufactured Gradient Porous Ti-6Al-4V Hip Replacement Implants Embedded with Cell-Laden Gelatin Methacryloyl Hydrogels
Elham Davoodi et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Isotropic porous structure design methods based on triply periodic minimal surfaces
Jiawei Feng et al.
MATERIALS & DESIGN (2021)
Developments on Electron Beam Melting (EBM) of Ti-6Al-4V: A Review
Mohammad Karimzadeh Kolamroudi et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2021)
Isotropic octet-truss lattice structure design and anisotropy control strategies for implant application
Jiawei Feng et al.
MATERIALS & DESIGN (2021)
Stretchable and Bioadhesive Gelatin Methacryloyl-Based Hydrogels Enabled by in Situ Dopamine Polymerization
Hossein Montazerian et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
3D printing with particles as feedstock materials
Jun Zhang et al.
ADVANCED POWDER TECHNOLOGY (2021)
Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications
David Svetlizky et al.
MATERIALS TODAY (2021)
Improving mandibular reconstruction by using topology optimization, patient specific design and additive manufacturing?-A biomechanical comparison against miniplates on human specimen
Jan J. Lang et al.
PLOS ONE (2021)
Improvement of an additively manufactured subperiosteal implant structure design by finite elements based topological optimization
Alberto Carnicero et al.
SCIENTIFIC REPORTS (2021)
Extrusion-based 3D printed magnesium scaffolds with multifunctional MgF2 and MgF2-CaP coatings
J. Dong et al.
BIOMATERIALS SCIENCE (2021)
Perspectives of using machine learning in laser powder bed fusion for metal additive manufacturing
S. L. Sing et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2021)
Powder bed fusion process: A brief review
D. Dev Singh et al.
MATERIALS TODAY-PROCEEDINGS (2021)
A Review on Design and Mechanical Properties of Additively Manufactured NiTi Implants for Orthopedic Applications
Yintao Zhang et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2021)
Application of Machine Learning in 3D Bioprinting: Focus on Development of Big Data and Digital Twin
Jia An et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2021)
Biodegradation, Antibacterial Performance, and Cytocompatibility of a Novel ZK30-Cu-Mn Biomedical Alloy Produced by Selective Laser Melting
Bin Xie et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2021)
Integrated Sensors in Advanced Composites: A Critical Review
Hossein Montazerian et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2020)
Permeability and fluid flow-induced wall shear stress in bone scaffolds with TPMS and lattice architectures: A CFD analysis
Davar Ali et al.
EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2020)
Functionally graded and multi-morphology sheet TPMS lattices: Design, manufacturing, and mechanical properties
Oraib Al-Ketan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights
Anton du Plessis et al.
MATERIALS & DESIGN (2020)
3D-Printed Ultra-Robust Surface-Doped Porous Silicone Sensors for Wearable Biomonitoring
Elham Davoodi et al.
ACS NANO (2020)
Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications
Danilo Carluccio et al.
ACTA BIOMATERIALIA (2020)
Biomechanical investigation of a novel hybrid dorsal double plating for distal radius fractures by integrating topology optimization and finite element analysis
Hsuan Chih Liu et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2020)
Review of defects in lattice structures manufactured by powder bed fusion
Ifeanyichukwu Echeta et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Quality analysis in metal additive manufacturing with deep learning
Xiang Li et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2020)
The use of selective laser melting in the fabrication of maxillary and mandibular metal base complete dentures for a patient with Ehlers-Danlos syndrome: A clinical report
Francisco X. Azpiazu-Flores et al.
JOURNAL OF PROSTHETIC DENTISTRY (2020)
Design and statistical analysis of irregular porous scaffolds for orthopedic reconstruction based on voronoi tessellation and fabricated via selective laser melting (SLM)
Yue Du et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
The stiffness of living tissues and its implications for tissue engineering
Carlos F. Guimaraes et al.
NATURE REVIEWS MATERIALS (2020)
Laminated Object Manufacturing of Ceramic-Based Materials
Benjamin Dermeik et al.
ADVANCED ENGINEERING MATERIALS (2020)
Metal Additive Manufacturing Parts Inspection Using Convolutional Neural Network
Wenyuan Cui et al.
APPLIED SCIENCES-BASEL (2020)
Experimental and numerical investigation of selective laser melting-induced defects in Ti-6Al-4V octet truss lattice material: the role of material microstructure and morphological variations
Asma El Elmi et al.
JOURNAL OF MATERIALS RESEARCH (2020)
Topology optimization of structures under design-dependent pressure loads by a boundary identification-load evolution (BILE) model
Osezua Ibhadode et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)
Full-Digital Workflow for Fabricating a Custom-Made Direct Metal Laser Sintering (DMLS) Mandibular Implant: A Case Report
Francesco Grecchi et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2020)
Topology optimization parallel-computing framework based on the inherent strain method for support structure design in laser powder-bed fusion additive manufacturing
Zhi-Dong Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN (2020)
3D bioprinting applications in neural tissue engineering for spinal cord injury repair
Tuba Bedir et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Extrusion and Microfluidic-Based Bioprinting to Fabricate Biomimetic Tissues and Organs
Elham Davoodi et al.
ADVANCED MATERIALS TECHNOLOGIES (2020)
A Review of the Selective Laser Melting Lattice Structures and Their Numerical Models
Zaki Alomar et al.
ADVANCED ENGINEERING MATERIALS (2020)
Design and Fabrication of Implants for Mandibular and Craniofacial Defects Using Different Medical-Additive Manufacturing Technologies: A Review
Dajana Miljanovic et al.
ANNALS OF BIOMEDICAL ENGINEERING (2020)
Fatigue Design of Dental Implant Assemblies: A Nominal Stress Approach
Mikel Armentia et al.
METALS (2020)
Recent developments in metal additive manufacturing
Amit Bandyopadhyay et al.
CURRENT OPINION IN CHEMICAL ENGINEERING (2020)
Parametric design of Voronoi-based lattice porous structures
Hong-Yuan Lei et al.
MATERIALS & DESIGN (2020)
Porous Scaffold Design for Additive Manufacturing in Orthopedics: A Review
Hao Chen et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)
Metal Binder Jetting Additive Manufacturing: A Literature Review
Ming Li et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2020)
Nano-porous anodic alumina: fundamentals and applications in tissue engineering
Elham Davoodi et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2020)
Sacrificial 3D printing of shrinkable silicone elastomers for enhanced feature resolution in flexible tissue scaffolds
Elham Davoodi et al.
ACTA BIOMATERIALIA (2020)
Topological optimization of 3D printed bone analog with PEKK for surgical mandibular reconstruction
Kang-jie Cheng et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Porous fusion cage design via integrated global-local topology optimization and biomechanical analysis of performance
Hongwei Wang et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Metallic additive manufacturing for bone-interfacing implants
Avik Sarker et al.
BIOINTERPHASES (2020)
Design and Optimization of Lattice Structures: A Review
Chen Pan et al.
APPLIED SCIENCES-BASEL (2020)
Manufacturability, Mechanical Properties, Mass-Transport Properties and Biocompatibility of Triply Periodic Minimal Surface (TPMS) Porous Scaffolds Fabricated by Selective Laser Melting
Shuai Ma et al.
MATERIALS & DESIGN (2020)
Fatigue behavior and osseointegration of porous Ti-6Al-4V scaffolds with dense core for dental application
Yinze Xiong et al.
MATERIALS & DESIGN (2020)
A Systematic Approach for Making 3D-Printed Patient-Specific Implants for Craniomaxillofacial Reconstruction
Ruxu Du et al.
ENGINEERING (2020)
3D Printing Decellularized Extracellular Matrix to Design Biomimetic Scaffolds for Skeletal Muscle Tissue Engineering
Silvia Baiguera et al.
BIOMED RESEARCH INTERNATIONAL (2020)
Cobalt-Chromium Dental Alloys: Metal Exposures, Toxicological Risks, CMR Classification, and EU Regulatory Framework
Alina Vaicelyte et al.
CRYSTALS (2020)
A review of NiTi shape memory alloy as a smart material produced by additive manufacturing
Eduard Farber et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Practical implementation of laser polishing on additively manufactured metallic components
Mark W. McDonald et al.
JOURNAL OF LASER APPLICATIONS (2020)
Gradient scaffolds for osteochondral tissue engineering and regeneration
Bin Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2020)
Biocompatibility and mechanical stability of Nitinol as biomaterial for intra-articular prosthetic devices
Caroline Constant et al.
MATERIALIA (2020)
Status of nickel free stainless steel in biomedical field: A review of last 10 years and what else can be done
Lokeswar Patnaik et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Biomaterials in Spinal Implants: A Review
Andrew Warburton et al.
NEUROSPINE (2020)
Additive manufacturing of magnesium alloys
Rakeshkumar Karunakaran et al.
BIOACTIVE MATERIALS (2020)
Finite element analysis and design of an interspinous device using topology optimization
Li-Xin Guo et al.
MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING (2019)
Graphene-Coated Spandex Sensors Embedded into Silicone Sheath for Composites Health Monitoring and Wearable Applications
Hossein Montazerian et al.
SMALL (2019)
Surgical applications of three-dimensional printing in the pelvis and acetabulum: from models and tools to implants
Christian Fang et al.
UNFALLCHIRURG (2019)
Fluid Permeability of Graded Porosity Scaffolds Architectured with Minimal Surfaces
Masoud Zhianmanesh et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Mechanical properties of 3D printed polymeric Gyroid cellular structures: Experimental and finite element study
Diab W. Abueidda et al.
MATERIALS & DESIGN (2019)
Microstructural optimization through heat treatment for enhancing the fracture toughness and fatigue crack growth resistance of selective laser melted Ti-6Al-4V alloy
Punit Kumar et al.
ACTA MATERIALIA (2019)
Piezoresistive sensing in chopped carbon fiber embedded PDMS yarns
H. Montazerian et al.
COMPOSITES PART B-ENGINEERING (2019)
Formation of osseointegrating (bone integrating) surfaces on titanium by laser irradiation
Rickard Olsson et al.
JOURNAL OF LASER APPLICATIONS (2019)
Surface Modification of Biomedical Titanium Alloy: Micromorphology, Microstructure Evolution and Biomedical Applications
Wei Liu et al.
COATINGS (2019)
Early osteointegration evaluation of porous Ti6Al4V scaffolds designed based on triply periodic minimal surface models
Lan Li et al.
JOURNAL OF ORTHOPAEDIC TRANSLATION (2019)
Permeability and mechanical properties of gradient porous PDMS scaffolds fabricated by 3D-printed sacrificial templates designed with minimal surfaces
H. Montazerian et al.
ACTA BIOMATERIALIA (2019)
Topology optimised metallic bone plates produced by electron beam melting: a mechanical and biological study
Abdulsalam Abdulaziz Al-Tamimi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
On the effect of geometrical imperfections and defects on the fatigue strength of cellular lattice structures additively manufactured via Selective Laser Melting
M. Dallago et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
A general multi-objective topology optimization methodology developed for customized design of pelvic prostheses
Taimoor Iqbal et al.
MEDICAL ENGINEERING & PHYSICS (2019)
Vertebral Reconstruction with Customized 3-Dimensional-Printed Spine Implant Replacing Large Vertebral Defect with 3-Year Follow-up
Kyu Seon Chung et al.
WORLD NEUROSURGERY (2019)
Designing Cellular Structures for Additive Manufacturing Using Voronoi-Monte Carlo Approach
Tao Liu et al.
POLYMERS (2019)
The design and in vivo testing of a locally stiffness-matched porous scaffold
Shaaz Ghouse et al.
APPLIED MATERIALS TODAY (2019)
Mitigation of scan strategy effects and material anisotropy through supersolvus annealing in LPBF IN718
David J. Newell et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Controlling mechanical properties of additively manufactured hastelloy X by altering solidification pattern during laser powder-bed fusion
Ali Keshavarzkermani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effects of microstructure and internal defects on mechanical anisotropy and asymmetry of selective laser-melted 316L austenitic stainless steel
Jin Myoung Jeon et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Restorative design and associated risks for peri-implant diseases
Douglas R. Dixon et al.
PERIODONTOLOGY 2000 (2019)
Evaluation of Low Cycle Fatigue Performance of Selective Laser Melted Titanium Alloy Ti-6Al-4V
Peng Zhang et al.
METALS (2019)
Application of Directed Energy Deposition-Based Additive Manufacturing in Repair
Abdollah Saboori et al.
APPLIED SCIENCES-BASEL (2019)
Finite element analysis of mechanical behavior, permeability of irregular porous scaffolds and lattice-based porous scaffolds
Yue Du et al.
MATERIALS RESEARCH EXPRESS (2019)
Effect of hot isostatic pressing (HIP) treatment on the compressive properties of Ti6Al4V lattice structure fabricated by selective laser melting
Xingchen Yan et al.
MATERIALS LETTERS (2019)
Comparison of 3D-printed porous tantalum and titanium scaffolds on osteointegration and osteogenesis
Han Wang et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Impacts of process-induced porosity on material properties of copper made by binder jetting additive manufacturing
Ashwath Yegyan Kumar et al.
MATERIALS & DESIGN (2019)
Investigation of functionally graded TPMS structures fabricated by additive manufacturing
Shixiang Yu et al.
MATERIALS & DESIGN (2019)
Achievements in the Topographic Design of Commercial Titanium Dental Implants: Towards Anti-Peri-Implantitis Surfaces
Gerardo Asensio et al.
JOURNAL OF CLINICAL MEDICINE (2019)
Recent advancements in Fe-based biodegradable materials for bone repair
R. Gorejova et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Trabecular-like Ti-6Al-4V scaffolds for orthopedic: fabrication by selective laser melting and in vitro biocompatibility
Huixin Liang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
The design of additively manufactured lattices to increase the functionality of medical implants
Hanna E. Burton et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Topology optimization of bone using cubic material design and evolutionary methods based on internal remodeling
Ibrahim Goda et al.
MECHANICS RESEARCH COMMUNICATIONS (2019)
A personalized mandibular implant with supporting and porous structures designed with topology optimization - a case study of canine
Kangjie Cheng et al.
RAPID PROTOTYPING JOURNAL (2019)
On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing
Reza Esmaeilizadeh et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Analysis of Density, Roughness, and Accuracy of the Atomic Diffusion Additive Manufacturing (ADAM) Process for Metal Parts
Manuela Galati et al.
MATERIALS (2019)
SLM lattice structures: Properties, performance, applications and challenges
Tobias Maconachie et al.
MATERIALS & DESIGN (2019)
Effect of geometry on the mechanical properties of Ti-6Al-4V Gyroid structures fabricated via SLM: A numerical study
Eric Yang et al.
MATERIALS & DESIGN (2019)
Additively manufactured porous metallic biomaterials
Amir A. Zadpoor
JOURNAL OF MATERIALS CHEMISTRY B (2019)
Challenges in the design and regulatory approval of 3D-printed surgical implants: a two-case series
Koen Willemsen et al.
LANCET DIGITAL HEALTH (2019)
Three-dimensional printing of metals for biomedical applications
J. Ni et al.
MATERIALS TODAY BIO (2019)
Gradient nanocomposite hydrogels for interface tissue engineering
Lauren M. Cross et al.
NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE (2018)
3D-printed gelatin scaffolds of differing pore geometry modulate hepatocyte function and gene expression
Phillip L. Lewis et al.
ACTA BIOMATERIALIA (2018)
Additively manufactured biodegradable porous magnesium
Y. Li et al.
ACTA BIOMATERIALIA (2018)
Microarchitected Stretching-Dominated Mechanical Metamaterials with Minimal Surface Topologies
Oraib Al-Ketan et al.
ADVANCED ENGINEERING MATERIALS (2018)
Metal Alloys for Fusion-Based Additive Manufacturing
Duyao Zhang et al.
ADVANCED ENGINEERING MATERIALS (2018)
3D-printed multimaterial composites tailored for compliancy and strain recovery
M. R. Mansouri et al.
COMPOSITE STRUCTURES (2018)
Design of complex bone internal structure using topology optimization with perimeter control
Jaejong Park et al.
COMPUTERS IN BIOLOGY AND MEDICINE (2018)
Selective electron beam manufactured Ti-6Al-4V lattice structures for orthopedic implant applications: Current status and outstanding challenges
X. Z. Zhang et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2018)
Infill Optimization for Additive Manufacturing-Approaching Bone-Like Porous Structures
Jun Wu et al.
IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS (2018)
Additively-manufactured functionally graded Ti-6Al-4V lattice structures with high strength under static and dynamic loading: Experiments
Xiao Lijun et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)
Study of Selective Laser Melting of intermetallic TiAl powder using integral analysis
Maria Doubenskaia et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: A review
Hooyar Attar et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
The Design Process of Additively Manufactured Mesoscale Lattice Structures: A Review
Francesco Tamburrino et al.
JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING (2018)
A novel use of 3D printing model demonstrates the effects of deteriorated trabecular bone structure on bone stiffness and strength
Meir Max Barak et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Continuous functionally graded porous titanium scaffolds manufactured by selective laser melting for bone implants
Changjun Han et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Compressive characteristics of radially graded porosity scaffolds architectured with minimal surfaces
M. Afshar et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Effect of heat-treatment temperature on microstructures and mechanical properties of Co-Cr-Mo alloys fabricated by selective laser melting
Yuka Kajima et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
A review of powder additive manufacturing processes for metallic biomaterials
W. S. W. Harun et al.
POWDER TECHNOLOGY (2018)
Selective laser melting of lattice structures: A statistical approach to manufacturability and mechanical behavior
Swee Leong Sing et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2018)
A TPMS-based method for modeling porous scaffolds for bionic bone tissue engineering
Jianping Shi et al.
SCIENTIFIC REPORTS (2018)
Electron beam melting in the fabrication of three-dimensional mesh titanium mandibular prosthesis scaffold
Rongzeng Yan et al.
SCIENTIFIC REPORTS (2018)
Geometric Modeling of Cellular Materials for Additive Manufacturing in Biomedical Field: A Review
Gianpaolo Savio et al.
APPLIED BIONICS AND BIOMECHANICS (2018)
Rationally designed meta-implants: a combination of auxetic and conventional meta-biomaterials
Helena M. A. Kolken et al.
MATERIALS HORIZONS (2018)
Design and Compressive Behavior of Controllable Irregular Porous Scaffolds: Based on Voronoi-Tessellation and for Additive Manufacturing
Guanjun Wang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Mechanical properties and energy absorption capability of functionally graded F2BCC lattice fabricated by SLM
Dheyaa S. J. Al-Saedi et al.
MATERIALS & DESIGN (2018)
Additive manufacturing of compositionally gradient metal-ceramic structures: Stainless steel to vanadium carbide
Thomas Gualtieri et al.
MATERIALS & DESIGN (2018)
A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
Haniyeh Fayazfar et al.
MATERIALS & DESIGN (2018)
Design and Compressive Behavior of Controllable Irregular Porous Scaffolds: Based on Voronoi-Tessellation and for Additive Manufacturing
Guanjun Wang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Ultrahigh-strength titanium gyroid scaffolds manufactured by selective laser melting (SLM) for bone implant applications
Arash Ataee et al.
ACTA MATERIALIA (2018)
Biomimetic 3D-printed custom-made prosthesis for anterior column reconstruction in the thoracolumbar spine: a tailored option following en bloc resection for spinal tumors: Preliminary results on a case-series of 13 patients
Marco Girolami et al.
EUROPEAN SPINE JOURNAL (2018)
Mechanical response of a triply periodic minimal surface cellular structures manufactured by selective laser melting
Lei Yang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Hip Implant Design With Three-Dimensional Porous Architecture of Optimized Graded Density
Yingjun Wang et al.
JOURNAL OF MECHANICAL DESIGN (2018)
In vivo reprogramming of wound-resident cells generates skin epithelial tissue
Masakazu Kurita et al.
NATURE (2018)
Improved dynamic impact behaviour of wire-arc additive manufactured ATI 718Plus®
G. Asala et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Selective Laser Melting Strategy for Fabrication of Thin Struts Usable in Lattice Structures
Radek Vrana et al.
MATERIALS (2018)
Assay of Secondary Anisotropy in Additively Manufactured Alloys for Dental Applications
Elena Bassoli et al.
MATERIALS (2018)
Fatigue life of additively manufactured Ti6Al4V scaffolds under tension-tension, tension-compression and compression-compression fatigue load
Karel Lietaert et al.
SCIENTIFIC REPORTS (2018)
Porous Scaffold Design Based on Minimal Surfaces: Development and Assessment of Variable Architectures
Rita Ambu et al.
SYMMETRY-BASEL (2018)
Effect of porosity variation strategy on the performance of functionally graded Ti-6Al-4V scaffolds for bone tissue engineering
Xiang-Yu Zhang et al.
MATERIALS & DESIGN (2018)
Functionally graded porous scaffolds in multiple patterns: New design method, physical and mechanical properties
Fei Liu et al.
MATERIALS & DESIGN (2018)
Interactive design and manufacturing of a Voronoi-based biomimetic bone scaffold for morphological characterization
M. Fantini et al.
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM (2018)
Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review
Lai-Chang Zhang et al.
ADVANCED ENGINEERING MATERIALS (2018)
Triply Periodic Minimal Surfaces Sheet Scaffolds for Tissue Engineering Applications: An Optimization Approach toward Biomimetic Scaffold Design
Sanjairaj Vijayavenkataraman et al.
ACS APPLIED BIO MATERIALS (2018)
Design, analysis and manufacturing of lattice structures: an overview
Mark Helou et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2018)
Magnesium-based Biodegradable Materials for Biomedical Applications
Chaoxing Zhang et al.
MRS ADVANCES (2018)
Predicting permeability of regular tissue engineering scaffolds: scaling analysis of pore architecture, scaffold length, and fluid flow rate effects
A. Rahbari et al.
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING (2017)
Effects of Hip Implant Modular Neck Material and Assembly Method on Fatigue Life and Distraction Force
Fahad Aljenaei et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2017)
Fully Porous 3D Printed Titanium Femoral Stem to Reduce Stress-Shielding Following Total Hip Arthroplasty
Sajad Arabnejad et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2017)
Modern implant dentistry based on osseointegration: 50 years of progress, current trends and open questions
Daniel Buser et al.
PERIODONTOLOGY 2000 (2017)
Selective Laser Melting of Magnesium and Magnesium Alloy Powders: A Review
Vyasaraj Manakari et al.
METALS (2017)
Impact response of additively manufactured metallic hybrid lattice materials
J. A. Harris et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)
A review of gradient stiffness hydrogels used in tissue engineering and regenerative medicine
Tingting Xia et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2017)
3D printing and modelling of customized implants and surgical guides for non-human primates
Xing Chen et al.
JOURNAL OF NEUROSCIENCE METHODS (2017)
The relationships between deformation mechanisms and mechanical properties of additively manufactured porous biomaterials
J. Kadkhodapour et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Compensation strategy to reduce geometry and mechanics mismatches in porous biomaterials built with Selective Laser Melting
Zahra S. Bagheri et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Finite element analysis of mechanical behavior, permeability and fluid induced wall shear stress of high porosity scaffolds with gyroid and lattice-based architectures
Davar Ali et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Composition optimization of low modulus and high-strength TiNb-based alloys for biomedical applications
I. V. Okulov et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Elastic and failure response of imperfect three-dimensional metallic lattices: the role of geometric defects induced by Selective Laser Melting
Lu Liu et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2017)
Preliminary study on the corrosion resistance, antibacterial activity and cytotoxicity of selective-laser-melted Ti6Al4V-xCu alloys
Sai Guo et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Comparison on mechanical anisotropies of selective laser melted Ti-6Al-4V alloy and 304 stainless steel
Hanchen Yu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Anisotropic response of Ti-6Al-4V alloy fabricated by 3D printing selective laser melting
L. Y. Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Plastic deformation and fracture behaviour of high-nitrogen nickel-free austenitic stainless steel
Guixun Sun et al.
MATERIALS SCIENCE AND TECHNOLOGY (2017)
X-ray Tomography Characterisation of Lattice Structures Processed by Selective Electron Beam Melting
Everth Hernandez-Nava et al.
METALS (2017)
Longitudinal and radial permeability analysis of additively manufactured porous scaffolds: Effect of pore shape and porosity
H. Montazerian et al.
MATERIALS & DESIGN (2017)
Porous scaffold internal architecture design based on minimal surfaces: A compromise between permeability and elastic properties
H. Montazerian et al.
MATERIALS & DESIGN (2017)
Mechanical properties of 3D printed polymeric cellular materials with triply periodic minimal surface architectures
Diab W. Abueidda et al.
MATERIALS & DESIGN (2017)
Compressive properties of functionally graded lattice structures manufactured by selective laser melting
Sing Ying Choy et al.
MATERIALS & DESIGN (2017)
Computationally designed lattices with tuned properties for tissue engineering using 3D printing
Paul F. Egan et al.
PLOS ONE (2017)
Spatial Control of Functional Response in 4D-Printed Active Metallic Structures
Ji Ma et al.
SCIENTIFIC REPORTS (2017)
Structural and mechanical characterization of custom design cranial implant created using additive manufacturing
Khaja Moiduddin et al.
ELECTRONIC JOURNAL OF BIOTECHNOLOGY (2017)
Microstructure and mechanical properties of functionally graded TiCp/Ti6A14V composite fabricated by laser melting deposition
Liqun Li et al.
CERAMICS INTERNATIONAL (2017)
Influence of Porosity and Pore-Size Distribution in Ti6Al4 V Foam on Physicomechanical Properties, Osteogenesis, and Quantitative Validation of Bone Ingrowth by Micro-Computed Tomography
Kausik Kapat et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Mechanical characterization of structurally porous biomaterials built via additive manufacturing: experiments, predictive models, and design maps for load-bearing bone replacement implants
D. Melancon et al.
ACTA BIOMATERIALIA (2017)
Metallic Biomaterials: Current Challenges and Opportunities
Karthika Prasad et al.
MATERIALS (2017)
Additively manufactured metallic porous biomaterials based on minimal surfaces: A unique combination of topological, mechanical, and mass transport properties
F. S. L. Bobbert et al.
ACTA BIOMATERIALIA (2017)
Compressive and fatigue behavior of beta-type titanium porous structures fabricated by electron beam melting
Y. J. Liu et al.
ACTA MATERIALIA (2017)
Topology Optimization of Total Femur Structure: Application of Parameterized Level Set Method Under Geometric Constraints
Xiaowei Deng et al.
JOURNAL OF MECHANICAL DESIGN (2016)
Stress-based design of thermal structures via topology optimization
Joshua D. Deaton et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2016)
Tailored Surface Treatment of 3D Printed Porous Ti6Al4V by Microarc Oxidation for Enhanced Osseointegration via Optimized Bone In-Growth Patterns and Interlocked Bone/Implant Interface
Peng Xiu et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints
Sajad Arabnejad et al.
ACTA BIOMATERIALIA (2016)
Mechanical analyses of Shellular, an ultralow-density material
Min Geun Lee et al.
ACTA MATERIALIA (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Architected Cellular Materials
Tobias A. Schaedler et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Co-Cr dental alloys induces cytotoxicity and inflammatory responses via activation of Nrf2/antioxidant signaling pathways in human gingival fibroblasts and osteoblasts
Eun-Cheol Kim et al.
DENTAL MATERIALS (2016)
Comparison of the transformation temperatures of heat-activated Nickel-Titanium orthodontic archwires by two different techniques
Noor Aminah Obaisi et al.
DENTAL MATERIALS (2016)
Energy absorption in lattice structures in dynamics: Experiments
Zuhal Ozdemir et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)
Selective laser melting of titanium alloy with 50 wt% tantalum: Microstructure and mechanical properties
Swee Leong Sing et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Additive manufacturing and mechanical characterization of graded porosity scaffolds designed based on triply periodic minimal surface architectures
M. Afshar et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment
Naoya Taniguchi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Anisotropy in the impact toughness of selective laser melted Ti-6Al-4V alloy
Ming-Wei Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Microstructure and anisotropic tensile behavior of laser additive manufactured TC21 titanium alloy
Qiang Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Advances in Bioprinting Technologies for Craniofacial Reconstruction
Dafydd O. Visscher et al.
TRENDS IN BIOTECHNOLOGY (2016)
Tuning Cell Differentiation into a 3D Scaffold Presenting a Pore Shape Gradient for Osteochondral Regeneration
Andrea Di Luca et al.
ADVANCED HEALTHCARE MATERIALS (2016)
Brief Overview on Nitinol as Biomaterial
Abdul Wadood
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2016)
Printability of alloys for additive manufacturing
T. Mukherjee et al.
SCIENTIFIC REPORTS (2016)
Improving Osteointegration and Osteogenesis of Three-Dimensional Porous Ti6AI4V Scaffolds by Polydopamine-Assisted Biomimetic Hydroxyapatite Coating
Yong Li et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing
Beth E. Carroll et al.
ACTA MATERIALIA (2015)
A New Type of Low Density Material: Shellular
Seung Chul Han et al.
ADVANCED MATERIALS (2015)
Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited
Christian Weller et al.
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2015)
Iron and iron-based alloys for temporary cardiovascular applications
A. Francis et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2015)
Ti-6Al-4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting
Chunze Yan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Failure mechanisms of additively manufactured porous biomaterials: Effects of porosity and type of unit cell
J. Kadkhodapour et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Microstructure and corrosion behavior of laser processed NiTi alloy
Jithin J. Marattukalam et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Mechanical behavior of porous commercially pure Ti and Ti-TiB composite materials manufactured by selective laser melting
H. Attar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
An exploration of binder jetting of copper
Yun Bai et al.
RAPID PROTOTYPING JOURNAL (2015)
Bone tissue regeneration: the role of scaffold geometry
Amir A. Zadpoor
BIOMATERIALS SCIENCE (2015)
Evaluation of additive manufacturing (AM) techniques for the production of metal-ceramic dental restorations
Eleonora Atzeni et al.
JOURNAL OF MANUFACTURING PROCESSES (2015)
Plastic deformation and compressive mechanical properties of hollow sphere aluminum foams produced by space holder technique
J. Kadkhodapour et al.
MATERIALS & DESIGN (2015)
The effects of solid-state phase transformation upon stress evolution in laser metal powder deposition
J. X. Fang et al.
MATERIALS & DESIGN (2015)
Biomimetic biphasic scaffolds for osteochondral defect repair
Xuezhou Li et al.
REGENERATIVE BIOMATERIALS (2015)
Experimental validation of 3D printed patient-specific implants using digital image correlation and finite element analysis
Alok Sutradhar et al.
COMPUTERS IN BIOLOGY AND MEDICINE (2014)
Effects of scaffold architecture on cranial bone healing
A. Berner et al.
INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2014)
Additive manufacturing: A framework for implementation
Stephen Mellor et al.
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2014)
Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting
F. Calignano
MATERIALS & DESIGN (2014)
Evaluation of fracture toughness and impact toughness of laser rapid manufactured Inconel-625 structures and their co-relation
Ganesh Puppala et al.
MATERIALS & DESIGN (2014)
Printability of calcium phosphate: Calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3D printing technique
Zuoxin Zhou et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Investigating internal architecture effect in plastic deformation and failure for TPMS-based scaffolds using simulation methods and experimental procedure
J. Kadkhodapour et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Selective laser melting (SLM) of pure gold for manufacturing dental crowns
Mushtaq Khan et al.
RAPID PROTOTYPING JOURNAL (2014)
In Vivo Study of a Self-Stabilizing Artificial Vertebral Body Fabricated by Electron Beam Melting
Jun Yang et al.
SPINE (2014)
New Developments of Ti-Based Alloys for Biomedical Applications
Yuhua Li et al.
MATERIALS (2014)
Repair of injured spinal cord using biomaterial scaffolds and stem cells
Bikesh Shrestha et al.
STEM CELL RESEARCH & THERAPY (2014)
Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
G. Campoli et al.
MATERIALS & DESIGN (2013)
Comparative study on corrosion behaviour of Nitinol and stainless steel orthodontic wires in simulated saliva solution in presence of fluoride ions
M. Mirjalili et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Production of customized hip stem prostheses - a comparison between conventional machining and electron beam melting (EBM)
Marie Cronskar et al.
RAPID PROTOTYPING JOURNAL (2013)
Topology optimization approaches A comparative review
Ole Sigmund et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2013)
Geometry as a Factor for Tissue Growth: Towards Shape Optimization of Tissue Engineering Scaffolds
Cecile M. Bidan et al.
ADVANCED HEALTHCARE MATERIALS (2013)
Printability of calcium phosphate powders for three-dimensional printing of tissue engineering scaffolds
Andre Butscher et al.
ACTA BIOMATERIALIA (2012)
The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds
S. Van Bael et al.
ACTA BIOMATERIALIA (2012)
Prediction of permeability of regular scaffolds for skeletal tissue engineering: A combined computational and experimental study
S. Truscello et al.
ACTA BIOMATERIALIA (2012)
Biomedical coatings on magnesium alloys - A review
H. Hornberger et al.
ACTA BIOMATERIALIA (2012)
Evaluations of cellular lattice structures manufactured using selective laser melting
Chunze Yan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
A paradigm for the development and evaluation of novel implant topologies for bone fixation: Implant design and fabrication
Heesuk Kang et al.
JOURNAL OF BIOMECHANICS (2012)
Characterizations of additive manufactured porous titanium implants
Ahmad Basalah et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2012)
3D-printing of highly uniform CaSiO3 ceramic scaffolds: preparation, characterization and in vivo osteogenesis
Chengtie Wu et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
In vitro biocompatibility of Co-Cr alloy fabricated by selective laser melting or traditional casting techniques
X. Z. Xin et al.
MATERIALS LETTERS (2012)
Material properties of Ti6Al4V parts produced by laser metal deposition
Jun Yu et al.
LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012) (2012)
Electron beam melting of Ti-48Al-2Cr-2Nb alloy: Microstructure and mechanical properties investigation
S. Biamino et al.
INTERMETALLICS (2011)
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti-24Nb-4Zr-8Sn alloy
L. C. Zhang et al.
SCRIPTA MATERIALIA (2011)
Fabrication of three-dimensional scaffolds using precision extrusion deposition with an assisted cooling device
Q. Hamid et al.
BIOFABRICATION (2011)
Porous tantalum structures for bone implants: Fabrication, mechanical and in vitro biological properties
Vamsi Krishna Balla et al.
ACTA BIOMATERIALIA (2010)
Direct laser processing of a tantalum coating on titanium for bone replacement structures
Vamsi Krishna Balla et al.
ACTA BIOMATERIALIA (2010)
Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting
L. E. Murr et al.
ACTA MATERIALIA (2010)
A study of the micro structural evolution during selective laser melting of Ti-6Al-4V
Lore Thijs et al.
ACTA MATERIALIA (2010)
Biomaterial Design Strategies for the Treatment of Spinal Cord Injuries
Karin S. Straley et al.
JOURNAL OF NEUROTRAUMA (2010)
Design and fabrication of CoCrMo alloy based novel structures for load bearing implants using laser engineered net shaping
Felix A. Espana et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2010)
Scaffold Design and Manufacturing: From Concept to Clinic
Scott J. Hollister
ADVANCED MATERIALS (2009)
3D finite element temperature field modelling for direct laser fabrication
Jia Yang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Metal-Ceramic Alloys in Dentistry: A Review
Howard W. Roberts et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2009)
Functionally graded Co-Cr-Mo coating on Ti-6Al-4V alloy structures
B. Vamsi Krishna et al.
ACTA BIOMATERIALIA (2008)
Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain
Tolga Akova et al.
DENTAL MATERIALS (2008)
Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition
G. P. Dinda et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Dynamic Compressive response of stainless-steel square honeycombs
G. J. McShane et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2007)
Pin-on-disk wear behavior in a like-on-like configuration in a biological environment of high carbon cast and low carbon forged Co-29Cr-6Mo alloys
Akihiko Chiba et al.
ACTA MATERIALIA (2007)
Temperature effects on the lattice constants and crystal structure of a Co-27Cr-5Mo low-carbon alloy
AJ Saldivar-Garcia et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Study of the key technologies of LOM for functional metal parts
SP Yi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
A systematic review of the survival and complication rates of fixed partial dentures (FPDs) after an observation period of at least 5 years -: I.: Implant-supported FPDs
BE Pjetursson et al.
CLINICAL ORAL IMPLANTS RESEARCH (2004)
Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs
KF Leong et al.
BIOMATERIALS (2003)
The effect of microstructure on the mechanical properties of two-phase titanium alloys
R Filip et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Biological interactions of dental cast alloys with oral tissues
G Schmalz et al.
DENTAL MATERIALS (2002)
Microstructural evolution of a Ti-6Al-4V alloy during thermomechanical processing
R Ding et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Mechanism of bonelike apatite formation on bioactive tantalum metal in a simulated body fluid
T Miyazaki et al.
BIOMATERIALS (2002)
Recent metallic materials for biomedical applications
M Niinomi
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)
Share Paper
