Related references
Note: Only part of the references are listed.Strain rate sensitivity behaviour of Fe-21Cr-1.5Ni-5Mn alloy and its constitutive modelling
Tushar Ramdas Dandekar et al.
MATERIALS CHEMISTRY AND PHYSICS (2021)
Multistep Cross Rolling of UNS S32101 Steel: Microstructure, Texture, and Magnetic Properties
Tushar R. Dandekar et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Evolution of Microstructure and Texture in UNS S32750 Super Duplex Stainless Steel Weldments
Tushar Ramdas Dandekar et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2021)
A multiscale investigation into the effect of grain size on void evolution and ductile fracture: Experiments and crystal plasticity modeling
Xiaoqing Shang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Effect of Cooling Rate on the Precipitation Behavior of a Fe-Cr-Ni Alloy
Amit Kumar et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2020)
Precipitation behavior of sigma phase and its influence on mechanical properties of a Ni-Fe based alloy
Changshuai Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Investigation of Electroplastic Effect on Four Grades of Duplex Stainless Steels
Claudio Gennari et al.
MATERIALS (2019)
Effects of grain size on tensile property and fracture morphology of 316L stainless steel
Wenbo Qin et al.
MATERIALS LETTERS (2019)
Effect of the Heat Treatment on the Corrosion Resistance of Duplex Stainless Steels
Luca Pezzato et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Deciphering the Possible Role of Strain Path on the Evolution of Microstructure, Texture, and Magnetic Properties in a Fe-Cr-Ni Alloy
Amit Kumar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Microstructure and Texture Development during Cold Rolling in UNS S32205 and UNS S32760 Duplex Stainless Steels
Amit Kumar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Precipitation and Phase Transformations in 2101 Lean Duplex Stainless Steel During Isothermal Aging
Jean-Yves Maetz et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Structural developments in un-stabilized ultra low carbon steel during warm deformation and annealing
Rahul Unnikrishnan et al.
MATERIALS CHEMISTRY AND PHYSICS (2016)
Thermal ageing on the deformation and fracture mechanisms of a duplex stainless steel by quasi in-situ tensile test under OM and SEM
Y. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
M23C6 carbides and Cr2N nitrides in aged duplex stainless steel: A SEM, TEM and FIB tomography investigation
J. -Y. Maetz et al.
MICRON (2016)
Development of a Lean Duplex Stainless Steel
Mats Liljas et al.
STEEL RESEARCH INTERNATIONAL (2016)
Effect of volume fraction of phases and precipitates on the mechanical behavior of UNS S31803 duplex stainless steel
J. C. de Lacerda et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
Nanostructure evolution and mechanical property changes during aging of a super duplex stainless steel at 300°C
Niklas Pettersson et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Loss of constraint during fracture toughness testing of duplex stainless steels
Johan Pilhagen et al.
ENGINEERING FRACTURE MECHANICS (2013)
Effect of long-term thermal aging on the mechanical properties of casting duplex stainless steels
Y. H. Yao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
NIH Image to ImageJ: 25 years of image analysis
Caroline A. Schneider et al.
NATURE METHODS (2012)
Study of phase transformation and mechanical properties evolution of duplex stainless steels after long term thermal ageing (>20 years)
C. Pareige et al.
JOURNAL OF NUCLEAR MATERIALS (2011)
Precipitation of Second Phases in High-Interstitial-Alloyed Austenitic Steel
Tae-Ho Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
The microstructure, hardness and tensile properties of a new super high strength aluminum alloy with Zr addition
S. H. Seyed Ebrahimi et al.
MATERIALS & DESIGN (2010)
Study of precipitation in 2101 duplex stainless steel
W. Zhang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2010)
Influence of annealing treatment on the corrosion resistance of lean duplex stainless steel 2101
Lihua Zhang et al.
ELECTROCHIMICA ACTA (2009)
Investigation of selective corrosion resistance of aged lean duplex stainless steel 2101 by non-destructive electrochemical techniques
Juan Gao et al.
ELECTROCHIMICA ACTA (2009)
Effect of the annealing temperature on the mechanical properties, formability and corrosion resistance of hot-rolled duplex stainless steel
G. Fargas et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Effect of aging on the corrosion resistance of 2101 lean duplex stainless steel
Lihua Zhang et al.
MATERIALS CHARACTERIZATION (2009)
Effect of 475 °C embrittlement on the mechanical properties of duplex stainless steel
J. K. Sahu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Effect of aging on impact properties of ASTM A890 Grade 1C super duplex stainless steel
Marcelo Martins et al.
MATERIALS CHARACTERIZATION (2008)
On the effect of nickel substitution in duplex stainless steel
S. M. Wessman et al.
MATERIALS SCIENCE AND TECHNOLOGY (2008)
Geometry of dimples and its correlation with mechanical properties in austenitic stainless steel
Arpan Das et al.
SCRIPTA MATERIALIA (2008)
Duplex stainless steels - a review after DSS '07 held in Grado
Jacques Charles
STEEL RESEARCH INTERNATIONAL (2008)
Sigma phase precipitation in duplex stainless steel 2205
Henrik Sieurin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Effect of intermetallic precipitations on the properties of duplex stainless steel
Michael Pohl et al.
MATERIALS CHARACTERIZATION (2007)
Fracture toughness of the lean duplex stainless steel LDX 2101
Henrik Sieurin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Comparative study on sigma phase precipitation of three types of stainless steels: austenitic, superferritic and duplex
D. M. E. Villanueva et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
Effects of nitrogen and high temperature aging on σ phase precipitation of duplex stainless steel
CS Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Microstructure and mechanical properties of friction stir welded SAF 2507 super duplex stainless steel
YS Sato et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Precipitation of σ-phase in high-nitrogen austenitic 18Cr-18Mn-2Mo-0.9N stainless steel during isothermal aging
TH Lee et al.
SCRIPTA MATERIALIA (2004)
Energy-dispersive spectroscopy and electron backscatter diffraction analysis of isothermally aged SAF 2507 type superduplex stainless steel
J Dobranszky et al.
SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY (2004)
Effect of weld metal chemistry and heat input on the structure and properties of duplex stainless steel welds
V Muthupandi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
The relationship between chromium nitride and secondary austenite precipitation in duplex stainless steels
AJ Ramirez et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2003)
The effect of high-temperature exposure on the microstructural stability and toughness property in a 2205 duplex stainless steel
TH Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Modelling of materials properties in duplex stainless steels
X Li et al.
MATERIALS SCIENCE AND TECHNOLOGY (2002)
Microstructure and pitting corrosion in simulated heat-affected zones of duplex stainless steels
HY Liou et al.
MATERIALS CHEMISTRY AND PHYSICS (2002)
Redistribution of the substitutional elements during σ and χ phase formation in a duplex stainless steel
L Duprez et al.
STEEL RESEARCH (2001)
Effect of microstructure evolution on fracture toughness in isothermally aged austenitic stainless steels for cryogenic applications
ML Saucedo-Muñoz et al.
CRYOGENICS (2000)
Microstructure evolution during isothermal annealing of a standard duplex stainless steel type 1.4462
L Duprez et al.
STEEL RESEARCH (2000)
Effect of aging treatments on microstructure and impact properties of tungsten substituted 2205 duplex stainless steel
YS Ahn et al.
MATERIALS SCIENCE AND TECHNOLOGY (2000)
Mechanical properties, microstructural stability and kinetics of sigma-phase formation in 29Cr-6Ni-2Mo-0.38N superduplex stainless steel
JO Nilsson et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)