Related references
Note: Only part of the references are listed.Microstructural, mechanical and wear characteristics of aluminum matrix composites fabricated by friction stir processing
Pabitra Maji et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)
Dissimilar friction stir welding of AA2198 and AA7475: Effect of solution treatment and aging on the microstructure and mechanical strength
M. R. Jandaghi et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Effect of post-weld heat treatment on double-sided friction stir welded joint of 120 mm ultra-thick SiCp/Al composite plates
Qi Qiao et al.
MATERIALS CHARACTERIZATION (2020)
Effect of post-weld heat treatment on the mechanical behavior and dislocation density of friction stir welded Al6061
Amir Hossein Baghdadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of filler material and post process ageing treatment on microstructure, mechanical properties and wear behaviour of friction stir processed AA 7075 surface composites
H. A. Deore et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Sustainability of friction stir welded AA6082 plates through post-weld solution heat treatment
Sarafadeen Azeez et al.
SUSTAINABLE MANUFACTURING FOR GLOBAL CIRCULAR ECONOMY (2019)
Effects of welding parameters and post-heat treatment on mechanical properties of friction stir welded AA2195-T8 Al-Li alloy
J. Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Microstructure and mechanical properties of friction stir welded oxide dispersion strengthened AA6063 aluminum matrix composites enhanced by post-weld heat treatment
Xichen Tao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of precipitation hardening heat treatment on mechanical and microstructure features of dissimilar friction stir welded AA2024-T6 and AA6061-T6 alloys
Hossein Karami Pabandi et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Effect of post-weld heat treatment on joint properties of dissimilar friction stir welded 2024-T4 and 7075-T6 aluminum alloys
B. Safarbali et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2018)
Influences of Friction Stir Welding and Post-Weld Heat Treatment on Al-Cu-Li Alloy
Yi Lin et al.
ADVANCED ENGINEERING MATERIALS (2018)
Impact of thermal management on post weld heat treatment efficacy in friction stir welded 2050-T3 alloy
Harpreet Sidhar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effect of Post-weld Heat Treatment on Microstructure and Mechanical Properties of Friction Stir Welded SSM7075 Aluminium Alloy
Muangjunburee Prapas et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2017)
Influence of heat treatment on mechanical properties and microstructure of the Al2024/SiC composite produced by multi-pass friction stir processing
Davood Ghanbari et al.
MEASUREMENT (2017)
Effect of welding heat input and post-weld aging time on microstructure and mechanical properties in dissimilar friction stir welded AA7075-AA5086
Jamshidi Aval Hamed
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)
Microstructures and hardness of stir zone for friction stir processed and post-processed heat treatment 7B04-O aluminium alloy
Y. Chen et al.
7TH INTERNATIONAL CONFERENCE ON NANOMATERIALS BY SEVERE PLASTIC DEFORMATION (2017)
Effect of cyclic solution treatment on microstructure and mechanical properties of friction stir welded 7075 Al alloy
S. M. Bayazid et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The influence of heat treatment on microstructure and wear properties of friction stir welded AA6061-T6/Al2O3 nanocomposite joint at four different traveling speed
M. Farahmand Nikoo et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
Friction stir welding of Al-Mg-Li 1424 alloy
Harpreet Sidhar et al.
MATERIALS & DESIGN (2016)
Microstructure distribution in an AA2050 T34 friction stir weld and its evolution during post-welding heat treatment
B. Malard et al.
ACTA MATERIALIA (2015)
Thermal stability of aluminum after friction stir processing with SiC nanoparticles
M. Sarkari Khorrami et al.
MATERIALS & DESIGN (2015)
The effect of postprocessing on tensile property and microstructure evolution of friction stir welding aluminum alloy joint
Z. L. Hu et al.
MATERIALS CHARACTERIZATION (2015)
Effect of welding heat input and post-welded heat treatment on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy
Yu Chen et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
The effects of nanosized particles on microstructural evolution of an in-situ TiB2/6063Al composite produced by friction stir processing
Z. Chen et al.
MATERIALS & DESIGN (2015)
Microstructure, mechanical and corrosion behavior of high strength AA7075 aluminium alloy friction stir welds - Effect of post weld heat treatment
P. Vijaya Kumar et al.
DEFENCE TECHNOLOGY (2015)
Microstructure and pitting corrosion of armor grade AA7075 aluminum alloy friction stir weld nugget zone - Effect of post weld heat treatment and addition of boron carbide
P. Vijaya Kumar et al.
DEFENCE TECHNOLOGY (2015)
Effects of temper condition and post weld heat treatment on the microstructure and mechanical properties of friction stir butt-welded AA7075 Al alloy plates
Guven Ipekoglu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Investigation into the Influence of Post-Weld Heat Treatment on the Friction Stir Welded AA6061 Al-Alloy Plates with Different Temper Conditions
Guven Ipekoglu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Effects of Initial Temper Condition and Postweld Heat Treatment on the Properties of Dissimilar Friction-Stir-Welded Joints between AA7075 and AA6061 Aluminum Alloys
Guven Ipekoglu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Effect of post weld heat treatment on tensile properties and microstructure characteristics of friction stir welded armour grade AA7075-T651 aluminium alloy
P. Sivaraj et al.
DEFENCE TECHNOLOGY (2014)
Effect of Heat Treatment T6 on the Friction Stir Welded SSM 6061 Aluminum Alloys
Worapong Boonchouytan et al.
11TH ECO-ENERGY AND MATERIALS SCIENCE AND ENGINEERING (11TH EMSES) (2014)
Characterisation and understanding of the corrosion behaviour of the nugget in a 2050 aluminium alloy Friction Stir Welding joint
Vincent Proton et al.
CORROSION SCIENCE (2013)
Microstructure and mechanical properties of friction stir welded 6082 AA in as welded and post weld heat treated conditions
Ehab A. El-Danaf et al.
MATERIALS & DESIGN (2013)
Effect of post-processing heat treatment on microstructure and microhardness of water-submerged friction stir processed 2219-T6 aluminum alloy
H. J. Liu et al.
MATERIALS & DESIGN (2013)
Effect of post weld heat treatments on microstructure and mechanical properties of friction stir welded joints of Al-Zn-Mg alloy AA7039
Chaitanya Sharma et al.
MATERIALS & DESIGN (2013)
Friction stir welding of SiCp/2009Al composite plate
D. Wang et al.
MATERIALS & DESIGN (2013)
Formability and microstructural stability of friction stir welded Al alloy tube during subsequent spinning and post weld heat treatment
S. J. Yuan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Influence of Post-Welding Heat Treatment on the Corrosion Behavior of a 2050-T3 Aluminum-Copper-Lithium Alloy Friction Stir Welding Joint
Vincent Proton et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)
Effect of post-weld heat treatment on the microstructure and plastic deformation behavior of friction stir welded 2024
Zhili Hu et al.
MATERIALS & DESIGN (2011)
The microstructure and mechanical properties of friction stir welded Al-Zn-Mg alloy in as welded and heat treated conditions
R. K. R. Singh et al.
MATERIALS & DESIGN (2011)
The Mechanism of Grain Coarsening in Friction-Stir-Welded AA5083 after Heat Treatment
Ke Chen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Improving the tribological characteristics of aluminum 6061 alloy by surface compositing with sub-micro-size ceramic particles via friction stir processing
Jun Qu et al.
WEAR (2011)
The effect of post-weld heat treatment on the mechanical properties of 2024-T4 friction stir-welded joints
Hakan Aydin et al.
MATERIALS & DESIGN (2010)
Microstructure and mechanical properties of friction stir welded AA6063-B4C metal matrix composites
X-G. Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Effect of post weld heat treatment on the microstructure and tensile properties of dissimilar friction stir welded AA 2219 and AA 6061 alloys
R. Priya et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2009)
Microstructure and mechanical property correlations in AA 6061 aluminium alloy friction stir welds
G. Madhusudhan Reddy et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2009)
Influences of post-weld heat treatment on tensile properties of friction stir-welded AA6061 aluminum alloy joints
K. Elangovan et al.
MATERIALS CHARACTERIZATION (2008)
Microstructural properties of friction stir welded and post-weld heat-treated 7449 aluminium alloy thick plate
A. Sullivan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Grain growth phenomena in friction stir welded 1100 Al during post-weld heat treatment
Y. S. Sato et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2007)
Stability of the grain structure in 2219-O aluminum alloy friction stir welds during solution treatment
Y. C. Chen et al.
MATERIALS CHARACTERIZATION (2007)
Effect of friction stir processing on the microstructure of cast A356 aluminum
Z. Y. Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Effect of zigzag line on the mechanical properties of friction stir welded joints of an Al-Cu alloy
HJ Liu et al.
SCRIPTA MATERIALIA (2006)
On microstructural phenomena occurring in friction stir welding of aluminium alloys
A. Barcellona et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
A cast 7050 friction stir weld with scandium: microstructure, corrosion and environmental assisted cracking
CS Paglia et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Effect of multiple-pass friction stir processing on microstructure and tensile properties of a cast aluminum-silicon alloy
ZY Ma et al.
SCRIPTA MATERIALIA (2006)
Effect of heat treatment on tensile properties of friction stir welded joints of 2219-T6 aluminium alloy
HJ Liu et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
Effect of post-weld heat treatment on the mechanical properties of 2219-O friction stir welded joints
YC Chen et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Effects of post-weld heat treatment on microstructure and mechanical properties of friction stir welded joints of 2219-O aluminium alloy
JC Feng et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
Quantitative investigation of precipitation and mechanical behaviour for AA2024 friction stir welds
C Genevois et al.
ACTA MATERIALIA (2005)
Friction stir welding parameters: a tool for controlling abnormal grain growth during subsequent heat treatment
MM Attallah et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
TEM analysis of a friction stir-welded butt joint of Al-Si-Mg alloys
M Cabibbo et al.
MATERIALS CHEMISTRY AND PHYSICS (2003)
Stability of nugget zone grain structures in high strength Al-alloy friction stir welds during solution treatment
KAA Hassan et al.
ACTA MATERIALIA (2003)
Characterization of a friction-stir-welded aluminum alloy 6013
B Heinz et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2002)
The effect of post weld heat treatment on the properties of 6061 friction stir welded joints
KN Krishnan
JOURNAL OF MATERIALS SCIENCE (2002)
Distribution of tensile property and microstructure in friction stir weld of 6063 aluminum
YS Sato et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
Share Paper
