Related references
Note: Only part of the references are listed.Hardened properties and durability of large-scale 3D printed cement-based materials
Yu Zhang et al.
MATERIALS AND STRUCTURES (2021)
Characterization of air-void systems in 3D printed cementitious materials using optical image scanning and X-ray computed tomography
Yu Chen et al.
MATERIALS CHARACTERIZATION (2021)
Mesh reinforcing method for 3D Concrete Printing
Taylor Marchment et al.
AUTOMATION IN CONSTRUCTION (2020)
Anisotropic behavior in bending of 3D printed concrete reinforced with fibers
Tao Ding et al.
COMPOSITE STRUCTURES (2020)
Mechanical behavior of 3D printed mortar with recycled sand at early ages
Tao Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Steel fibres reinforced 3D printed concrete: Influence of fibre sizes on mechanical performance
Luong Pham et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing
Yu Chen et al.
CEMENT & CONCRETE COMPOSITES (2020)
Influence of process parameters on the interlayer bond strength of concrete elements additive manufactured by Shotcrete 3D Printing (SC3DP)
Harald Kloft et al.
CEMENT AND CONCRETE RESEARCH (2020)
Hardened properties of layered 3D printed concrete with recycled sand
Tao Ding et al.
CEMENT & CONCRETE COMPOSITES (2020)
Aggregate-bed 3D concrete printing with cement paste binder
Shiwei Yu et al.
CEMENT AND CONCRETE RESEARCH (2020)
A review of X-ray computed tomography of concrete and asphalt construction materials
Anton du Plessis et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Method of Optimisation for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications
Shin Hau Bong et al.
MATERIALS (2019)
Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion
R. J. M. Wolfs et al.
CEMENT AND CONCRETE RESEARCH (2019)
Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing
Venkatesh Naidu Nerella et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
A 3D Printed Ready-Mixed Concrete Power Distribution Substation: Materials and Construction Technology
Guangchao Ji et al.
MATERIALS (2019)
Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification
Taylor Marchment et al.
MATERIALS & DESIGN (2019)
Weak bond strength between successive layers in extrusion-based additive manufacturing: measurement and physical origin
Emmanuel Keita et al.
CEMENT AND CONCRETE RESEARCH (2019)
Digital Concrete: A Review
Timothy Wangler et al.
CEMENT AND CONCRETE RESEARCH (2019)
Microstructural Characterization of 3D Printed Cementitious Materials
Jolien Van Der Putten et al.
MATERIALS (2019)
Development of 3D printable engineered cementitious composites with ultra-high tensile ductility for digital construction
Binrong Zhu et al.
MATERIALS & DESIGN (2019)
Time gap effect on bond strength of 3D-printed concrete
Yi Wei Daniel Tay et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
R. J. M. Wolfs et al.
CEMENT AND CONCRETE RESEARCH (2018)
Fresh properties of a novel 3D printing concrete ink
Yu Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model
Yiwei Weng et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of surface moisture on inter-layer strength of 3D printed concrete
Jay G. Sanjayan et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Methods of enhancing strength of geopolymer produced from powder-based 3D printing process
Ming Xia et al.
MATERIALS LETTERS (2018)
Measurement of tensile bond strength of 3D printed geopolymer mortar
Biranchi Panda et al.
MEASUREMENT (2018)
Mechanical characterization of 3D printed anisotropic cementitious material by the electromechanical transducer
Guowei Ma et al.
SMART MATERIALS AND STRUCTURES (2018)
Method for the Enhancement of Buildability and Bending Resistance of 3D Printable Tailing Mortar
Zhijian Li et al.
INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2018)
Vision of 3D printing with concrete - Technical, economic and environmental potentials
Geert De Schutter et al.
CEMENT AND CONCRETE RESEARCH (2018)
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Biranchi Panda et al.
MATERIALS LETTERS (2017)
Interlayer adhesion and strength of structures in Contour Crafting - Effects of aggregate size, extrusion rate, and layer thickness
Babak Zareiyan et al.
AUTOMATION IN CONSTRUCTION (2017)
Structural built-up of cement-based materials used for 3D-printing extrusion techniques
A. Perrot et al.
MATERIALS AND STRUCTURES (2016)
Large-scale 3D printing of ultra-high performance concrete - a new processing route for architects and builders
C. Gosselin et al.
MATERIALS & DESIGN (2016)
Method of formulating geopolymer for 3D printing for construction applications
Ming Xia et al.
MATERIALS & DESIGN (2016)
Enhancement of barrier properties of cement mortar with graphene nanoplatelet
Hongjian Du et al.
CEMENT AND CONCRETE RESEARCH (2015)
Complex concrete structures Merging existing casting techniques with digital fabrication
Ena Lloret et al.
COMPUTER-AIDED DESIGN (2015)
Mechanical properties of structures 3D printed with cementitious powders
Peng Feng et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
In-situ tracking of water transport in cement paste using X-ray computed tomography combined with CsCl enhancing
Lin Yang et al.
MATERIALS LETTERS (2015)
Hardened properties of high-performance printing concrete
T. T. Le et al.
CEMENT AND CONCRETE RESEARCH (2012)
Freeform construction: Mega-scale rapid manufacturing for construction
R. A. Buswell et al.
AUTOMATION IN CONSTRUCTION (2007)
Automated construction by contour crafting - related robotics and information technologies
B Khoshnevis
AUTOMATION IN CONSTRUCTION (2004)
Share Paper
