Related references
Note: Only part of the references are listed.Fresh and hardened properties of geopolymer binder using ground high magnesium ferronickel slag with fly ash
Jhutan Chandra Kuri et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Corrosion monitoring in steel bars using Laser ultrasonic guided waves and advanced signal processing
Subhra Majhi et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)
Spalling behavior of metakaolin-fly ash based geopolymer concrete under elevated temperature exposure
Hai Yan Zhang et al.
CEMENT & CONCRETE COMPOSITES (2020)
Elevated temperature, freezing-thawing and wetting-drying effects on polypropylene fiber reinforced metakaolin based geopolymer composites
Yurdakul Aygormez et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Sustainable use of ferronickel slag in cementitious composites and the effect on chloride penetration resistance
Yuning Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
High temperature resistance of fly ash/GGBFS-based geopolymer mortar with load-induced damage
Fulin Qu et al.
MATERIALS AND STRUCTURES (2020)
Factors affecting co-valorization of fayalitic and ferronickel slags for the production of alkali activated materials
Konstantinos Komnitsas et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2020)
A comparative study on geopolymers synthesized by different classes of fly ash after exposure to elevated temperatures
Xi Jiang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Effect of waste glass fine aggregate on the strength, durability and high temperature resistance of alkali-activated fly ash and GGBFS blended mortar
Md Nabi Newaz Khan et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Enhancing the recyclability of air-cooled high-magnesium ferronickel slag in cement-based materials: A study of assessing soundness through modifying method
Munan Zhai et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Thermal stability of one-part metakaolin geopolymer composites containing high volume of spodumene tailings and glass wool
Patrick N. Lemougna et al.
CEMENT & CONCRETE COMPOSITES (2020)
Leaching kinetics and reactivity evaluation of ferronickel slag in alkaline conditions
Ruilin Cao et al.
CEMENT AND CONCRETE RESEARCH (2020)
Effect of elevated temperatures on concrete incorporating ferronickel slag as fine aggregate
Ashish Kumer Saha et al.
FIRE AND MATERIALS (2019)
Sulfate resistance of steam cured ferronickel slag blended cement mortar
Baoliang Li et al.
CEMENT & CONCRETE COMPOSITES (2019)
Thermal properties and residual strength after high temperature exposure of cement mortar using ferronickel slag aggregate
Ashish Kumer Saha et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Thermal performance of an alkali-activated paste for bonding fibre sheets with concrete
Subhra Majhi et al.
COMPOSITES PART B-ENGINEERING (2019)
Feasibility of ferronickel slag powder for cementitious binder in concrete mix
Hansol Kim et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effect of High-Magnesium Nickel Slag on Hydration Characteristics of Portland Cement
Qisheng Wu et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)
Preparation of a geopolymer from red mud slurry and class F fly ash and its behavior at elevated temperatures
Zhaotong Yang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Corrosion detection in steel bar: A time-frequency approach
Subhra Majhi et al.
NDT & E INTERNATIONAL (2019)
The influence of steel slag and ferronickel slag on the properties of alkali-activated slag mortar
Nanqiao You et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Elevated temperature properties of basalt microfibril filled geopolymer composites
Promoda Behera et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Flexural behavior of hybrid PVA fibers reinforced ferrocement panels at elevated temperatures
N. F. Abushawashi et al.
FIRE AND MATERIALS (2018)
Value added utilization of by-product electric furnace ferronickel slag as construction materials: A review
Ashish Kumer Saha et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
TOPAS and TOPAS-Academic: an optimization program integrating computer algebra and crystallographic objects written in C plus
Alan A. Coelho
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2018)
High-temperature behavior and mechanical characteristics of boron waste additive metakaolin based geopolymer composites reinforced with synthetic fibers
Abdullah Celik et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Evaluation of alkali-activated blast furnace ferronickel slag as a cementitious material: Reaction mechanism, engineering properties and leaching behaviors
Dengquan Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Thermal resistance of fly ash based rubberized geopolymer concrete
Salmabanu Luhar et al.
JOURNAL OF BUILDING ENGINEERING (2018)
Characteristics and reactivity of ferronickel slag powder
Yiduo Huang et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Geopolymer with improved thermal stability by incorporating high-magnesium nickel slag
Tao Yang et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Waste glass as partial mineral precursor in alkali-activated slag/fly ash system
Shizhe Zhang et al.
CEMENT AND CONCRETE RESEARCH (2017)
Soundness and compressive strength of Portland cement blended with ground granulated ferronickel slag
Muhammad Ashiqur Rahman et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Compressive strength and microstructure of fly ash based geopolymer blended with silica fume under thermal cycle
Ping Duan et al.
CEMENT & CONCRETE COMPOSITES (2017)
Influence of binder composition on the gel structure in alkali activated fly ash/slag pastes exposed to elevated temperatures
N. K. Lee et al.
CERAMICS INTERNATIONAL (2017)
Physicochemical properties of binder gel in alkali-activated fly ash/slag exposed to high temperatures
S. M. Park et al.
CEMENT AND CONCRETE RESEARCH (2016)
Thermal stability of geopolymers used as supporting materials for TiO2 film coating through sol-gel process: Feasibility and improvement
Keren Zheng et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Thermal behavior and mechanical properties of geopolymer mortar after exposure to elevated temperatures
Hai Yan Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Valorization of construction and demolition (C&D) and industrial wastes through alkali activation
Dimitra Zaharaki et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Compressive behaviour of sodium and potassium activators synthetized fly ash geopolymer at elevated temperatures: A comparative study
Anwar Hosan et al.
JOURNAL OF BUILDING ENGINEERING (2016)
Use of OPC to improve setting and early strength properties of low calcium fly ash geopolymer concrete cured at room temperature
Pradip Nath et al.
CEMENT & CONCRETE COMPOSITES (2015)
Alkali-silica reactivity of cementitious materials using ferro-nickel slag fine aggregates produced in different cooling conditions
Young Cheol Choi et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Hydration study of ternary blended cements containing ferronickel slag and natural pozzolan
N. Lemonis et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Relationship between compressive strength and UPV of GGBFS based geopolymer mortars exposed to elevated temperatures
Sharmarke Abdi Omer et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Chemical interaction of water molecules with framework Al in acid zeolites: a periodic ab initio study on H-clinoptilolite
Karell Valdivies-Cruz et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)
Utilization of Ferronickel Slag as Additive in Portland Cement: A Hydration Leaching Study
N. S. Katsiotis et al.
WASTE AND BIOMASS VALORIZATION (2015)
Sodium-based fire resistant geopolymer for passive fire protection
K. Sakkas et al.
FIRE AND MATERIALS (2015)
Effect of elevated temperature on the properties of geopolymer synthesized from calcined ore-dressing tailing of bauxite and ground-granulated blast furnace slag
Jiayuan Ye et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Geopolymer prepared with high-magnesium nickel slag: Characterization of properties and microstructure
Tao Yang et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar under elevated temperatures
Navid Ranjbar et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Colour Change in Heated Concrete
Izabela Hager
FIRE TECHNOLOGY (2014)
Potassium based geopolymer for passive fire protection of concrete tunnels linings
K. Sakkas et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2014)
Utilisation of FeNi-Slag for the Production of Inorganic Polymeric Materials for Construction or for Passive Fire Protection
Konstantinos Sakkas et al.
WASTE AND BIOMASS VALORIZATION (2014)
Inorganic polymeric materials for passive fire protection of underground constructions
Konstantinos Sakkas et al.
FIRE AND MATERIALS (2013)
The influence of water absorption and porosity on the deterioration of cement paste and concrete exposed to elevated temperatures, as in a fire event
Alessandra Mendes et al.
CEMENT & CONCRETE COMPOSITES (2012)
Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag - Part II: Effect of Al2O3
M. Ben Haha et al.
CEMENT AND CONCRETE RESEARCH (2012)
Effect of elevated temperatures on geopolymer paste, mortar and concrete
Daniel L. Y. Kong et al.
CEMENT AND CONCRETE RESEARCH (2010)
Thermal Character of Geopolymers Synthesized from Class F Fly Ash Containing High Concentrations of Iron and alpha-Quartz
William D. A. Rickard et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2010)
Geopolymeric binders with different fine fillers - Phase transformations at high temperatures
Anja Buchwald et al.
APPLIED CLAY SCIENCE (2009)
Effect of synthesis parameters on the compressive strength of low-calcium ferronickel slag inorganic polymers
Kostas Komnitsas et al.
JOURNAL OF HAZARDOUS MATERIALS (2009)
Synthesis of ferronickel slag-based geopolymers
Ioannis Maragkos et al.
MINERALS ENGINEERING (2009)
Thermo-mechanical and microstructural characterisation of sodium-poly(sialate-siloxo) (Na-PSS) geopolymers
Arie van Riessen
JOURNAL OF MATERIALS SCIENCE (2007)
Geopolymerisation of low calcium ferronickel slags
K. Komnitsas et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Physical evolution of Na-geopolymer derived from metakaolin up to 1000°C
Peter Duxson et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing
T Bakharev
CEMENT AND CONCRETE RESEARCH (2006)
Assessment of fire damaged concrete using colour image analysis
NR Short et al.
CONSTRUCTION AND BUILDING MATERIALS (2001)