☆ 4.7 Article

Seismic behaviour of TSOBs bolted I-beam to hollow section square column connection with inner stiffener

JOURNAL OF BUILDING ENGINEERING (2022)

Related references

Note: Only part of the references are listed.

Article Construction & Building Technology

Seismic tests and nonlinear model of beam-CFDST column joints with blind fasteners

Jingfeng Wang et al.

Summary: The blind bolting technology was adopted for connecting CFDST column to beam, showing excellent seismic performance in pseudo-dynamic tests. Increasing the column hollow ratio and using extended end plate type can enhance the ultimate strength and stiffness of the joint.

JOURNAL OF BUILDING ENGINEERING (2022)

Add to Collection

Article Engineering, Civil

Seismic response on T-head square-neck one-side bolted endplate connection of beam to square tubular column

Lele Sun et al.

Summary: The seismic performance of T-head square-neck one-side bolted connections (TSOBCs) was evaluated in comparison to a standard double-sides bolted connection (SDBC) under cyclic load testing. Results showed that TSOBCs have higher rigidity, bending moment capacity, and energy dissipation capacity than SDBC. Strengthening measures such as endplate stiffener and concrete filling can significantly improve the performance of TSOBC, but may also affect the ductility coefficient of the joint.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Cyclic behavior of T-stub connection to hollow section steel column using TSOBs

Peijun Wang et al.

Summary: The study compared the performance of T-head Square-neck One-side Bolted Connections to Traditional High-strength Bolted Connections, finding that the one-side bolts showed differences in stiffness, bearing capacity, and ductility.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

Add to Collection

Article Construction & Building Technology

Numerical performance of blind-bolted demountable square CFST K-joints

Dengyiding Jin et al.

Summary: This paper introduces a novel design for demountable square concrete-filled steel tubular (CFST) K-joints, which use blind bolts and through-wall bolts as connectors to separate and reuse steel or composite components effectively. Research indicates that among various flush endplate designs and bolt arrangements, a design with through-bolt anchored beneath the tensile brace and a continuous flush endplate has advantages in material efficiency, joint strength and limiting endplate-chord separation.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Experimental studies on T-stub to hollow section column connection bolted by T-head square-neck one-side bolts under tension

Peijun Wang et al.

Summary: The novel T-head Square-neck One-side Bolt (TSOB) was tested in connecting T-stubs to Hollow Square Steel Tubes (HSST) and various failure modes were identified. Modifications to theoretical models were made to accurately calculate the bending yield strength of the connections, providing better design and performance evaluation for TSOBCs.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

Add to Collection

Article Construction & Building Technology

Experimental and theoretical modeling for predicting bending moment capacity of T-head square-neck one-side bolted endplate to tube column connection

Lele Sun et al.

Summary: One-side bolting technology is expected to play a crucial role in the bolted connection between H-beam and Hollow Section Steel Column (HSSC). A new type of T-head Squareneck One-side Bolt (TSOB) is proposed, which has simple construction and can adapt to rough installation manners. Experimental studies show that T-head Square-neck One-side Bolted Connections (TSOBCs) have superior bending performance compared to Standard Double-sides Bolted Connection (SDBC). Additionally, yield line patterns and analytical models for calculating bending bearing capacity are proposed.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Seismic behavior of thread-fixed one-side bolted endplate connection of steel beam to hollow square column

Boxun Zhang et al.

Summary: Experimental studies were conducted to investigate the seismic behavior of the Thread-fixed One-side Bolts bolted Endplate Connection (TOBEC) of a steel beam to a Hollow Square Column (HSC). Three forms of strengthening methods were applied to the TOBECs, including the infilled concrete of HSC, the small facing plates, and the big facing plate outside of HSC. Test results indicated that these strengthening methods could effectively improve the mechanical performance of TOBECs, satisfying rotation limitation requirements specified in both GB50011-2010 and FEMA-350, and potentially exceeding the performance of SNBECs.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Engineering, Civil

Cyclic behaviour of a novel steel beam-to-prefabricated CFST column connection with threaded sleeve bolts

H. Q. Liu et al.

Summary: The study focuses on a novel rigid and full-strength bolted connection of steel beam to prefabricated CFST column embedded with threaded sleeve bolts, investigating its cyclic behavior and seismic performance through experimental tests and analysis. The results show that the proposed connection details significantly influence the behavior and performance of the connections, with potential applications in engineering practice.

STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Hysteretic behavior of CFST column-steel beam bolted joints with external reinforcing diaphragm

Fa-xing Ding et al.

Summary: This study investigated concrete-filled steel tubular column-steel beam bolted joints with external reinforcing diaphragms using experimental and numerical methods. A new connection detailing and classification method for such joints were proposed, showing that they can be classified as semi-rigid joints.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

Add to Collection

Article Construction & Building Technology

A review and analysis of testing and modeling practice of extended Hollo-Bolt blind bolt connections

Manuela Cabrera et al.

Summary: Steel Hollow Sections (SHS) offer structural, economical, and architectural advantages in construction, but difficulties in site bolting have limited their applications. Blind bolts, such as the Extended Hollo-Bolt (EHB), have been developed to overcome these challenges and extend the use of SHS in moment resisting connections. The analysis shows that concrete strength and bolt grade are key design parameters influencing the strength and stiffness of the connection.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

Add to Collection

Article Engineering, Civil

Numerical study on the resistance of thread-fixed one-side bolts: Tensile and bearing strength

M. Latour et al.

Summary: Blind bolt systems have been proposed to address the difficulty of bolting access in steel structures, with TFOSBs being the simplest type. Research shows that TFOSBs have specific mechanical behaviors in tension and shear that need to be accounted for in design rules to ensure safety and reliability.

STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Experimental investigation on axial compression behavior of steel reinforced concrete columns with welded stirrups

Lele Sun et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Article Construction & Building Technology

Mechanical performance of novel steel one-sided bolted joints in shear

Chuqi Wan et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Cyclic Behavior of Anchored Blind-Bolted Extended End-Plate Joints to CFST Columns

Yihuan Wang et al.

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Seismic Behavior of a Novel Blind Bolted Flush End-Plate Connection to Strengthened Concrete-Filled Steel Tube Columns

Yihuan Wang et al.

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Article Engineering, Civil

Experimental studies on thread-fixed one-side bolted connection of beam to hollow square steel tube under static bending moment

Peijun Wang et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Article Construction & Building Technology

Behaviour of through plate connections to concrete-filled stainless steel columns

Md Kamrul Hassan et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)

Add to Collection

Article Construction & Building Technology

Studies on T-shaped one-side bolted connection to hollow section column under bending

Lele Sun et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)

Add to Collection

Article Engineering, Civil

Progressive collapse behaviour of endplate connections to cold-formed tubular column with novel Slip-Critical Blind Bolts

Wei Wang et al.

THIN-WALLED STRUCTURES (2018)

Add to Collection

Article Engineering, Civil

Tension strength and design method for thread-fixed one-side bolted T-stub

Mei Liu et al.

ENGINEERING STRUCTURES (2017)

Add to Collection

Article Construction & Building Technology

Behaviors of one-side bolted T-stub through thread holes under tension strengthened with backing plate

Xulin Zhu et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)

Add to Collection

Article Engineering, Civil

Yield and ultimate strengths determination of a blind bolted endplate connection to square hollow section column

Zhi-Yu Wang et al.

ENGINEERING STRUCTURES (2016)

Add to Collection

Article Engineering, Civil

Performance of practical beam-to-SHS column connections against progressive collapse

Wei Wang et al.

ENGINEERING STRUCTURES (2016)

Add to Collection

Article Engineering, Civil

Cyclic behaviour of novel blind bolted joints with different stiffening elements

Zhi-Bin Wang et al.

THIN-WALLED STRUCTURES (2016)

Add to Collection

Article Construction & Building Technology

Detailing of I-beam-to-CHS column joints with external diaphragm plates for seismic actions

Alireza Bagheri Sabbagh et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2013)

Add to Collection

Article Engineering, Civil

Inclined concrete-filled SHS steel column to steel beam joints under monotonic and cyclic loading: Experiments

Wei Li et al.

THIN-WALLED STRUCTURES (2013)

Add to Collection

Article Construction & Building Technology

Seismic behaviour of steel beam to circular CFST column assemblies with external diaphragms

Daxu Zhang et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.