Related references
Note: Only part of the references are listed.Fabrication and optimization of kaolin/stearic acid composite as a form-stable phase change material for application in the thermal energy storage systems
M. Jafaripour et al.
JOURNAL OF ENERGY STORAGE (2021)
Microstructural design and thermal characterization of composite diatomite-vermiculite paraffin-based form-stable PCM for cementitious mortars
Jose Airton Cunha Costa et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Experimental investigations on the thermal stability of Na2CO3-K2CO3 eutectic salt/ceramic composites for high temperature energy storage
Bao-rang Li et al.
RENEWABLE ENERGY (2020)
Application of environmental friendly and eutectic phase change materials for the efficiency enhancement of household freezers
L. Abdolmaleki et al.
RENEWABLE ENERGY (2020)
Managment of natural convection of nanofluids inside a square enclosure by different nano powder shapes in presence of Fins with different shapes and magnetic field effect
Shu-Rong Yan et al.
ADVANCED POWDER TECHNOLOGY (2020)
The Potential of Utilizing Buildings' Foundations as Thermal Energy Storage (TES) Units from Solar Plate Collectors
Lazaros Aresti et al.
ENERGIES (2020)
Effect of U-shaped absorber tube on thermal-hydraulic performance and efficiency of two-fluid parabolic solar collector containing two-phase hybrid non-Newtonian nanofluids
Shu-Rong Yan et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Production of renewable aromatics and heterocycles by catalytic pyrolysis of biomass resources using rhenium and tin promoted ZSM-5 zeolite catalysts
Shahin Shahsavari et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)
The rheological behavior of MWCNTs-ZnO/Water-Ethylene glycol hybrid non-Newtonian nanofluid by using of an experimental investigation
Shu-Rong Yan et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Sensitivity of adhesive and cohesive intermolecular forces to the incorporation of MWCNTs into liquid paraffin: Experimental study and modeling of surface tension
Shu-Rong Yan et al.
JOURNAL OF MOLECULAR LIQUIDS (2020)
Condensate blockage removal using microwave and ultrasonic waves: Discussion on rock mechanical and electrical properties
Saeed Karami et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2020)
Structural optimization of light-weight battery module based on hybrid liquid cooling with high latent heat PCM
Xiaoyu Wu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage
Sara Rostami et al.
ENERGY (2020)
Cu-metal organic frameworks (Cu-MOF) as an environment-friendly and economical catalyst for one pot synthesis of tacrine derivatives
Hoda Mollabagher et al.
RSC ADVANCES (2020)
Form-stable and thermally induced flexible composite phase change material for thermal energy storage and thermal management applications
Weixiong Wu et al.
APPLIED ENERGY (2019)
Advanced thermal systems driven by paraffin-based phase change materials - A review
Raza Gulfam et al.
APPLIED ENERGY (2019)
A comprehensive review on synthesis, stability, thermophysical properties, and characterization of nanofluids
Nurettin Sezer et al.
POWDER TECHNOLOGY (2019)
Energy management of a household refrigerator using eutectic environmental friendly PCMs in a cascaded condition
A. Pirvaram et al.
ENERGY (2019)
Effects of Pressure-Induced Density Changes in the Thermal Energy Absorbed by a Micro-Encapsulated Phase-Change Material
Ernesto M. Hernandez-Cooper et al.
MOLECULES (2019)
Experimental study on preparation of lauric acid/microwave-modified diatomite phase change material composites
Yeliz Konuklu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)
Investigation on the thermal performance of a high temperature packed bed thermal energy storage system containing carbonate salt based composite phase change materials
Chuan Li et al.
APPLIED ENERGY (2019)
Effect of sonication characteristics on stability, thermophysical properties, and heat transfer of nanofluids: A comprehensive review
Amin Asadi et al.
ULTRASONICS SONOCHEMISTRY (2019)
An experimental investigation to the thermal conductivity enhancement of paraffin wax as a phase change material using diamond nanoparticles as a promoting factor
S. M. Sadrameli et al.
HEAT AND MASS TRANSFER (2019)
A review of influence of nanoparticle synthesis and geometrical parameters on thermophysical properties and stability of nanofluids
A. Idrish Khan et al.
THERMAL SCIENCE AND ENGINEERING PROGRESS (2019)
Micro encapsulated & form-stable phase change materials for high temperature thermal energy storage
Guanghui Leng et al.
APPLIED ENERGY (2018)
Ca(NO3)(2)-NaNO3/expanded graphite composite as a novel shape-stable phase change material for mid- to high-temperature thermal energy storage
Yunxiu Ren et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Thermal conductivity of hybrid nanofluids: A critical review
Muhammad Usman Sajid et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
A comprehensive review of preparation, characterization, properties and stability of hybrid nanofluids
D. Dhinesh Kumar et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Experimental study on a novel form-stable phase change materials based on diatomite for solar energy storage
Zhonghao Rao et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)
Comparative study of two weir type cascade solar stills with and without PCM storage using energy and exergy analysis
Faramarz Sarhaddi et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Preparation and Characterization of KNO3/Diatomite Shape-Stabilized Composite Phase Change Material for High Temperature Thermal Energy Storage
Yong Deng et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)
Considerations for the use of metal alloys as phase change materials for high temperature applications
A. Ines Fernandez et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
High temperature ablation and thermo-physical properties improvement of carbon fiber reinforced composite using graphene oxide nanopowder
Samire Sabagh et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Microencapsulated phase change materials with high heat capacity and high cyclic durability for high-temperature thermal energy storage and transportation
Takahiro Nomura et al.
APPLIED ENERGY (2017)
Preparation and thermal properties of stearic acid/diatomite composites as form-stable phase change materials for thermal energy storage via direct impregnation method
Xiaowei Fu et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2016)
Thermal management of a LiFePO4 battery pack at high temperature environment using a composite of phase change materials and aluminum wire mesh plates
Y. Azizi et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Bound cleavage at carboxyl group-glycerol backbone position in thermal cracking of the triglycerides in sunflower oil
H. Seifi et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2016)
The effects of radiative heat transfer during the melting process of a high temperature phase change material confined in a spherical shell
Antonio Ramos Archibold et al.
APPLIED ENERGY (2015)
Preparation of paraffin/expanded vermiculite with enhanced thermal conductivity by implanting network carbon in vermiculite layers
Wei-min Guan et al.
CHEMICAL ENGINEERING JOURNAL (2015)
Diatomite: A promising natural candidate as carrier material for low, middle and high temperature phase change material
Tingting Qian et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Thermodynamic analysis of steam reforming of methane with statistical approaches
Farshad Farshchi Tabrizi et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Effects of operating conditions on selectivity of Fe-Co-Mn/MgO at high temperature CO hydrogenation
Hossein Atashi et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2015)
Development of a macro-micro kinetic model for CO hydrogenation over Co-Ni catalyst
M. Shiva et al.
KINETICS AND CATALYSIS (2015)
Sodium sulfate-diatomite composite materials for high temperature thermal energy storage
Yue Qin et al.
POWDER TECHNOLOGY (2015)
Key performance indicators in thermal energy storage: Survey and assessment
Luisa F. Cabeza et al.
RENEWABLE ENERGY (2015)
The preparation of a green shape-stabilized composite phase change material of polyethylene glycol/SiO2 with enhanced thermal performance based on oil shale ash via temperature-assisted sol-gel method
Tingting Qian et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)
Study on preparation and thermal properties of sodium nitrate/silica composite as shape-stabilized phase change material
Qiang Guo et al.
THERMOCHIMICA ACTA (2015)
Stearic acid hybridizing coal-series kaolin composite phase change material for thermal energy storage
Songyang Liu et al.
APPLIED CLAY SCIENCE (2014)
A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage (TES) medium
A. Jamekhorshid et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
Preparation and thermal properties of porous heterogeneous composite phase change materials based on molten salts/expanded graphite
Limin Zhong et al.
SOLAR ENERGY (2014)
Preparation, characterization and thermal properties of binary nitrate salts/expanded graphite as composite phase change material
Junbing Xiao et al.
THERMOCHIMICA ACTA (2014)
Development of high temperature phase-change-material storages
Doerte Laing et al.
APPLIED ENERGY (2013)
Evaluation of the potential of central receiver solar power plants: Configuration, optimization and trends
Antonio L. Avila-Marin et al.
APPLIED ENERGY (2013)
Paraffin/diatomite composite phase change material incorporated cement-based composite for thermal energy storage
Biwan Xu et al.
APPLIED ENERGY (2013)
Analysis of effecting factors on domestic refrigerators' energy consumption in use
Jasmin Geppert et al.
ENERGY CONVERSION AND MANAGEMENT (2013)
A novel method for purification of low grade diatomite powders in centrifugal fields
Zhiming Sun et al.
INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2013)
A review of studies on central receiver solar thermal power plants
Omar Behar et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
Composite material Mg(OH)2/vermiculite: A promising new candidate for storage of middle temperature heat
Alexandr Shkatulov et al.
ENERGY (2012)
Form-stable phase change materials for thermal energy storage
Murat M. Kenisarin et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)
Selection of materials for high temperature latent heat energy storage
Sameer Khare et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Process optimization design for jatropha-based biodiesel production using response surface methodology
H. V. Lee et al.
FUEL PROCESSING TECHNOLOGY (2011)
Review of solar cooling methods and thermal storage options
L. A. Chidambaram et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
Materials used as PCM in thermal energy storage in buildings: A review
L. F. Cabeza et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
Preparation of capric acid/halloysite nanotube composite as form-stable phase change material for thermal energy storage
Dandan Mei et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
State of the art on high temperature thermal energy storage for power generation. Part 1-Concepts, materials and modellization
Antoni Gil et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
High-temperature phase change materials for thermal energy storage
Murat M. Kenisarin
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
Impregnation of porous material with phase change material for thermal energy storage
Takahiro Nomura et al.
MATERIALS CHEMISTRY AND PHYSICS (2009)
Biodiesel production process optimization and characterization to assess the suitability of the product for varied environmental conditions
T. Eevera et al.
RENEWABLE ENERGY (2009)
Response surface optimization of biocatalytic biodiesel production with acid oil
Xin Chen et al.
BIOCHEMICAL ENGINEERING JOURNAL (2008)
Thermal reliability test of Al-34%Mg-6%Zn alloy as latent heat storage material and corrosion of metal with respect to thermal cycling
J. Q. Sun et al.
ENERGY CONVERSION AND MANAGEMENT (2007)
A review on phase change energy storage: materials and applications
MM Farid et al.
ENERGY CONVERSION AND MANAGEMENT (2004)