☆ 4.7 Article

Modeling for solidification of paraffin equipped with nanoparticles utilizing fins

JOURNAL OF ENERGY STORAGE (2022)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Heat transfer efficiency and electrical performance evaluation of photovoltaic unit under influence of NEPCM

Mohammadjavad Khodadadi et al.

Summary: In this study, the design of a PVT unit with phase change material (PCM) is analyzed to assess its efficiency under different concentrations of nanofluids and non-encapsulated phase change materials (NEPCMs). The effects of flow rates, solar radiation intensities, and multilayers of PCMs are also evaluated. Furthermore, a comparison study is conducted to assess the impact of integrating a thermoelectric (TE) module with the PVT system. The simulation is performed using the enthalpy-porosity approach and a transient solver with a pressure-based finite volume method. The results show that increasing the flow rate of coolant and the concentration of NEPCM can enhance the charging rate but may slightly decrease the temperature.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Thermodynamics

Modification for helical turbulator to augment heat transfer behavior of nanomaterial via numerical approach

M. Sheikholeslami et al.

Summary: In engineering fields, using tapes with various configurations can improve the efficiency of heat exchangers and address the current challenges of energy demand. Employing helical tapes can increase flow resistance but also enhance heat transfer efficiency and Nusselt number compared to traditional designs. By increasing tape width and Reynolds number, thermal irreversibility can be reduced, leading to improved system efficiency.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Nanofluid heat transfer within a pipe equipped with external device

Yinghong Qin

Summary: This study investigates the augmentation of turbulent intensity due to the installation of corrugated tapes, showing that the new fluid has better thermal characteristics than water. The parameters Sgen,f and Sgen,th are greatly affected by different variables, including irreversibility and Darcy factor.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Numerical simulation of effect of non-uniform solar irradiation on nanofluid turbulent flow

M. Sheikholeslami et al.

Summary: In current modeling, solar collectors are analyzed based on collector efficiency and irreversibility, while also taking into account variable solar irradiation. The best design should consider efficiency, irreversibility, and performance factor, with irreversibility decreasing with higher wind speeds and increasing with higher inlet temperatures. Additionally, frictional irreversibility increases with higher inlet temperatures.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Engineering, Chemical

Melting process of nanoparticle enhanced PCM through storage cylinder incorporating fins

Fanghua Li et al.

Summary: This paper discusses how the arrangement of fins can affect the charging process, utilizing a mixture of paraffin and copper oxide nanomaterial and exploring various configurations of fins with different positions, thicknesses, and lengths. Results show that using fins can reduce melting time, with fins on both inner and outer pipes improving efficiency, and finding the optimal fin style can achieve the best performance.

POWDER TECHNOLOGY (2021)

Add to Collection

Article Engineering, Aerospace

Aeroelastic model and analysis of an active camber morphing wing

Jiaying Zhang et al.

Summary: The study explores the aeroelastic characteristics and potential flutter risks of morphing camber wings, developing corresponding low-fidelity models. By comparing results from different aerodynamic models, flutter speeds can be effectively predicted.

AEROSPACE SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Engineering, Manufacturing

Semiempirical heat flux model of hard-brittle bone material in ductile microgrinding

Min Yang et al.

Summary: A semiempirical heat flux theoretical model based on the dynamic grinding force of hard-brittle bone ductile microgrinding is proposed to solve the calculation error problem in bone microgrinding temperature field. Experimental results show high consistency between theoretical calculations and actual measurements, with an average error of less than 7.7%. This model allows for precise control of temperature distribution during hard-brittle bone microgrinding processes through mechanical processing theory.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Recent progress on flat plate solar collectors and photovoltaic systems in the presence of nanofluid: A review

M. Sheikholeslami et al.

Summary: The current review provides empirical and numerical analyses of the thermal performance development in flat plate solar collectors (FPSCs), showing that utilizing nanofluids in PVT and thermal systems can increase both electrical and thermal energy outputs. Studies demonstrate a higher overall performance in FPSCs with the use of nanofluids, highlighting the potential benefits of incorporating nanofluids in solar energy systems.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Energy & Fuels

Optimal structure design of a PV/FC HRES using amended Water Strider Algorithm

Yi-Peng Xu et al.

Summary: A techno-economic study on an off-grid combined renewable energy system (HRES) has been proposed, utilizing the Amended Water Strider Algorithm (AWSA) to optimize the estimation of various components for cost reduction. The study considers loss of power supply probability (LPSP) and conducts sensitivity analysis and comparison with other algorithms to demonstrate the effectiveness of the proposed method.

ENERGY REPORTS (2021)

Add to Collection

Article Energy & Fuels

Optimal long-term prediction of Taiwan's transport energy by convolutional neural network and wildebeest herd optimizer

Shunyu Yao et al.

Summary: An optimized model based on CNN models combined with wildebeest herd optimization algorithm is proposed for transport energy forecasting in Taiwan. The predicted outcomes show that the demand for transport energy in Taiwan is not expected to increase excessively in 2020, while the gross domestic product is expected to increase significantly during the same period. These results align with ROC's green growth strategy, emphasizing the need for CO2 reduction.

ENERGY REPORTS (2021)

Add to Collection

Article Energy & Fuels

Model identification of the Proton Exchange Membrane Fuel Cells by Extreme Learning Machine and a developed version of Arithmetic Optimization Algorithm

Yi-Peng Xu et al.

Summary: This study aims to provide a proper approach for model identification of Proton Exchange Membrane Fuel Cells (PEMFCs) in different applications by introducing a modified version of the Extreme Learning Machine (ELM) model and a developed Arithmetic Optimization Algorithm (dAOA) to minimize errors between actual data and network output. Simulation results validate the superior performance of dAOA compared to AOA in accurately determining parameters for the PEMFC system.

ENERGY REPORTS (2021)

Add to Collection

Article Energy & Fuels

Numerical modeling of energy storage unit during freezing of paraffin utilizing Al2O3 nanoparticles and Y-shape fin

Yinghong Qin

Summary: This article numerically reports the freezing process inside an annulus zone filled with paraffin and nanoparticles. The exergy drop and freezing time were found to vary under different conditions.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection

Article Energy & Fuels

Techno-Economic Planning and Operation of the Microgrid Considering Real-Time Pricing Demand Response Program

Zi-Xuan Yu et al.

Summary: The study optimizes the grid-connected microgrids (MGs) by introducing real-time pricing (RTP) and demand response (DR) program, finding that the DR program has a positive impact on the technical, economic, and environmental aspects of MG, leading to a reduction in NPC and COE, component size, and carbon emissions.

ENERGIES (2021)

Add to Collection

Article Mathematics, Applied

CONCAVITY AND BOUNDS INVOLVING GENERALIZED ELLIPTIC INTEGRAL OF THE FIRST KIND

Tie-Hong Zhao et al.

Summary: The article provides a sufficient condition for a function to be strictly concave, generalizing recent results. New bounds are also presented for the function.

JOURNAL OF MATHEMATICAL INEQUALITIES (2021)

Add to Collection

Article Mathematics, Applied

Sharp Bounds for the Weighted Holder Mean of the Zero-Balanced Generalized Complete Elliptic Integrals

Tie-Hong Zhao et al.

Summary: The article presents the best bounds for the weighted Holder mean of zero-balanced generalized complete elliptic integrals, extending previous results for complete p-elliptic integrals.

COMPUTATIONAL METHODS AND FUNCTION THEORY (2021)

Add to Collection

Article Thermodynamics

Parametric evaluation of a hydrofoil-shaped sidewall rib-employed microchannel heat sink with and without nano-encapsulated phase change material slurry as coolant

M. Mohib Ur Rehman et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Thermodynamics

Optimization on the melting performance of triplex-layer PCMs in a horizontal finned shell and tube thermal energy storage unit

Hongtao Xu et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Acceleration of discharge process of clean energy storage unit with insertion of porous foam considering nanoparticle enhanced paraffin

M. Sheikholeslami et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Mathematics, Applied

New estimates considering the generalized proportional Hadamard fractional integral operators

Shuang-Shuang Zhou et al.

ADVANCES IN DIFFERENCE EQUATIONS (2020)

Add to Collection

Article Mathematics

SHARP BOUNDS FOR THE TOADER MEAN OF ORDER 3 IN TERMS OF ARITHMETIC, QUADRATIC AND CONTRAHARMONIC MEANS

Hong-Hu Chu et al.

MATHEMATICA SLOVACA (2020)

Add to Collection

Article Mathematics, Applied

New fractional approaches for n-polynomial P-convexity with applications in special function theory

Shu-Bo Chen et al.

ADVANCES IN DIFFERENCE EQUATIONS (2020)

Add to Collection

Article Energy & Fuels

Performance of ventilation system involving thermal storage unit considering porous media

Fanghua Li et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Article Chemistry, Physical

Nanoparticle enhanced PCM exergy loss and thermal behavior by means of FVM

Yu-Ming Chu et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Add to Collection

Article Chemistry, Physical

Influence of wavy enclosure and nanoparticles on heat release rate of PCM considering numerical study

Yu-Ming Chu et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Add to Collection

Article Mathematics, Applied

Integral inequalities via Raina's fractional integrals operator with respect to a monotone function

Shu-Bo Chen et al.

ADVANCES IN DIFFERENCE EQUATIONS (2020)

Add to Collection

Article Chemistry, Physical

Investigation of nano powders influence on melting process within a storage unit

Yu-Ming Chu et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Add to Collection

Article Mathematics, Applied

New Hermite-Hadamard type inequalities for exponentially convex functions and applications

Shuang-Shuang Zhou et al.

AIMS MATHEMATICS (2020)

Add to Collection

Article Mathematics, Applied

A new approach on fractional calculus and probability density function

Shu-Bo Chen et al.

AIMS MATHEMATICS (2020)

Add to Collection

Article Mathematics, Applied

On some refinements for inequalities involving zero-balanced hypergeometric function

Tie-Hong Zhao et al.

AIMS MATHEMATICS (2020)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Analysis of heat transfer mechanisms during energy storage in a vertical cylindrical unit filled with nano enhanced phase change material for free cooling applications

S. M. Shafee et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Add to Collection

Article Mathematics, Applied

A sharp double inequality involving generalized complete elliptic integral of the first kind

Tie-Hong Zhao et al.

AIMS MATHEMATICS (2020)

Add to Collection

Article Thermodynamics

Heat transfer behavior of nanoparticle enhanced PCM solidification through an enclosure with V shaped fins

M. Sheikholeslami et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Thermodynamics

Numerical modelling of a melting-solidification cycle of a phase-change material with complete or partial melting

Aina Rakotondrandisa et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2019)

Add to Collection

Article Thermodynamics

Melting phenomenon in a finned thermal storage system with graphene nano-plates for medium temperature applications

Rupinder Pal Singh et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Add to Collection

Article Thermodynamics

Can the melting behaviors of solid-liquid phase change be improved by inverting the partially thermal-active rectangular cavity?

Yuxiang Hong et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

Influence of CuO nanoparticles on heat transfer behavior of PCM in solidification process considering radiative source term

M. Sheikholeslami et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

Investigation of fin application effects on melting time in a latent thermal energy storage system with phase change material (PCM)

Adem Acir et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection

Article Engineering, Multidisciplinary

Numerical investigation on PCM melting in triangular cylinders

Amr Owes Elsayed

ALEXANDRIA ENGINEERING JOURNAL (2018)

Add to Collection

Article Chemistry, Physical

Influence of magnetic field on CNT-Polyethylene nanofluid flow over a permeable cylinder

P. Valipour et al.

JOURNAL OF MOLECULAR LIQUIDS (2017)

Add to Collection

Article Energy & Fuels

Heat transfer study of phase change materials with graphene nano particle for thermal energy storage

Karunesh Kant et al.

SOLAR ENERGY (2017)

Add to Collection

Article Energy & Fuels

Melting enhancement in triplex-tube latent heat energy storage system using nanoparticles-metal foam combination

Jasim M. Mahdi et al.

APPLIED ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon-Coated Porous Aluminum Foil Anode for High-Rate, Long-Term Cycling Stability, and High Energy Density Dual-Ion Batteries

Xuefeng Tong et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Thermodynamics

On the effect of eccentricity of a horizontal tube-in-shell storage unit on solidification of a PCM

Mustafa Yusuf Yazici et al.

APPLIED THERMAL ENGINEERING (2014)

Add to Collection

Review Construction & Building Technology

Phase change materials for building applications: A state-of-the-art review

Ruben Baetens et al.

ENERGY AND BUILDINGS (2010)

Add to Collection

Article Thermodynamics

Experimental and computational study of constrained melting of phase change materials (PCM) inside a spherical capsule

F. L. Tan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)

Add to Collection

Article Thermodynamics

Free-cooling of buildings with phase change materials

B Zalba et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.