4.7 Article

Effects of inorganic ions, organic particles, blood cells, and cyclic loading on in vitro corrosion of Mg -Al alloys

Related references

Note: Only part of the references are listed.
Article Metallurgy & Metallurgical Engineering

Superhydrophobic fluoride conversion coating on bioresorbable magnesium alloy - fabrication, characterization, degradation and cytocompatibility with BMSCs

Chunyan Zhang et al.

Summary: A superhydrophobic surface was prepared on fluoride-treated AZ31 alloy, showing higher barrier properties and corrosion resistance compared with other coatings. The coating also displayed non-toxicity to BMSC and enhanced cell proliferation, while inhibiting cell adhesion.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Metallurgy & Metallurgical Engineering

Microstructure and surface texture driven improvement in in-vitro response of laser surface processed AZ31B magnesium alloy

Tso-Chang Wu et al.

Summary: The study investigated the effects of laser surface melting on microstructure and surface topography evolution in AZ31B magnesium alloy, revealing that laser surface melting led to the formation of a refined microstructure and a progressively rougher surface. This resulted in improved wettability, corrosion resistance, and precipitation of mineral closer to hydroxyapatite in simulated body fluid for the samples treated with laser surface melting compared to untreated samples.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Metallurgy & Metallurgical Engineering

Microstructure and mechanical and corrosion properties of hot-extruded Mg-Zn-Ca-(Mn) biodegradable alloys

V. E. Bazhenov et al.

Summary: Biodegradable Mg-Zn-Ca-(Mn) alloys undergo grain refinement, increased strength, and decreased elongation during hot extrusion, with the addition of Mn significantly reducing the corrosion rate of the alloys, making them suitable for orthopedic implants.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Review Metallurgy & Metallurgical Engineering

Research advances in magnesium and magnesium alloys worldwide in 2020

Yan Yang et al.

Summary: Research on magnesium alloys remains a significant focus, with a strong emphasis on microstructure control, mechanical properties, corrosion and protection, and functional magnesium materials. Future research will concentrate on synergistic microstructure control, development of functional materials, corrosion protection measures, and advanced processing technology improvements.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Metallurgy & Metallurgical Engineering

In vitro and in vivo evaluations of Mg-Zn-Gd alloy membrane on guided bone regeneration for rabbit calvarial defect

Jiawen Si et al.

Summary: In this study, a biodegradable membrane with guided bone regeneration (GBR) was successfully developed using a Mg-2.0Zn-1.0Gd alloy (wt.%, MZG) membrane with Ca-P coating. The membrane demonstrated enhanced hydrophilicity, good cytocompatibility, excellent antibacterial effect, and improved new bone formation, indicating great potential for clinical application as GBR membranes.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Materials Science, Multidisciplinary

Influences of albumin on in vitro corrosion of pure Zn in artificial plasma

Lijun Liu et al.

CORROSION SCIENCE (2019)

Article Materials Science, Multidisciplinary

Exploring the effects of organic molecules on the degradation of magnesium under cell culture conditions

Rui-Qing Hou et al.

CORROSION SCIENCE (2018)

Article Engineering, Biomedical

Type 2 diabetes detection based on serum sample Raman spectroscopy

J. L. Gonzalez-Solis et al.

LASERS IN MEDICAL SCIENCE (2018)

Review Engineering, Biomedical

Magnesium degradation under physiological conditions - Best practice

Jorge Gonzalez et al.

BIOACTIVE MATERIALS (2018)

Article Biochemical Research Methods

Identification of individual red blood cells by Raman microspectroscopy for forensic purposes: in search of a limit of detection

Claire K. Muro et al.

ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2017)

Article Engineering, Biomedical

Stress corrosion cracking and corrosion fatigue characterisation of MgZn1Ca0.3 (ZX10) in a simulated physiological environment

Sajjad Jafari et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)

Review Materials Science, Multidisciplinary

Fundamentals and advances in magnesium alloy corrosion

M. Esmaily et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Review Instruments & Instrumentation

Raman Spectroscopy of Blood and Blood Components

Chad G. Atkins et al.

APPLIED SPECTROSCOPY (2017)

Article Cell & Tissue Engineering

IN VIVO AND IN VITRO DEGRADATION COMPARISON OF PURE MG, MG-10GD AND MG-2AG: A SHORT TERM STUDY

I. Marco et al.

EUROPEAN CELLS & MATERIALS (2017)

Article Engineering, Biomedical

Influence of MC3T3-E1 preosteoblast culture on the corrosion of a T6-treated AZ91 alloy

Emily K. Brooks et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2016)

Article Nanoscience & Nanotechnology

Cell Adhesion on Surface-Functionalized Magnesium

Victoria Wagener et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Materials Science, Biomaterials

Protective layer formation on magnesium in cell culture medium

V. Wagener et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

Article Materials Science, Biomaterials

Degradation testing of Mg alloys in Dulbecco's modified eagle medium: Influence of medium sterilization

Inigo Marco et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

Article Materials Science, Biomaterials

Magnesium degradation influenced by buffering salts in concentrations typical of in vitro and in vivo models

Nezha Ahmad Agha et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of AZ80-Ag alloy processed by hot ring rolling

Gang Zeng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Article Chemistry, Analytical

Differential-mode HEMT-based biosensor for real-time and label-free detection of C-reactive protein

Hee Ho Lee et al.

SENSORS AND ACTUATORS B-CHEMICAL (2016)

Review Engineering, Biomedical

Mg and Mg alloys: How comparable are in vitro and in vivo corrosion rates? A review

Adela Helvia Martinez Sanchez et al.

ACTA BIOMATERIALIA (2015)

Article Medical Laboratory Technology

Hematological Assessment in Pet Rabbits Blood Sample Collection and Blood Cell Identification

David M. Moore et al.

CLINICS IN LABORATORY MEDICINE (2015)

Article Materials Science, Multidisciplinary

The influence of pH on the corrosion rate of high-purity Mg, AZ91 and ZE41 in bicarbonate buffered Hanks' solution

Sean Johnston et al.

CORROSION SCIENCE (2015)

Review Mechanics

Corrosion fatigue fracture of magnesium alloys in bioimplant applications: A review

R. K. Singh Raman et al.

ENGINEERING FRACTURE MECHANICS (2015)

Article Chemistry, Physical

Protein interactions with corroding metal surfaces: comparison of Mg and Fe

Victoria Wagener et al.

FARADAY DISCUSSIONS (2015)

Article Chemistry, Physical

Effect of aging temperature on precipitation behavior and mechanical properties of extruded AZ80-Ag alloy

Shilun Yu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Article Chemistry, Physical

Protein interactions with corroding metal surfaces: comparison of Mg and Fe

Victoria Wagener et al.

FARADAY DISCUSSIONS (2015)

Article Biochemical Research Methods

NIR Raman spectra of whole human blood: effects of laser-induced and in vitro hemoglobin denaturation

P. Lemler et al.

ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2014)

Article Biochemistry & Molecular Biology

Effect of protein adsorption on the corrosion behavior of 70Cu-30Ni alloy in artificial seawater

Blanca E. Torres Bautista et al.

BIOELECTROCHEMISTRY (2014)

Article Chemistry, Multidisciplinary

Seawater-driven magnesium based Janus micromotors for environmental remediation

Wei Gao et al.

NANOSCALE (2013)

Review Engineering, Biomedical

Calcium phosphate coatings on magnesium alloys for biomedical applications: A review

Shaylin Shadanbaz et al.

ACTA BIOMATERIALIA (2012)

Article Materials Science, Multidisciplinary

Study of the in situ growth mechanism of Mg-Al hydrotalcite conversion film on AZ31 magnesium alloy

Jun Chen et al.

CORROSION SCIENCE (2012)

Article Engineering, Biomedical

Magnesium alloys: Predicting in vivo corrosion with in vitro immersion testing

Jemimah Walker et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2012)

Article Engineering, Biomedical

Chemical surface alteration of biodegradable magnesium exposed to corrosion media

Regine Willumeit et al.

ACTA BIOMATERIALIA (2011)

Article Materials Science, Multidisciplinary

In situ growth of Mg-Al hydrotalcite conversion film on AZ31 magnesium alloy

Jun Chen et al.

CORROSION SCIENCE (2011)

Article Engineering, Biomedical

Control of magnesium corrosion and biocompatibility with biomimetic coatings

Sigrid Keim et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2011)

Article Engineering, Biomedical

Corrosion of Mg alloy AZ91D in the presence of living cells

F. Seuss et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2011)

Article Materials Science, Multidisciplinary

In situ Raman spectroscopy investigation of bioactive glass reactivity: Simulated body fluid solution vs TRIS-buffered solution

D. Bellucci et al.

MATERIALS CHARACTERIZATION (2011)

Article Materials Science, Biomaterials

In vitro degradation behavior of M1A magnesium alloy in protein-containing simulated body fluid

Yongsheng Wang et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2011)

Article Materials Science, Coatings & Films

Hydroxyapatite coating of AZ31 magnesium alloy by a solution treatment and its corrosion behavior in NaCl solution

Sachiko Hiromoto et al.

SURFACE & COATINGS TECHNOLOGY (2011)

Review Engineering, Biomedical

Octacalcium phosphate: Osteoconductivity and crystal chemistry

O. Suzuki

ACTA BIOMATERIALIA (2010)

Article Biochemical Research Methods

Identification and differentiation of single cells from peripheral blood by Raman spectroscopic imaging

Ute Neugebauer et al.

JOURNAL OF BIOPHOTONICS (2010)

Article Engineering, Biomedical

Effect of surface pre-treatments on biocompatibility of magnesium

Carla Lorenz et al.

ACTA BIOMATERIALIA (2009)

Article Engineering, Biomedical

Composition of corrosion layers on a magnesium rare-earth alloy in simulated body fluids

Ralf Rettig et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2009)

Article Chemistry, Medicinal

CO2-Formatics: How Do Proteins Bind Carbon Dioxide?

Thomas R. Cundari et al.

JOURNAL OF CHEMICAL INFORMATION AND MODELING (2009)

Article Materials Science, Biomaterials

In vitro degradation, hemolysis and MC3T3-E1 cell adhesion of biodegradable Mg-Zn alloy

Shaoxiang Zhang et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2009)

Article Materials Science, Multidisciplinary

Progress and challenge for magnesium alloys as biomaterials

Rongchang Zeng et al.

ADVANCED ENGINEERING MATERIALS (2008)

Article Materials Science, Multidisciplinary

Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE41

Ming-Chun Zhao et al.

CORROSION SCIENCE (2008)

Article Engineering, Biomedical

Time-dependent electrochemical characterization of the corrosion of a magnesium rare-earth alloy in simulated body fluids

Ralf Rettig et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)

Article Materials Science, Multidisciplinary

In vitro transformation of OCP into carbonated HA under physiological conditions

Renata Horvathova et al.

MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2008)

Article Materials Science, Multidisciplinary

Degradation susceptibility of surgical magnesium alloy in artificial biological fluid containing albumin

Chenglong Liu et al.

JOURNAL OF MATERIALS RESEARCH (2007)

Review Engineering, Biomedical

Coronary stents: A materials perspective

Gopinath Mani et al.

BIOMATERIALS (2007)

Article Engineering, Biomedical

In vitro and in vivo corrosion measurements of magnesium alloys

F Witte et al.

BIOMATERIALS (2006)

Review Engineering, Biomedical

Magnesium and its alloys as orthopedic biomaterials: A review

MP Staiger et al.

BIOMATERIALS (2006)

Article Engineering, Biomedical

In vivo corrosion of four magnesium alloys and the associated bone response

F Witte et al.

BIOMATERIALS (2005)

Article Materials Science, Coatings & Films

Evaluation of cyto-toxicity and corrosion behavior of alkali-heat-treated magnesium in simulated body fluid

LC Li et al.

SURFACE & COATINGS TECHNOLOGY (2004)

Article Materials Science, Multidisciplinary

Precipitation of magnesium apatite on pure magnesium surface during immersing in Hank's solution

H Kuwahara et al.

MATERIALS TRANSACTIONS (2001)