Related references
Note: Only part of the references are listed.Three-dimensional bioprinted hepatorganoids prolong survival of mice with liver failure
Huayu Yang et al.
GUT (2021)
Three-dimensional bio-printing of primary human hepatocellular carcinoma for personalized medicine
Feihu Xie et al.
BIOMATERIALS (2021)
3D Bioprinting of In Vitro Models Using Hydrogel-Based Bioinks
Yeong-Jin Choi et al.
POLYMERS (2021)
3D bioprinting of hepatocytes: core-shell structured co-cultures with fibroblasts for enhanced functionality
Rania Taymour et al.
SCIENTIFIC REPORTS (2021)
Bioink Formulations for Bone Tissue Regeneration
Na Li et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2021)
Light-Activated Decellularized Extracellular Matrix-Based Bioinks for Volumetric Tissue Analogs at the Centimeter Scale
Hyeonji Kim et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
Recent advances in bioprinting technologies for engineering hepatic tissue
Tarun Agarwal et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)
Upgrading Hepatic Differentiation and Functions on 3D Printed Silk-Decellularized Liver Hybrid Scaffolds
Aarushi Sharma et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2021)
Natural Biomaterials and Their Use as Bioinks for Printing Tissues
Claire Benwood et al.
BIOENGINEERING-BASEL (2021)
Recent advances in polysaccharide-based hydrogels for synthesis and applications
Zili Li et al.
AGGREGATE (2021)
Polymeric Bioinks for 3D Hepatic Printing
Joyita Sarkar et al.
CHEMISTRY-SWITZERLAND (2021)
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
David Chimene et al.
ADVANCED MATERIALS (2020)
Decellularized extracellular matrix-based bio-ink with enhanced 3D printability and mechanical properties
Min Kyeong Kim et al.
BIOFABRICATION (2020)
A Novel Plasma-Based Bioink Stimulates Cell Proliferation and Differentiation in Bioprinted, Mineralized Constructs
Tilman Ahlfeld et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Efficient myotube formation in 3D bioprinted tissue construct by biochemical and topographical cues
WonJin Kim et al.
BIOMATERIALS (2020)
Bioprinting of Multiscaled Hepatic Lobules within a Highly Vascularized Construct
Donggu Kang et al.
SMALL (2020)
Engineering and Functionalization of Gelatin Biomaterials: From Cell Culture to Medical Applications
Alvin Bacero Bello et al.
TISSUE ENGINEERING PART B-REVIEWS (2020)
Aspiration-assisted bioprinting for precise positioning of biologics
Bugra Ayan et al.
SCIENCE ADVANCES (2020)
Development of 3D bioprinting: From printing methods to biomedical applications
Zeming Gu et al.
ASIAN JOURNAL OF PHARMACEUTICAL SCIENCES (2020)
Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel-Based Bioinks
Xiaolin Cui et al.
ADVANCED HEALTHCARE MATERIALS (2020)
Fabrication of liver microtissue with liver decellularized extracellular matrix (dECM) bioink by digital light processing (DLP) bioprinting
Qijiang Mao et al.
Materials Science & Engineering C-Materials for Biological Applications (2020)
Extrusion and Microfluidic-Based Bioprinting to Fabricate Biomimetic Tissues and Organs
Elham Davoodi et al.
ADVANCED MATERIALS TECHNOLOGIES (2020)
Advancing bioinks for 3D bioprinting using reactive fillers: A review
Susanne Heid et al.
ACTA BIOMATERIALIA (2020)
High-Resolution 3D Bioprinting of Photo-Cross-linkable Recombinant Collagen to Serve Tissue Engineering Applications
Liesbeth Tytgat et al.
BIOMACROMOLECULES (2020)
Printability and Shape Fidelity of Bioinks in 3D Bioprinting
Andrea Schwab et al.
CHEMICAL REVIEWS (2020)
Designing Decellularized Extracellular Matrix-Based Bioinks for 3D Bioprinting
Alperen Abaci et al.
ADVANCED HEALTHCARE MATERIALS (2020)
Current Advances on 3D-Bioprinted Liver Tissue Models
Liang Ma et al.
ADVANCED HEALTHCARE MATERIALS (2020)
3D bioprinting of bicellular liver lobule-mimetic structures via microextrusion of cellulose nanocrystal-incorporated shear-thinning bioink
Yun Wu et al.
SCIENTIFIC REPORTS (2020)
Engineered Collagen Matrices
Vaidehi A. Patil et al.
BIOENGINEERING-BASEL (2020)
Recent advances and challenges in materials for 3D bioprinting
Hongli Mao et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2020)
Bioprinting of patient-derivedin vitrointrahepatic cholangiocarcinoma tumor model: establishment, evaluation and anti-cancer drug testing
Shuangshuang Mao et al.
BIOFABRICATION (2020)
Formulation and Characterization of Alginate Dialdehyde, Gelatin, and Platelet-Rich Plasma-Based Bioink for Bioprinting Applications
Lakshmi T. Somasekharan et al.
BIOENGINEERING-BASEL (2020)
Scanningless and continuous 3D bioprinting of human tissues with decellularized extracellular matrix
Claire Yu et al.
BIOMATERIALS (2019)
Photochemically crosslinked cell-laden methacrylated collagen hydrogels with high cell viability and functionality
Thuy-Uyen Nguyen et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2019)
3D Bioprinting of Functional Islets of Langerhans in an Alginate/Methylcellulose Hydrogel Blend
Sarah Duin et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Decellularized extracellular matrix bioinks and the external stimuli to enhance cardiac tissue development in vitro
Sanskrita Das et al.
ACTA BIOMATERIALIA (2019)
3D Primary Hepatocyte Culture Systems for Analyses of Liver Diseases, Drug Metabolism, and Toxicity: Emerging Culture Paradigms and Applications
Volker M. Lauschke et al.
BIOTECHNOLOGY JOURNAL (2019)
Corneal bioprinting utilizing collagen-based bioinks and primary human keratocytes
Daniela F. Duarte Campos et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2019)
Multicellular Co-Culture in Three-Dimensional Gelatin Methacryloyl Hydrogels for Liver Tissue Engineering
Juan Cui et al.
MOLECULES (2019)
The cell in the ink: Improving biofabrication by printing stem cells for skeletal regenerative medicine
G. Cidonio et al.
BIOMATERIALS (2019)
Liver Tissue Engineering: Challenges and Opportunities
Tarun Agarwal et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Use of Anionic Polysaccharides in the Development of 3D Bioprinting Technology
Chia Tai et al.
APPLIED SCIENCES-BASEL (2019)
Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels
Mark A. Skylar-Scott et al.
SCIENCE ADVANCES (2019)
The impact of decellularization methods on extracellular matrix derived hydrogels
Julia Fernandez-Perez et al.
SCIENTIFIC REPORTS (2019)
Responsive Inverse Opal Scaffolds with Biomimetic Enrichment Capability for Cell Culture
Changmin Shao et al.
RESEARCH (2019)
Directed differential behaviors of multipotent adult stem cells from decellularized tissue/organ extracellular matrix bioinks
Wonil Han et al.
BIOMATERIALS (2019)
Recent Strategies in Extrusion-Based Three-Dimensional Cell Printing toward Organ Biofabrication
Ge Gao et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Cell-printed 3D liver-on-a-chip possessing a liver microenvironment and biliary system
Hyungseok Lee et al.
BIOFABRICATION (2019)
Optimization of collagen type I-hyaluronan hybrid bioink for 3D bioprinted liver microenvironments
Andrea Mazzocchi et al.
BIOFABRICATION (2019)
A definition of bioinks and their distinction from biomaterial inks
J. Groll et al.
BIOFABRICATION (2019)
Hydrogels for Liver Tissue Engineering
Shicheng Ye et al.
BIOENGINEERING-BASEL (2019)
3D-printed gelatin scaffolds of differing pore geometry modulate hepatocyte function and gene expression
Phillip L. Lewis et al.
ACTA BIOMATERIALIA (2018)
Biomaterials-based 3D cell printing for next-generation therapeutics and diagnostics
Jinah Jang et al.
BIOMATERIALS (2018)
Progress in scaffold-free bioprinting for cardiovascular medicine
Nicanor I. Moldovan
JOURNAL OF CELLULAR AND MOLECULAR MEDICINE (2018)
Three-Dimensional Bioprinting of Hepatic Structures with Directly Converted Hepatocyte-Like Cells
Kyojin Kang et al.
TISSUE ENGINEERING PART A (2018)
Organ-Derived Decellularized Extracellular Matrix: A Game Changer for Bioink Manufacturing?
Deepak Choudhury et al.
TRENDS IN BIOTECHNOLOGY (2018)
Bioprinting Perfusion-Enabled Liver Equivalents for Advanced Organ-on-a-Chip Applications
Tobias Grix et al.
GENES (2018)
Rapid 3D bioprinting of decellularized extracellular matrix with regionally varied mechanical properties and biomimetic microarchitecture
Xuanyi Ma et al.
BIOMATERIALS (2018)
Generation of a 3D Liver Model Comprising Human Extracellular Matrix in an Alginate/Gelatin-Based Bioink by Extrusion Bioprinting for Infection and Transduction Studies
Thomas Hiller et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2018)
Perfused Organ Cell-Dense Macrotissues Assembled from Prefabricated Living Microtissues
Blanche C. Ip et al.
ADVANCED BIOSYSTEMS (2018)
Three-dimensional plotting of a cell-laden alginate/methylcellulose blend: towards biofabrication of tissue engineering constructs with clinically relevant dimensions
Kathleen Schuetz et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2017)
Long-term liver-specific functions of hepatocytes in electrospun chitosan nanofiber scaffolds coated with fibronectin
Divya Rajendran et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2017)
Three-dimensional bioprinting of volumetric tissues and organs
David Kilian et al.
MRS BULLETIN (2017)
'Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State-of-the-Art
Stuart Kyle et al.
ADVANCED HEALTHCARE MATERIALS (2017)
A highly printable and biocompatible hydrogel composite for direct printing of soft and perfusable vasculature-like structures
Ratima Suntornnond et al.
SCIENTIFIC REPORTS (2017)
Cross-Linked Hydrogel for Pharmaceutical Applications: A Review
Rabinarayan Parhi
ADVANCED PHARMACEUTICAL BULLETIN (2017)
Tissue Engineered Bio-Blood-Vessels Constructed Using a Tissue-Specific Bioink and 3D Coaxial Cell Printing Technique: A Novel Therapy for Ischemic Disease
Ge Gao et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Colloidal templating of highly ordered gelatin methacryloyl-based hydrogel platforms for three-dimensional tissue analogues
Bae Hoon Lee et al.
NPG ASIA MATERIALS (2017)
Development of Liver Decellularized Extracellular Matrix Bioink for Three-Dimensional Cell Printing-Based Liver Tissue Engineering
Hyungseok Lee et al.
BIOMACROMOLECULES (2017)
3D printed complex tissue construct using stem cell-laden decellularized extracellular matrix bioinks for cardiac repair
Jinah Jang et al.
BIOMATERIALS (2017)
Microfl uidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low-Viscosity Bioink
Cristina Colosi et al.
ADVANCED MATERIALS (2016)
Tailoring mechanical properties of decellularized extracellular matrix bioink by vitamin B2-induced photo-crosslinking
Jinah Jang et al.
ACTA BIOMATERIALIA (2016)
Advanced Bioinks for 3D Printing: A Materials Science Perspective
David Chimene et al.
ANNALS OF BIOMEDICAL ENGINEERING (2016)
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Weitao Jia et al.
BIOMATERIALS (2016)
3D printing of functional biomaterials for tissue engineering
Wei Zhu et al.
CURRENT OPINION IN BIOTECHNOLOGY (2016)
Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting
Xuanyi Ma et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Three-dimensional bioprinting of thick vascularized tissues
David B. Kolesky et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Current advances in three-dimensional tissue/organ printing
Jeong Hun Park et al.
TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2016)
Methods of synthesis of hydrogels ... A review
Muhammad Faheem Akhtar et al.
SAUDI PHARMACEUTICAL JOURNAL (2016)
Current advances in three-dimensional tissue/organ printing
Jeong Hun Park et al.
TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2016)
New Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks
Khoon S. Lim et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D Printed Tissue Models: Present and Future
Jinah Jang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
New Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks
Khoon S. Lim et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D Printed Tissue Models: Present and Future
Jinah Jang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
ECM proteins in a microporous scaffold influence hepatocyte morphology, function, and gene expression
Yan Wang et al.
SCIENTIFIC REPORTS (2016)
A liver-on-a-chip platform with bioprinted hepatic spheroids
Nupura S. Bhise et al.
BIOFABRICATION (2016)
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Kan Yue et al.
BIOMATERIALS (2015)
Methods of tissue decellularization used for preparation of biologic scaffolds and in vivo relevance
Timothy J. Keane et al.
METHODS (2015)
Role of three-dimensional matrix stiffness in regulating the chemoresistance of hepatocellular carcinoma cells
Chang Liu et al.
BIOTECHNOLOGY AND APPLIED BIOCHEMISTRY (2015)
Bioprinting of human pluripotent stem cells and their directed differentiation into hepatocyte-like cells for the generation of mini-livers in 3D
Alan Faulkner-Jones et al.
BIOFABRICATION (2015)
Three-Dimensional Cell Culture Systems and Their Applications in Drug Discovery and Cell-Based Biosensors
Rasheena Edmondson et al.
ASSAY AND DRUG DEVELOPMENT TECHNOLOGIES (2014)
Bioprinting technology and its applications
Young-Joon Seol et al.
EUROPEAN JOURNAL OF CARDIO-THORACIC SURGERY (2014)
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Falguni Pati et al.
NATURE COMMUNICATIONS (2014)
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Jos Malda et al.
ADVANCED MATERIALS (2013)
Metre-long cell-laden microfibres exhibit tissue morphologies and functions
Hiroaki Onoe et al.
NATURE MATERIALS (2013)
Three-Dimensional Human Tissue Chips Fabricated by Rapid and Automatic Inkjet Cell Printing
Michiya Matsusaki et al.
ADVANCED HEALTHCARE MATERIALS (2013)
Microenvironment of alginate-based microcapsules for cell culture and tissue engineering
Xiaobo Huang et al.
JOURNAL OF BIOSCIENCE AND BIOENGINEERING (2012)
Next Generation Nerve Guides: Materials, Fabrication, Growth Factors, and Cell Delivery
Juliet H. A. Bell et al.
TISSUE ENGINEERING PART B-REVIEWS (2012)
An overview of tissue and whole organ decellularization processes
Peter M. Crapo et al.
BIOMATERIALS (2011)
Bioprinting cell-laden matrigel for radioprotection study of liver by pro-drug conversion in a dual-tissue microfluidic chip
J. E. Snyder et al.
BIOFABRICATION (2011)
The use of decellularized adipose tissue to provide an inductive microenvironment for the adipogenic differentiation of human adipose-derived stem cells
L. E. Flynn
BIOMATERIALS (2010)
Maintenance of Human Hepatocyte Function In Vitro by Liver-Derived Extracellular Matrix Gels
Tiffany L. Sellaro et al.
TISSUE ENGINEERING PART A (2010)
Preparation of chitosan-gelatin hybrid scaffolds with well-organized microstructures for hepatic tissue engineering
He Jiankang et al.
ACTA BIOMATERIALIA (2009)
Control of Stem Cell Fate by Physical Interactions with the Extracellular Matrix
Farshid Guilak et al.
CELL STEM CELL (2009)
Three-dimensional Huh7 cell culture system for the study of Hepatitis C virus infection
Bruno Sainz et al.
VIROLOGY JOURNAL (2009)
Matrix elasticity directs stem cell lineage specification
Adam J. Engler et al.
CELL (2006)
Chitosan/gelatin composite microcarrier for hepatocyte culture
KG Li et al.
BIOTECHNOLOGY LETTERS (2004)
Photocrosslinked hyaluronic acid hydrogels: Natural, biodegradable tissue engineering scaffolds
JB Leach et al.
BIOTECHNOLOGY AND BIOENGINEERING (2003)
Culture of hepatocytes on fructose-modified chitosan scaffolds
JL Li et al.
BIOMATERIALS (2003)
Decoupling the dependence of rheological/mechanical properties of hydrogels from solids concentration
HJ Kong et al.
POLYMER (2002)
Hydrogels for tissue engineering
KY Lee et al.
CHEMICAL REVIEWS (2001)
Controlling mechanical and swelling properties of alginate hydrogels independently by cross-linker type and cross-linking density
KY Lee et al.
MACROMOLECULES (2000)
Share Paper
