Related references
Note: Only part of the references are listed.Facile fabrication of microlenses with controlled geometrical characteristics by inkjet printing on nanostructured surfaces prepared by combustion chemical vapour deposition
Jorge Alaman et al.
APPLIED SURFACE SCIENCE (2020)
Curing behavior of a UV-curable inkjet ink: Distinction between surface-cure and deep-cure performance
Jonas Simon et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Recent advances and prospects of inkjet printing in heterogeneous catalysis
Hesam Maleki et al.
CATALYSIS SCIENCE & TECHNOLOGY (2020)
Influence of Al2O3 Nanoparticle Addition on a UV Cured Polyacrylate for 3D Inkjet Printing
Dennis Graf et al.
POLYMERS (2019)
Ultrafast Three-Dimensional Printing of Optically Smooth Microlens Arrays by Oscillation-Assisted Digital Light Processing
Chao Yuan et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
State-of-the-Art and Future Challenges of UV Curable Polymer-Based Smart Materials for Printing Technologies
Cristian Mendes-Felipe et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Implementation of Integrated VCSEL-Based Optical Feedback Interferometry Microfluidic Sensor System with Polymer Microoptics
Yu Zhao et al.
APPLIED SCIENCES-BASEL (2019)
Inkjet printing of microlens arrays on large, lithographic structured substrates
Erik Beckert et al.
ADVANCED FABRICATION TECHNOLOGIES FOR MICRO/NANO OPTICS AND PHOTONICS XII (2019)
Photopolymerization in 3D Printing
Ali Bagheri et al.
ACS APPLIED POLYMER MATERIALS (2019)
A review on inkjet printing of nanoparticle inks for flexible electronics
Laxmidhar Nayak et al.
JOURNAL OF MATERIALS CHEMISTRY C (2019)
Innovative design of reel-to-reel hot embossing system for production of plastic microlens array films
Chih-Yuan Chang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Effect of fused silica surface wettability on thermal reflow of polymer microlens arrays
D. Jucius et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2017)
UV-curable hybrid organic-inorganic composite inks with a high refractive index for printing interference images and holograms
Elena A. Eremeeva et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
Microlens fabrication by replica molding of frozen laser-printed droplets
Salvatore Surdo et al.
APPLIED SURFACE SCIENCE (2017)
Inkjet Printing of Functional Materials for Optical and Photonic Applications
Jorge Alaman et al.
MATERIALS (2016)
Tailoring optical and rheological properties of host-guest systems based on an epoxy acrylate
U. Gleissner et al.
MATERIALS TODAY-PROCEEDINGS (2016)
Fabricating optical lenses by inkjet printing and heat-assisted in situ curing of polydimethylsiloxane for smartphone microscopy
Yu-Lung Sung et al.
JOURNAL OF BIOMEDICAL OPTICS (2015)
Inkjet printing for biosensor fabrication: combining chemistry and technology for advanced manufacturing
Jia Li et al.
LAB ON A CHIP (2015)
Organic-inorganic-hybrid-polymer microlens arrays with tailored optical characteristics and multi-focal properties
Loic Jacot-Descombes et al.
OPTICS EXPRESS (2015)
Jet printing of convex and concave polymer micro-lenses
M. Blattmann et al.
OPTICS EXPRESS (2015)
Inkjet printing of 3D nano-composites formed by photopolymerization of an acrylate monomer
Casey Check et al.
REACTIVE & FUNCTIONAL POLYMERS (2015)
Effective increase in the refractive index of novel transparent silicone hybrid films by introduction of functionalized silicon nanoparticles
Guoyan Zhang et al.
RSC ADVANCES (2015)
Additive Manufacture of Ceramics Components by Inkjet Printing
Brian Derby
ENGINEERING (2015)
Layered polymer GRIN lenses and their benefits to optical designs
Andrew Boyd et al.
ADVANCED OPTICAL TECHNOLOGIES (2015)
Fabrication, characterization, and applications of microlenses
Tingxiu Hou et al.
APPLIED OPTICS (2015)
Ultralong focal length microlens array fabricated based on SU-8 photoresist
Rui Bian et al.
APPLIED OPTICS (2015)
Ionic liquids as performance additives for water-based printing inks
Zuzanna Zolek-Tryznowska et al.
COLORATION TECHNOLOGY (2014)
Fabrication method of low f-number microlens arrays by using surface coating and epoxy dispensing technology
Pei Li et al.
JOURNAL OF MICRO-NANOLITHOGRAPHY MEMS AND MOEMS (2014)
Tailoring the optical and rheological properties of an epoxy acrylate based host-guest system
Uwe Gleissner et al.
OPTICAL ENGINEERING (2014)
Large-scale high quality glass microlens arrays fabricated by laser enhanced wet etching
Siyu Tong et al.
OPTICS EXPRESS (2014)
Fabrication of concave spherical microlenses on silicon by femtosecond laser irradiation and mixed acid etching
An Pan et al.
OPTICS EXPRESS (2014)
Control of droplet formation by operating waveform for inks with various viscosities in piezoelectric inkjet printing
Yu-Feng Liu et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2013)
Direct fabrication of microlens arrays with high numerical aperture by ink-jetting on nanotextured surface
Yu Luo et al.
APPLIED SURFACE SCIENCE (2013)
Influence of UV-curing conditions on polymerization kinetics and gloss of urethane acrylate coatings
Viera Jancovicova et al.
PROGRESS IN ORGANIC COATINGS (2013)
Inkjet printed micro lens array on patterned substrate
P. Vilmi et al.
ADVANCED FABRICATION TECHNOLOGIES FOR MICRO/NANO OPTICS AND PHOTONICS VI (2013)
Directly fabricated multi-scale microlens arrays on a hydrophobic flat surface by a simple ink-jet printing technique
Joo Yeon Kim et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Fabrication of polymer micro-lens array with pneumatically diaphragm-driven drop-on-demand inkjet technology
Dan Xie et al.
OPTICS EXPRESS (2012)
Advances in cationic photopolymerization
Marco Sangermano
PURE AND APPLIED CHEMISTRY (2012)
New inks for the direct drop-on-demand fabrication of polymer lenses
A. Voigt et al.
MICROELECTRONIC ENGINEERING (2011)
Hybrid polymer microlens arrays with high numerical apertures fabricated using simple ink-jet printing technique
Joo Yeon Kim et al.
OPTICAL MATERIALS EXPRESS (2011)
Study on the Curing Kinetics of UV-curable Inkjet Ink
Ni Pingxiu et al.
PRINTING AND PACKAGING STUDY (2011)
Review of standards for microlenses and microlens arrays
R. Stevens et al.
IMAGING SCIENCE JOURNAL (2010)
Synthesis and property of 9,9′-spirobifluorene-containing aromatic polyesters as optical polymers with high refractive index and low birefringence
Ryota Seto et al.
POLYMER (2010)
Properties of Some Poly(siloxane)s for Optical Applications
Cristina Eliza Brunchi et al.
HIGH PERFORMANCE POLYMERS (2009)
Microlens Arrays by Direct-Writing Inkjet Print for LCD Backlighting Applications
Chun-Hao Tien et al.
JOURNAL OF DISPLAY TECHNOLOGY (2009)
High refractive index polymers: fundamental research and practical applications
Jin-gang Liu et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
High refractive index organic-inorganic nanocomposites: design, synthesis and application
Changli Lu et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Self-aligned hemispherical formation of microlenses from colloidal droplets on heterogeneous surfaces
Chin-Tai Chen et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Reduction of droplet volume by controlling actuating waveforms in inkjet printing for micro-pattern formation
H. Y. Gan et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Microlens array fabrication by enhanced thermal reflow process: Towards efficient collection of fluorescence light from microarrays
E. Roy et al.
MICROELECTRONIC ENGINEERING (2009)
Fabrication of spherical microlenses by a combination of isotropic wet etching of silicon and molding techniques
Jorge Albero et al.
OPTICS EXPRESS (2009)
Ultra-Low Shrinkage Hybrid Photosensitive Material for Two-Photon Polymerization Microfabrication
Aleksandr Ovsianikov et al.
ACS NANO (2008)
Nanoscale Patterns of Oligonucleotides Formed by Electrohydrodynamic Jet Printing with Applications in Biosensing and Nanomaterials Assembly
Jang-Ung Park et al.
NANO LETTERS (2008)
Replication of microlens arrays by gas-assisted hot embossing
H. Hocheng et al.
MATERIALS AND MANUFACTURING PROCESSES (2008)
Hot embossing of micro-lens array on bulk metallic glass
C. T. Pan et al.
SENSORS AND ACTUATORS A-PHYSICAL (2008)
Functional inorganic nanofillers for transparent polymers
H. Althues et al.
CHEMICAL SOCIETY REVIEWS (2007)
Ink-jet delivery of particle suspensions by piezoelectric droplet ejectors
N Reis et al.
JOURNAL OF APPLIED PHYSICS (2005)
Soft-lithography-enabled fabrication of large numerical aperture refractive microlens array in hybrid SiO2-TiO2 sol-gel glass -: art. no. 114102
XC Yuan et al.
APPLIED PHYSICS LETTERS (2005)
Inkjet printing of polymers: State of the art and future developments
BJ de Gans et al.
ADVANCED MATERIALS (2004)
UV-initiated free radical and cationic photopolymerizations of acrylate/ep oxide and acrylate/vinyl ether hybrid systems with and without photosensitizer
JD Cho et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Study of micro-droplet behavior for a piezoelectric inkjet printing device using a single pulse voltage pattern
HC Wu et al.
MATERIALS TRANSACTIONS (2004)
Low-cost, low-loss microlens arrays fabricated by soft-lithography replication process
MV Kunnavakkam et al.
APPLIED PHYSICS LETTERS (2003)
Microlens array produced using hot embossing process
NS Ong et al.
MICROELECTRONIC ENGINEERING (2002)
Ink-jet printed nanoparticle microelectromechanical systems
SB Fuller et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2002)
Ink-jet printing of wax-based alumina suspensions
KAM Seerden et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2001)
Deposition of optical microlens arrays by ink-jet processes
R Danzebrink et al.
THIN SOLID FILMS (2001)
Ink-jet fabrication of polymer microlens for optical-I/O chip packaging
Y Ishii et al.
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS (2000)
Share Paper
