Related references
Note: Only part of the references are listed.Evaluation of additive electron beam melting of haynes 282 alloy
K. A. Unocic et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Multimodal gamma ' precipitation in Inconel-738 Ni-based superalloy during electron-beam powder bed fusion additive manufacturing
Nima Haghdadi et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Mechanical behaviours and mass transport properties of bone-mimicking scaffolds consisted of gyroid structures manufactured using selective laser melting
Shuai Ma et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)
Atomic size effect of alloying elements on the formation, evolution and strengthening of γ'-Ni3Al precipitates in Ni-based superalloys
Rasim Eris et al.
INTERMETALLICS (2019)
Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys
Paraskevas Kontis et al.
ACTA MATERIALIA (2019)
Direct laser metal deposition of Inconel 738
A. Ramakrishnan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructure evolution of Inconel 738 fabricated by pulsed laser powder bed fusion
Jose Alberto Muniz-Lerma et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting
Edouard Chauvet et al.
ACTA MATERIALIA (2018)
Asymmetric Cracking in Mar-M247 Alloy Builds During Electron Beam Powder Bed Fusion Additive Manufacturing
Y. S. Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
High-temperature site preference and atomic short-range ordering characteristics of ternary alloying elements in γ′-Ni3Al intermetallics
Rasim Eris et al.
PHILOSOPHICAL MAGAZINE (2017)
Crystallographic texture control of beta-type Ti-15Mo-5Zr-3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young's modulus
Takuya Ishimoto et al.
SCRIPTA MATERIALIA (2017)
Insight into γ-Ni/γ′-Ni3Al interfacial energy affected by alloying elements
Xuan L. Liu et al.
MATERIALS & DESIGN (2017)
The effects of refractory elements on Ni-excesses and Ni-depletions at γ(f.c.c.)/γ'(L12) interfaces in model Ni-based superalloys: Atom-probe tomographic experiments and first-principles calculations
Yanyan Huang et al.
ACTA MATERIALIA (2016)
Influence of alloying elements upon the theoretical tensile strength of Ni-based model superalloy: γ-Ni/γ′-Ni3Al multilayer
Xiao-Xia Wu et al.
COMPUTATIONAL MATERIALS SCIENCE (2016)
Additive manufacturing of metallic components by selective electron beam melting - a review
C. Koerner
INTERNATIONAL MATERIALS REVIEWS (2016)
The metallurgy and processing science of metal additive manufacturing
W. J. Sames et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
Processability of different IN738LC powder batches by selective laser melting
Roman Engeli et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Elasticity mapping of precipitates in nickel-base superalloys using atomic force acoustic microscopy
Phani M. Kalyan et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Tailoring the texture of IN738LC processed by selective laser melting (SLM) by specific scanning strategies
Fabian Geiger et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles
Michael Cloots et al.
MATERIALS & DESIGN (2016)
On the prediction of the yield stress of unimodal and multimodal γ′ Nickel-base superalloys
E. I. Galindo-Nava et al.
ACTA MATERIALIA (2015)
Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)
Karsten Kunze et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effects of loading misalignment and tapering angle on the measured mechanical properties of nanowires
Yujie Chen et al.
NANOTECHNOLOGY (2015)
Intrinsic and extrinsic size effects in the deformation of amorphous CuZr/nanocrystalline Cu nanolaminates
Wei Guo et al.
ACTA MATERIALIA (2014)
The importance of sign and magnitude of γ/γ′ lattice misfit in superalloys-with special reference to the new γ′-hardened cobalt-base superalloys
Hael Mughrabi
ACTA MATERIALIA (2014)
Elemental partitioning and mechanical properties of Ti- and Ta-containing Co-Al-W-base superalloys studied by atom probe tomography and nanoindentation
Ivan Povstugar et al.
ACTA MATERIALIA (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Hot tearing in polycrystalline Ni-based IN738LC superalloy: Influence of Zr content
D. Heydari et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting
William J. Sames et al.
JOURNAL OF MATERIALS RESEARCH (2014)
High temperature material properties of IN738LC processed by selective laser melting (SLM) technology
L. Rickenbacher et al.
RAPID PROTOTYPING JOURNAL (2013)
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Lawrence E. Murr et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2012)
Precipitation behavior of grain boundary M23C6 and its effect on tensile properties of Ni-Cr-W based superalloy
Rui Hu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Advances in the reconstruction of atom probe tomography data
B. Gault et al.
ULTRAMICROSCOPY (2011)
Compression testing of metallic glass at small length scales: Effects on deformation mode and stability
Ashwini Bharathula et al.
ACTA MATERIALIA (2010)
Analysis of laser beam weldability of Inconel 738 superalloy
A. T. Egbewande et al.
MATERIALS CHARACTERIZATION (2010)
Cr-rich nanosize precipitates in a standard heat-treated Inconel 738 superalloy
Huai-Ruo Zhang et al.
PHILOSOPHICAL MAGAZINE (2010)
Grain size dependence of the elastic modulus in nanostructured NiTi
Q. S. Mei et al.
SCRIPTA MATERIALIA (2010)
The intermediate temperature deformation of Ni-based superalloys: Importance of reordering
L. Kovarik et al.
JOM (2009)
Measuring anisotropy in Young's modulus of copper using microcantilever testing
David E. J. Armstrong et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Improvement in Laser Weldability of INCONEL 738 Superalloy through Microstructural Modification
A. T. Egbewande et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Segregation of tungsten at γ'(L12)/γ(fcc) interfaces in a Ni-based superalloy: An atom-probe tomographic and first-principles study
Yaron Amouyal et al.
APPLIED PHYSICS LETTERS (2008)
Size effect on strength and strain hardening of small-scale [111] nickel compression pillars
C. P. Frick et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Loss of pseudoelasticity in nickel-titanium sub-micron compression pillars
C. P. Frick et al.
ACTA MATERIALIA (2007)
Nanoindentation study on elastic and plastic anisotropies of Cu single crystals
W. Wang et al.
PHILOSOPHICAL MAGAZINE (2006)
Study of the fusion zone and heat-affected zone microstructures in tungsten inert gas-welded INCONEL 738LC superalloy
OA Ojo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Three-dimensional numerical simulation of Vickers indentation tests
JM Antunes et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
The effect of lattice misfit on the dislocation motion in superalloys during high-temperature low-stress creep
JX Zhang et al.
ACTA MATERIALIA (2005)
Effect of carbides on the creep properties of a Ni-base superalloy M963
LZ He et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Contribution of constitutional liquation of gamma prime precipitate to weld HAZ cracking of cast Inconel 738 superalloy
OA Ojo et al.
SCRIPTA MATERIALIA (2004)
On incipient melting during high temperature heat treatment of cast Inconel 738 superalloy
OA Ojo et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Creep behaviour of Ni-base single-crystal superalloys with various γ′ volume fraction
T Murakumo et al.
ACTA MATERIALIA (2004)
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
WC Oliver et al.
JOURNAL OF MATERIALS RESEARCH (2004)
Site preference and alloying effect of platinum group metals in γ′-Ni3Al
CY Geng et al.
ACTA MATERIALIA (2004)
Microstructural study of weld fusion zone of TIG welded IN 738LC nickel-based superalloy
OA Ojo et al.
SCRIPTA MATERIALIA (2004)
On the grain-size-dependent elastic modulus of nanocrystalline materials with and without grain-boundary sliding
P Sharma et al.
JOURNAL OF MATERIALS RESEARCH (2003)
The coarsening kinetics of γ′ particles in nickel-based alloys
X Li et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)
Share Paper
