Related references
Note: Only part of the references are listed.Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice
J. P. Oliveira et al.
PROGRESS IN MATERIALS SCIENCE (2020)
Rapid Solidification and Non-equilibrium Phase Constitution in Laser Powder Bed Fusion (LPBF) of AlSi10Mg Alloy: Analysis of Nano-precipitates, Eutectic Phases, and Hardness Evolution
Hong Qin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Heat Treatments and Critical Quenching Rates in Additively Manufactured Al-Si-Mg Alloys
Leonhard Hitzler et al.
MATERIALS (2020)
Additive manufacturing of an Fe-Cr-Ni-Al maraging stainless steel: Microstructure evolution, heat treatment, and strengthening mechanisms
Amir Hadadzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of post-process heat treatment on microstructure and properties of selective laser melted AlSi10Mg alloy
Longchao Zhuo et al.
MATERIALS LETTERS (2019)
A metallurgical phase transformation framework applied to SLM additive manufacturing processes
Qi Zhang et al.
MATERIALS & DESIGN (2019)
Microstructure, mechanical properties and strengthening mechanisms of AlCu5MnCdVA aluminum alloy fabricated by selective laser melting
Zhiheng Hu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
Nesma T. Aboulkhair et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Contribution of Mg2Si precipitates to the strength of direct metal laser sintered AlSi10Mg
Amir Hadadzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy
Luca Girelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
An atom probe tomography study of Pb-caustic SCC in alloy 800
S. Y. Persaud et al.
CORROSION SCIENCE (2018)
A comparison of Selective Laser Melting with bulk rapid solidification of AlSi10Mg alloy
Silvia Marola et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Deformation mechanism during dynamic loading of an additively manufactured AlSi10Mg_200C
Amir Hadadzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Unravelling dislocation networks in metals
Zaloa Arechabaleta et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
A new crystal plasticity framework to simulate the large strain behaviour of aluminum alloys at warm temperatures
Edward D. Cyr et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Dislocation network in additive manufactured steel breaks strength-ductility trade-off
Leifeng Liu et al.
MATERIALS TODAY (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting
Kun V. Yang et al.
SCRIPTA MATERIALIA (2018)
Solidification pattern, microstructure and texture development in Laser Powder Bed Fusion (LPBF) of Al10SiMg alloy
Hong Qin et al.
MATERIALS CHARACTERIZATION (2018)
Peritectic titanium alloys for 3D printing
Pere Barriobero-Vila et al.
NATURE COMMUNICATIONS (2018)
Dynamic loading of direct metal laser sintered AlSi10Mg alloy: Strengthening behavior in different building directions
Amir Hadadzadeh et al.
MATERIALS & DESIGN (2018)
Anisotropic Mechanical Behavior of AlSi10Mg Parts Produced by Selective Laser Melting
Ming Tang et al.
JOM (2017)
Low temperature annealing dedicated to AlSi10Mg selective laser melting products
J. Fiocchi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
On microstructure and mechanical properties of additively manufactured AlSi10Mg_200C using recycled powder
Hamed Asgari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Strength and strain hardening of a selective laser melted AlSi10Mg alloy
B. Chen et al.
SCRIPTA MATERIALIA (2017)
Additive manufacturing: Toward holistic design
Bradley H. Jared et al.
SCRIPTA MATERIALIA (2017)
Solidification and solid-state transformation sciences in metals additive manufacturing
Michael M. Kirka et al.
SCRIPTA MATERIALIA (2017)
Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting
A. B. Spierings et al.
MATERIALS & DESIGN (2017)
Analysis of the metastable precipitates in peak-hardness aged Al-Mg-Si(-Cu) alloys with differing Si contents
K. Buchanan et al.
ACTA MATERIALIA (2017)
Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility
X. P. Li et al.
ACTA MATERIALIA (2017)
Microstructure and strength of selectively laser melted AlSi10Mg
J. Wu et al.
ACTA MATERIALIA (2016)
Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting
Jyoti Suryawanshi et al.
ACTA MATERIALIA (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Epitaxy and Microstructure Evolution in Metal Additive Manufacturing
Amrita Basak et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment
Nesma T. Aboulkhair et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Improving the fatigue behaviour of a selectively laser melted aluminium alloy: Influence of heat treatment and surface quality
Nesma T. Aboulkhair et al.
MATERIALS & DESIGN (2016)
The influence of processing parameters on aluminium alloy A357 manufactured by Selective Laser Melting
Heng Rao et al.
MATERIALS & DESIGN (2016)
Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
Jingjing Yang et al.
MATERIALS & DESIGN (2016)
A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility
X. P. Li et al.
ACTA MATERIALIA (2015)
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
E. O. Olakanmi et al.
PROGRESS IN MATERIALS SCIENCE (2015)
In situ heat treatment in selective laser melted martensitic AISI 420 stainless steels
P. Krakhmalev et al.
MATERIALS & DESIGN (2015)
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
Lore Thijs et al.
ACTA MATERIALIA (2013)
Predicting equilibrium shape of precipitates as function of coherency state
R. Shi et al.
ACTA MATERIALIA (2012)
Mechanical Blocking Mechanism for the Columnar to Equiaxed Transition
V. B. Biscuola et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Residual stresses in selective laser sintering and selective laser melting
Peter Mercelis et al.
RAPID PROTOTYPING JOURNAL (2006)
Progress in structural materials for aerospace systems
JC Williams et al.
ACTA MATERIALIA (2003)
Single-crystal laser deposition of superalloys:: Processing-microstructure maps
M Gäumann et al.
ACTA MATERIALIA (2001)
Recent development in aluminium alloys for the automotive industry
WS Miller et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Share Paper
