4.5 Article

Pyrolysis of lignin (De-alkaline) via TG/DSC-FTIR and TG-MS: pyrolysis characteristics, thermo-kinetics, and gas products

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Evaluation of thermokinetics methodology, parameters, and coke characterization of co-pyrolysis of bituminous coal with herbaceous and agricultural biomass

Lin Mu et al.

Summary: This paper used conventional thermogravimetric analysis and a new congruent-mass thermogravimetric analysis to study the reaction mechanism and influencing factors of the co-pyrolysis process of coal and biomass. The results show that congruent-mass thermogravimetric analysis can compare the interactions in the co-pyrolysis process more intuitively and reduce the influence of initial mass on the determination of interaction relationship. The co-pyrolysis process exhibits a synergistic effect, and the heating rate and carrier gas flow rate have an effect on the process. The activation energy required in the co-pyrolysis stage is lower than that in the pyrolysis stage alone. Biomass coke has a more developed pore structure compared to coal.

BIOMASS CONVERSION AND BIOREFINERY (2023)

Article Thermodynamics

Release behaviors of sulfur-containing pollutants during combustion and gasification of coals by TG-MS

Haixia Zhang et al.

Summary: This study investigated the release behaviors of sulfur species in coal combustion and gasification processes, finding that temperature plays a significant role in controlling the release of sulfur compounds.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Article Thermodynamics

Non-isothermal TG/DTG-FTIR kinetic study for devolatilization ofDalbergia sissoowood under nitrogen atmosphere

Ajay Sharma et al.

Summary: The study focused on the chemical characterization and pyrolysis kinetics of Dalbergia sissoowood (DSW), including proximate, ultimate, biochemical compositions, and TG-FTIR analysis. Various volatiles were identified during pyrolysis using FTIR coupled with TG system. The activation energies for DSW pyrolysis were evaluated at different heating rates, with the variations in pyrolysis behavior explained based on the type of released volatiles over time. The solid-state kinetic models proposed by Malek method, specifically the 3-D diffusion model followed by random nucleation, provided the best fits with the TG results.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Article Green & Sustainable Science & Technology

Temperature- and heating rate-dependent pyrolysis mechanisms and emissions of Chinese medicine residues and numerical reconstruction and optimization of their non-linear dynamics

Zhiyun Chen et al.

Summary: This study focuses on analyzing the pyrolysis characteristics, kinetics, and thermodynamic parameters of Chinese medicine residues (CMR) using artificial neural networks (ANN) for reconstruction and optimization. TG-FTIR analysis identified gases and functional groups present in the pyrolytic process, as well as the main pyrolytic products. The research provides valuable insights for the high-value utilization of Chinese medicine residues.

RENEWABLE ENERGY (2021)

Article Engineering, Environmental

Comparative (co-)pyrolytic performances and by-products of textile dyeing sludge and cattle manure: Deeper insights from Py-GC/MS, TG-FTIR, 2D-COS and PCA analyses

Junhui Zhang et al.

Summary: Co-pyrolysis enhances the pyrolytic performance of textile dyeing sludge and cattle manure, increasing volatile emissions and potentially enriching aromatic components. By lowering the operational temperature to 450 degrees Celsius, the relative content of aromatic components can be enhanced. These findings provide practical insights into controlling and applying co-pyrolysis for producing high value-added energy and products.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Energy & Fuels

Effect of protic ionic liquid treatment on the pyrolysis products of lignin extracted from oil palm biomass

Tazien Rashid et al.

Summary: The study demonstrates that the use of aprotic ionic liquid pyridinium formate [PyFor] for lignin extraction from oil palm biomass increases its thermal stability, affecting its carbon content and calorific value. In addition, the [PyFor] extracted lignins contain more phenolic and aromatic compounds, making them suitable for use as biofuels.
Article Energy & Fuels

A novel method for removing organic sulfur from high-sulfur coal: Migration of organic sulfur during microwave treatment with NaOH-H2O2

Shuangshuang Cai et al.

Summary: A novel technology using microwave irradiation and NaOH-H2O2 was proposed to remove organic sulfur from coal, transforming it mainly into SO32- and SO42-. The removal ease of different organic sulfur functional groups is related to the strength of the sulfur-containing bond and the reactivity of S atoms.
Article Environmental Sciences

Thermal conversion behaviors, kinetics, and thermodynamics of wastewater sludge via thermogravimetric analysis, and emission characteristics from a large-scale incinerator

Jianbiao Chen et al.

Summary: This study investigated the combustion properties, kinetics, thermodynamics, operation parameters, and gas emissions of petrochemical wastewater and its sludge. Results showed that the gas pollutants in flue gas after incineration did not exceed discharge limits, and combustion efficiency met regulatory requirements. The research provided insights into the combustion performance and environmental impact of petrochemical wastewater incineration.

JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2021)

Article Thermodynamics

Pyrolysis characteristics and non-isothermal kinetics of waste wood biomass

Jingjing Li et al.

Summary: This study investigated the pyrolysis process of waste wood biomass using various analytical methods, finding that the pyrolysis process can be divided into three phases, with lower activation energies for waste camphor compared to waste bamboo.

ENERGY (2021)

Article Energy & Fuels

Enhanced lignin extraction and optimisation from oil palm biomass using neural network modelling

Tazien Rashid et al.

Summary: The study developed response surface methodology (RSM) and artificial neural network (ANN) models for enhanced lignin extraction, with results showing that the ANN model was superior to the RSM model. This is the first study reporting a detailed comparison and prediction of lignin extraction using RSM and ANN.
Article Environmental Sciences

Thermal behaviors, combustion mechanisms, evolved gasses, and ash analysis of spent potlining for a hazardous waste management

Guang Sun et al.

Summary: The study focused on characterizing the combustion mechanisms and properties of spent potlining (SPL) from the aluminum industry, aiming to enhance circular waste utilization. The findings suggested an optimal temperature and heating rate combination for joint optimization, while also identifying the formation of substantial NaF and CaF2 in the residual ash. The research contributes to turning SPL waste into a benign input for circular waste utilization.

JOURNAL OF ENVIRONMENTAL SCIENCES (2021)

Article Chemistry, Analytical

Study on non-isothermal kinetics and the influence of calcium oxide on hydrogen production during bituminous coal pyrolysis

Hao Zhang et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2020)

Article Thermodynamics

Pyrolytic kinetics, reaction mechanisms and products of waste tea via TG-FTIR and Py-GC/MS

Haiming Cai et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Article Energy & Fuels

Sequential mineral transformation during underground coal gasification with the presence of coal partings

Shuqin Liu et al.

INTERNATIONAL JOURNAL OF COAL GEOLOGY (2019)

Article Agricultural Engineering

Pyrolysis of Musa balbisiana flower petal using thermogravimetric studies

Aswin Sriram et al.

BIORESOURCE TECHNOLOGY (2018)

Article Energy & Fuels

Mild Hydrogenation of Lignin Depolymerization Products Over Ni/SiO2 Catalyst

Riyang Shu et al.

ENERGY & FUELS (2017)

Review Biotechnology & Applied Microbiology

Conversion of lignin into value-added materials and chemicals via laccase-assisted copolymerization

Mark D. Cannatelli et al.

APPLIED MICROBIOLOGY AND BIOTECHNOLOGY (2016)

Article Agricultural Engineering

Slow pyrolysis of prot, alkali and dealkaline lignins for production of chemicals

Bijoy Biswas et al.

BIORESOURCE TECHNOLOGY (2016)

Review Green & Sustainable Science & Technology

Effect of process parameters on production of biochar from biomass waste through pyrolysis: A review

Manoj Tripathi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Article Thermodynamics

Co-pyrolysis between microalgae and textile dyeing sludge by TG-FTIR: Kinetics and products

Xiaowei Peng et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

Article Chemistry, Physical

A density functional theory study on formation mechanism of CO, CO2 and CH4 in pyrolysis of lignin

Jinbao Huang et al.

COMPUTATIONAL AND THEORETICAL CHEMISTRY (2014)

Article Agricultural Engineering

The kinetic analysis of the pyrolysis of agricultural residue under non-isothermal conditions

Chao Gai et al.

BIORESOURCE TECHNOLOGY (2013)

Article Agricultural Engineering

Co-pyrolysis behaviors of saw dust and Shenfu coal in drop tube furnace and fixed bed reactor

Shuaidan Li et al.

BIORESOURCE TECHNOLOGY (2013)

Article Agricultural Engineering

Co-pyrolysis characteristics of microalgae Chlorella vulgaris and coal through TGA

Chunxiang Chen et al.

BIORESOURCE TECHNOLOGY (2012)

Article Chemistry, Analytical

Pyrolysis of waste materials using TGA-MS and TGA-FTIR as complementary characterisation techniques

Surjit Singh et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2012)

Review Chemistry, Analytical

Biomass pyrolysis kinetics: A comparative critical review with relevant agricultural residue case studies

John E. White et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2011)

Article Thermodynamics

Overview of recent advances in thermo-chemical conversion of biomass

Linghong Zhang et al.

ENERGY CONVERSION AND MANAGEMENT (2010)

Article Chemistry, Applied

Synergies in co-pyrolysis of Thai lignite and corncob

Taro Sonobe et al.

FUEL PROCESSING TECHNOLOGY (2008)