4.6 Article

Influence of Graphene Nano Fillers and Carbon Nano Tubes on the Mechanical and Thermal Properties of Hollow Glass Microsphere Epoxy Composites

Journal

PROCESSES
Volume 10, Issue 1, Pages -

Publisher

MDPI
DOI: 10.3390/pr10010040

Keywords

epoxy; hollow glass microsphere; nano fillers; carbon nano tube; graphene; mechanical and thermal properties

Funding

  1. King Khalid University (KKU), Abha-Asir, Kingdom of Saudi Arabia [RGP.2/58/42]

Ask authors/readers for more resources

The present work aimed to analyze the effects of carbon nano tubes and graphene nano fillers on the mechanical and thermal properties of hollow glass microsphere reinforced epoxy composites. The results showed that the composites with graphene had the highest modulus, while the impact strength of all composites decreased with an increase in the content of hollow glass microballoons. Additionally, the thermal conductivity of HGM/epoxy composites was found to be lower than other compositions.
The present work aimed to analyze the roll of carbon nano tubes and graphene nano fillers on the mechanical and thermal characteristics of hollow glass microsphere reinforced epoxy composites. Composites with varying content of hollow glass microballoons (2, 4, 6, 8, and 10 wt %) reinforced in epoxy matrix were fabricated. Additionally, two more types of composites, one with graphene nano fillers and the other with carbon nano tube at a constant 0.5 wt %, were fabricated with varying weight percentages of hollow glass microballoons (2, 4, 6, 8, and 10%). The composites were fabricated using an open mold casting process. Composites were tested for thermal and mechanical properties. The tensile and flexural moduli were found to rise as the HGM concentration increased. Graphene-filled HGM/epoxy composites revealed the highest modulus compared with HGM/epoxy and HGM/CNT/epoxy composites. The impact strength of all composite types decreased as the HGM content increased. Neat epoxy specimens revealed low response as compared with all the composites tested. Further, the thermal conductivity of HGM/epoxy composites was lower as compared with other compositions and neat epoxy. Scanning electron microscopy was used to analyze the surface morphological behavior of the composites subjected to flexural test. It was found that HGM/G/E composites with 10% of HGM and 0.5% of graphene by weight in epoxy matrix were the optimum.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available