4.6 Article

Numerical Study of Effect of Sawtooth Riblets on Low-Reynolds-Number Airfoil Flow Characteristic and Aerodynamic Performance

Journal

PROCESSES
Volume 9, Issue 12, Pages -

Publisher

MDPI
DOI: 10.3390/pr9122102

Keywords

airfoil; riblets; computational fluid dynamics; drag reduction

Funding

  1. National Key Research and Development Program of China [2018YFB0606101]
  2. Fundamental Research Funds for the Central Universities, HUST [2021JYCXJJ048]

Ask authors/readers for more resources

This study investigates the effects of sawtooth riblets on NACA4412 airfoil at low Reynolds number, focusing on the impact of riblet length and height on aerodynamic performance. Results show that the most effective riblet length is 0.8 chord, leading to significant improvements in lift and drag coefficients, while the most effective height for a riblet with a length of 0.5 chord is 0.6 mm. Riblets can facilitate a greater improvement in airfoil performance at larger angles of attack.
Riblets with an appropriate size can effectively restrain turbulent boundary layer thickness and reduce viscous drag, but the effects of riblets strongly depend on the appearance of the fabric that is to be applied and its operating conditions. In this study, in order to improve the aerodynamic performance of a low-pressure fan by using riblet technology, sawtooth riblets on NACA4412 airfoil are examined at the low Reynolds number of 1 x 10(5), and the airfoil is operated at angles of attack (AOAs) ranging from approximately 0 degrees to 12 degrees. The numerical simulation is carried out by employing the SST k-omega turbulence model through the Ansys Fluent, and the effects of the riblets' length and height on aerodynamic performance and flow characteristics of the airfoil are investigated. The results indicate that the amount of drag reduction varies greatly with riblet length and height and the AOA of airfoil flow. By contrast, the riblets are detrimental to the airfoil in some cases. The most effective riblet length is found to be a length of 0.8 chord, which increases the lift and reduces the drag under whole AOA conditions, and the maximum improvements in both are 17.46% and 15.04%, respectively. The most effective height for the riblet with the length of 0.5 chord is 0.6 mm. This also improves the aerodynamic performance and achieves a change rate of 12.67% and 14.8% in the lift and drag coefficients, respectively. In addition, the riblets facilitate a greater improvement in airfoil at larger AOAs. The flow fields demonstrate that the riblets with a drag reduction effect form the antifriction-bearing structure near the airfoil surface and effectively restrain the trailing separation vortex. The ultimate cause of the riblet drag reduction effect is the velocity gradient at the bottom of the boundary layers being increased by the riblets, which results in a decrease in boundary thickness and energy loss.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available