☆ 4.7 Review

3D Printing of Pediatric Medication: The End of Bad Tasting Oral Liquids?-A Scoping Review

PHARMACEUTICS (2022)

Related references

Note: Only part of the references are listed.

Review Medical Informatics

Quality of FDM 3D Printed Medicines for Pediatrics: Considerations for Formulation Development, Filament Extrusion, Printing Process and Printer Design

Julian Quodbach et al.

Summary: 3D printing technology enables dose individualization for pediatric medicines and precision medicine approach, but there is a need for improvement in understanding critical quality attributes and process parameters. To ensure patient health and safety, cleaning and process validation should be established, along with adequate analytical methods for in-process control of intermediates.

THERAPEUTIC INNOVATION & REGULATORY SCIENCE (2022)

Add to Collection

Editorial Material Pediatrics

3D printing of drugs: expanding the options for child-tailored pharmacotherapy

Eveline E. M. van Kampen et al.

ARCHIVES OF DISEASE IN CHILDHOOD (2022)

Add to Collection

Review Pharmacology & Pharmacy

Path towards efficient paediatric formulation development based on partnering with clinical pharmacologists and clinicians, a conect4children expert group white paper

Jennifer Walsh et al.

Summary: Improving global access to novel age-appropriate formulations for paediatric subsets is a priority to meet the needs of these patients. However, the development and introduction of paediatric formulations still lags behind adult products, primarily due to additional complexities associated with creating acceptable age-appropriate medicines.

BRITISH JOURNAL OF CLINICAL PHARMACOLOGY (2022)

Add to Collection

Article Pharmacology & Pharmacy

3D printed tacrolimus suppositories for the treatment of ulcerative colitis

Iria Seoane-Viano et al.

Summary: This study presents the fabrication of self-supporting tacrolimus suppositories using 3D printing technology, offering potential benefits for patients with ulcerative colitis. Although the two suppository formulations showed differences in drug release rate and disintegration, both released over 80% of the drug within 120 minutes.

ASIAN JOURNAL OF PHARMACEUTICAL SCIENCES (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Vat photopolymerization 3D printing for advanced drug delivery and medical device applications

Xiaoyan Xu et al.

Summary: Vat photo-polymerization 3D printing technology offers high resolution and fast printing speeds, making it ideal for creating custom medical devices and drug delivery systems. Its adoption is expected to advance personalized healthcare systems.

JOURNAL OF CONTROLLED RELEASE (2021)

Add to Collection

Review Pharmacology & Pharmacy

3D Printing as a Promising Tool in Personalized Medicine

Vanessa Marcia Vaz et al.

Summary: Personalized medicine aims to tailor medication to individuals based on their physiology, drug response, and genetic profile. One major technology emerging to enable personalized medicine is 3D printing, which can create a variety of pharmaceutical dosage forms. The future application of this technology may include dispensing prescriptions based on individual needs in a clinical setting.

AAPS PHARMSCITECH (2021)

Add to Collection

Review Pharmacology & Pharmacy

Versatility on demand - The case for semi-solid micro-extrusion in pharmaceutics

Jhinuk Rahman et al.

Summary: Semi-solid micro-extrusion technology offers advantages such as easy incorporation of actives, room-temperature processability, and avoidance of cross-contamination, attracting researchers' attention in recent years. Established process models based on viscosity and printability discussions can help develop high-quality printed medicines, but challenges remain in terms of regulatory guidance and quality assurance.

ADVANCED DRUG DELIVERY REVIEWS (2021)

Add to Collection

Article Pharmacology & Pharmacy

Exploration and evaluation of dynamic dose-control platform for pediatric medicine based on Drop-on-Powder 3D printing technology

Mengsuo Cui et al.

Summary: This study explored the possibility of using a DoP technology-based desktop 3D printer to build a dynamic dose-control platform for personalized medicines, which demonstrated high accuracy in drug dose regulation. It is particularly suitable for pediatric patients who require flexible dose adjustments.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

Add to Collection

Article Pharmacology & Pharmacy

3D printing of gummy drug formulations composed of gelatin and an HPMC-based hydrogel for pediatric use

Tatsuaki Tagami et al.

Summary: The study used a 3D bioprinter to fabricate gummy drug formulations for pediatric patients, incorporating gelatin, HPMC, and other materials. The strength of the gummy formulations was significantly influenced by the concentration of gelatin, and dissolution tests showed 85% drug release within 15 minutes from most formulations.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

Add to Collection

Article Pharmacology & Pharmacy

Development of immediate release 3D-printed dosage forms for a poorly water-soluble drug by fused deposition modeling: Study of morphology, solid state and dissolution

Marina Fanous et al.

Summary: 3D printing technologies like Fused Deposition Modeling (FDM) offer a unique opportunity in pharmaceutical production, but FDM-printed tablets may have slow dissolution. Developing immediate release 3D-printed dosage forms with poorly water-soluble compounds is challenging but necessary for broad applicability in pharmaceutical development portfolios.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

Add to Collection

Article Pharmacology & Pharmacy

Can filaments be stored as a shelf-item for on-demand manufacturing of oral 3D printed tablets? An initial stability assessment

Tochukwu C. Okwuosa et al.

Summary: 3D printing of oral solid dosage forms is a newly introduced approach for personalized dosing, with Fused Deposition Modelling (FDM) being a promising technique. The success of FDM relies heavily on the mass manufacturing of stable filaments. The study investigated the stability of various polymer filaments over 6 months and their impact on the potential of on-demand manufacturing of 3D printed tablets.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Fused Deposition Modeling (FDM), the new asset for the production of tailored medicines

Sylvain Cailleaux et al.

Summary: The shift towards precision medicine in conventional medicine has led to a focus on customizing oral drug delivery using 3D printing technology, particularly Fused Deposition Modeling (FDM). Various FDM methods have been reported in the production of pharmaceutical solid oral forms, with challenges such as high printing temperatures for thermosensitive ingredients and moisture sensitivity in storage studies. FDM appears to be well-suited for treating rare diseases and populations requiring tailored doses or release kinetics.

JOURNAL OF CONTROLLED RELEASE (2021)

Add to Collection

Article Pharmacology & Pharmacy

Innovative color jet 3D printing of levetiracetam personalized paediatric preparations

Zengming Wang et al.

Summary: The innovative color jet 3D printing technology was used to produce colorful cartoon levetiracetam pediatric preparations with high accuracy and reproducibility. The tablets designed with external and internal spatial structures showed admirable appearances and immediate release characteristics, demonstrating the potential of personalized administration.

ASIAN JOURNAL OF PHARMACEUTICAL SCIENCES (2021)

Add to Collection

Article Pharmacology & Pharmacy

Fundamental Investigations into Metoprolol Tartrate Deposition on Orodispersible Films by Inkjet Printing for Individualised Drug Dosing

Olga Kiefer et al.

Summary: Individualized medicine is gaining attention in pharmaceutical research, requiring new concepts and manufacturing technologies. The combination of orodispersible films and inkjet printing technology provides precise and acceptable doses of MPT for pediatric use. Uniform dosages can be achieved, but considerations are needed for implementation of inkjet printing in pharmaceutical production due to nozzle aging affecting printed quantity.

PHARMACEUTICS (2021)

Add to Collection

Article Chemistry, Medicinal

3D Printing of Mini Tablets for Pediatric Use

Julius Krause et al.

Summary: This study successfully produced pediatric mini tablets using FDM 3D printing technology, processing caffeine and propranolol hydrochloride into dosage forms suitable for children. By adjusting the number and diameter of mini tablets, different release behaviors were achieved.

PHARMACEUTICALS (2021)

Add to Collection

Article Chemistry, Medicinal

Extemporaneous printing of diclofenac orodispersible films for pediatrics

Garba M. Khalid et al.

Summary: The potential application of hot-melt ram extrusion printing for producing diclofenac orodispersible films (ODF) made of maltodextrin was studied, focusing on the effects of taste-masking agents and an opacifier. The study demonstrated the feasibility of printing ODF loaded with a thermosensitive drug using hot-melt technologies, showing improved tensile properties and disintegration time. The addition of diclofenac significantly enhanced the ODF tensile strength, while titanium dioxide played a role in reducing peel forces and improving detachment from packaging material.

DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2021)

Add to Collection

Article Pharmacology & Pharmacy

Manipulations of Oral Medications in Paediatric Neurology and Oncology Care at a Swedish University Hospital: Health Professionals' Attitudes and Sources of Information

Rania Kader et al.

Summary: The study in pediatric wards in Sweden found that approximately 15% of oral medications needed manipulation, with around 30% of patients using enteral feeding tubes. Risks to patient safety such as cross contamination and suboptimal absorption were identified. Nurses experienced stress and fear of making mistakes due to lack of information, while pediatricians lacked time to search for proper information on medication manipulations. To improve safety, the introduction of clinical pharmacists and more ready-to-administer medications with necessary information is suggested.

PHARMACEUTICS (2021)

Add to Collection

Article Pharmacology & Pharmacy

Customisable Tablet Printing: The Development of Multimaterial Hot Melt Inkjet 3D Printing to Produce Complex and Personalised Dosage Forms

Anna Lion et al.

Summary: One of the key features of 3D printing is its ability to create multi-material objects with complex geometries. In pharmaceutics, this means the potential for dosage forms with multi-drug loading and tailored dosing. A new dual material hot-melt inkjet 3D printing system has been developed to allow precise control of multi-material printing without the need for solvents, showing promise for personalized drug release forms.

PHARMACEUTICS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Semi-solid extrusion 3D printing in drug delivery and biomedicine: Personalised solutions for healthcare challenges

Iria Seoane-Viano et al.

Summary: SSE 3D printing is a low-temperature printing technology suitable for drug delivery and biomedical applications, creating objects of any size and shape by sequentially depositing layers of gel or paste.

JOURNAL OF CONTROLLED RELEASE (2021)

Add to Collection

Review Pharmacology & Pharmacy

Excipients in the Paediatric Population: A Review

Khadija Rouaz et al.

Summary: This theoretical study critically reviews the use of excipients in paediatric medicine, emphasizing the importance of safety checks and toxicity studies. It identifies common excipients used in pediatric formulations and explores the orally disintegrating tablets, ODT, as a promising pharmaceutical form for children.

PHARMACEUTICS (2021)

Add to Collection

Article Pharmacology & Pharmacy

Production of Reproducible Filament Batches for the Fabrication of 3D Printed Oral Forms

Stephane Roulon et al.

Summary: This research aimed to identify important parameters for 3D printing of oral formulations and evaluate the physical form of drugs and mechanical properties of filaments through investigating different formulation storage conditions.

PHARMACEUTICS (2021)

Add to Collection

Article Pharmacology & Pharmacy

Pediatric formulation development-Challenges of today and strategies for tomorrow: Summary report from M-CERSI workshop 2019

David Cheng Thiam Tan et al.

Summary: The workshop on Pediatric Formulation Development covered a range of topics including formulation, analytical, clinical, regulatory, and industrial aspects, with a focus on addressing challenges and strategies for the future of pediatric drug development. Participants from various sectors engaged in discussions and breakout sessions to explore regional differences, patient-centric factors, and potential collaboration opportunities for advancing pediatric formulation development.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2021)

Add to Collection

Article Pharmacology & Pharmacy

A micro-extrusion 3D printing platform for fabrication of orodispersible printlets for pediatric use

Diaz-Torres Eduardo et al.

Summary: 3D printing pharmaceuticals can offer personalized medicines, particularly beneficial for treating pediatric patients. This study successfully optimized printing parameters and surface materials to produce high-quality orodispersible printlets of hydrochlorothiazide that meet European Pharmacopoeia requirements.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

Add to Collection

Article Pharmacology & Pharmacy

3D printed furosemide and sildenafil tablets: Innovative production and quality control

I Lafeber et al.

Summary: The study successfully produced furosemide and sildenafil tablets for pediatric patients using a novel 3D printer, with content uniformity and dissolution rate meeting the requirements of the European Pharmacopoeia.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

Add to Collection

Review Biochemistry & Molecular Biology

3D-Printing of Drug-Eluting Implants: An Overview of the Current Developments Described in the Literature

Vanessa Domsta et al.

Summary: The use of 3D printing technology for drug-eluting implants combines targeted local drug therapy with precise disease location and individualized needs. Research has focused on various materials and printing techniques to achieve implants with different properties, showing great potential in multiple application fields.

MOLECULES (2021)

Add to Collection

Article Pharmacology & Pharmacy

Direct Powder Extrusion 3D Printing of Praziquantel to Overcome Neglected Disease Formulation Challenges in Paediatric Populations

Janine Boniatti et al.

Summary: This study demonstrates the successful preparation of pediatric Printlets(TM) of praziquantel using DPE 3DP technology, addressing the lack of suitable pediatric formulations for schistosomiasis treatment. The technology showed excellent taste masking capabilities and significantly increased praziquantel release, potentially overcoming the main formulation hurdles of the drug.

PHARMACEUTICS (2021)

Add to Collection

Review Toxicology

Pharmaceutical Compounding: a History, Regulatory Overview, and Systematic Review of Compounding Errors

C. James Watson et al.

Summary: Medications are compounded in the US when needed formulations are not commercially available, but the piecemeal regulatory oversight has resulted in compounding errors causing patient harm. Concentration errors and contamination errors are the main issues in compounding, disproportionately affecting children and patients receiving parenteral medications. Government, pharmacy industry, and medical providers need to work together to reduce the risk of patient harm caused by compounding errors.

JOURNAL OF MEDICAL TOXICOLOGY (2021)

Add to Collection

Article Chemistry, Medicinal

Warpage optimization and influence factors analysis of 3D printing personalized JJY tablets

Xiaoting Wang et al.

DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2020)

Add to Collection

Article Pharmacology & Pharmacy

Preparation and application of subdivided tablets using 3D printing for precise hospital dispensing

Zijie Zheng et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2020)

Add to Collection

Article Pharmacology & Pharmacy

Paediatric-friendly chocolate-based dosage forms for the oral administration of both hydrophilic and lipophilic drugs fabricated with extrusion-based 3D printing

Christina Karavasili et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2020)

Add to Collection

Article Pharmacology & Pharmacy

A Pediatrics Utilization Study in The Netherlands to Identify Active Pharmaceutical Ingredients Suitable for Inkjet Printing on Orodispersible Films

J. Carolina Visser et al.

PHARMACEUTICS (2020)

Add to Collection

Review Pharmacology & Pharmacy

Patient Centric Pharmaceutical Drug Product Design-The Impact on Medication Adherence

Enrica Menditto et al.

PHARMACEUTICS (2020)

Add to Collection

Article Pharmacology & Pharmacy

Benefits and Prerequisites Associated with the Adoption of Oral 3D-Printed Medicines for Pediatric Patients: A Focus Group Study among Healthcare Professionals

Maria Rautamo et al.

PHARMACEUTICS (2020)

Add to Collection

Article Chemistry, Medicinal

Semi-solid extrusion 3D printing ODFs: an individual drug delivery system for small scale pharmacy

Ting-Ting Yan et al.

DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2020)

Add to Collection

Review Pharmacology & Pharmacy

Therapy for the individual: Towards patient integration into the manufacturing and provision of pharmaceuticals

Rydvikha Govender et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2020)

Add to Collection

Article Pharmacology & Pharmacy

3D printing: Principles and pharmaceutical applications of selective laser sintering

Atheer Awad et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

Add to Collection

Article Pharmacology & Pharmacy

Manipulation of Medicinal Products for Oral Administration to Paediatric Patients at a German University Hospital: An Observational Study

Julia Zahn et al.

PHARMACEUTICS (2020)

Add to Collection

Article Pharmacology & Pharmacy

Fabrication of high drug loading levetiracetam tablets using semi-solid extrusion 3D printing

Mengsuo Cui et al.

JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Pharmacology & Pharmacy

Fabrication of Taste-Masked Donut-Shaped TabletsViaFused Filament Fabrication 3D Printing Paired with Hot-Melt Extrusion Techniques

Honghe Wang et al.

AAPS PHARMSCITECH (2020)

Add to Collection

Review Chemistry, Medicinal

A Graphical Review on the Escalation of Fused Deposition Modeling (FDM) 3D Printing in the Pharmaceutical Field

Alice Melocchi et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2020)

Add to Collection

Article Pharmacology & Pharmacy

Improving the dissolution of a water-insoluble orphan drug through a fused deposition modelling 3-Dimensional printing technology approach

Mehtap Saydam et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2020)

Add to Collection

Article Pharmacology & Pharmacy

Retrospective survey of compounded medications for children in Japan

Jumpei Saito et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2020)

Add to Collection

Article Pharmacology & Pharmacy

Assessment of practices for suspended oral drugs by tablet crushing in pediatric units

David Nguyen et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2020)

Add to Collection

Review Pharmacology & Pharmacy

3D printing: An appealing route for customized drug delivery systems

Nermeen A. Elkasabgy et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

Add to Collection

Article Pharmacology & Pharmacy

3D printed gummies: Personalized drug dosage in a safe and appealing way

Helena Herrada-Manchon et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

Add to Collection

Article Pharmacology & Pharmacy

3D-Printing with precise layer-wise dose adjustments for paediatric use via pressure-assisted microsyringe printing

Ilias El Aita et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2020)

Add to Collection

Article Pharmacology & Pharmacy

I Spy with My Little Eye: A Paediatric Visual Preferences Survey of 3D Printed Tablets

Patricija Januskaite et al.

PHARMACEUTICS (2020)

Add to Collection

Review Pharmacology & Pharmacy

How can oral paediatric formulations be improved? A challenge for the XXI century

Miguel Moreira et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

Add to Collection

Article Pharmacology & Pharmacy

Application of 3D printing technology and quality by design approach for development of age-appropriate pediatric formulation of baclofen

Siddhant Palekar et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)

Add to Collection

Review Pharmacology & Pharmacy

The Digital Pharmacies Era: How 3D Printing Technology Using Fused Deposition Modeling Can Become a Reality

Maisa R. P. Araujo et al.

PHARMACEUTICS (2019)

Add to Collection

Article Pharmacology & Pharmacy

3D Printed Pellets (Miniprintlets): A Novel, Multi-Drug, Controlled Release Platform Technology

Atheer Awad et al.

PHARMACEUTICS (2019)

Add to Collection

Article Pharmacology & Pharmacy

Additive manufacturing of personalized orodispersible warfarin films

Erica Sjoholm et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)

Add to Collection

Article Pharmacology & Pharmacy

Towards Printed Pediatric Medicines in Hospital Pharmacies: Comparison of 2D and 3D-Printed Orodispersible Warfarin Films with Conventional Oral Powders in Unit Dose Sachets

Heidi Oblom et al.

PHARMACEUTICS (2019)

Add to Collection

Article Pharmacology & Pharmacy

Direct powder extrusion 3D printing: Fabrication of drug products using a novel single-step process

Alvaro Goyanes et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)

Add to Collection

Article Pharmacology & Pharmacy

Automated therapy preparation of isoleucine formulations using 3D printing for the treatment of MSUD: First single-centre, prospective, crossover study in patients

Alvaro Goyanes et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)

Add to Collection

Article Health Care Sciences & Services

Prevalence, determinants, and characteristics of extemporaneous compounding in Jordanian pharmacies

Hatim S. AlKhatib et al.

BMC HEALTH SERVICES RESEARCH (2019)

Add to Collection

Article Pediatrics

Manipulation of oral medication for children by parents and nurses occurs frequently and is often not supported by instructions

Anna C. van der Vossen et al.

ACTA PAEDIATRICA (2019)

Add to Collection

Article Pharmacology & Pharmacy

Embedded 3D Printing of Novel Bespoke Soft Dosage Form Concept for Pediatrics

Katarzyna Rycerz et al.

PHARMACEUTICS (2019)

Add to Collection

Article Chemistry, Medicinal

Exploration and Preparation of a Dose-Flexible Regulation System for Levetiracetam Tablets via Novel Semi-Solid Extrusion Three-Dimensional Printing

Mengsuo Cui et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2019)

Add to Collection

Article Pediatrics

Pediatric Compounding Pharmacy: Taking on the Responsibility of Providing Quality Customized Prescriptions

Tricia Heitman et al.

CHILDREN-BASEL (2019)

Add to Collection

Article Pharmacology & Pharmacy

Continuous inkjet printing of enalapril maleate onto orodispersible film formulations

Yasmin Thabet et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

Add to Collection

Article Pharmacology & Pharmacy

3D extrusion printing of high drug loading immediate release paracetamol tablets

Shaban A. Khaled et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

Add to Collection

Article Pharmacology & Pharmacy

Low temperature fused deposition modeling (FDM) 3D printing of thermolabile drugs

Gayathri Kollamaram et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

Add to Collection

Article Pharmacology & Pharmacy

3D printing of high drug loaded dosage forms using thermoplastic polyurethanes

G. Verstraete et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printed Starmix Drug Loaded Dosage Forms for Paediatric Applications

Nicolaos Scoutaris et al.

PHARMACEUTICAL RESEARCH (2018)

Add to Collection

Article Medicine, General & Internal

PRISMA Extension for Scoping Reviews (PRISMA-ScR): Checklist and Explanation

Andrea C. Tricco et al.

ANNALS OF INTERNAL MEDICINE (2018)

Add to Collection

Review Pharmacology & Pharmacy

Advanced Pharmaceutical Applications of Hot-Melt Extrusion Coupled with Fused Deposition Modelling (FDM) 3D Printing for Personalised Drug Delivery

Deck Khong Tan et al.

PHARMACEUTICS (2018)

Add to Collection

Article Pharmacology & Pharmacy

Colorimetry as Quality Control Tool for Individual Inkjet-Printed Pediatric Formulations

Henrika Wickstrom et al.

AAPS PHARMSCITECH (2017)

Add to Collection

Review Pharmacology & Pharmacy

Paediatric Drug Development and Formulation Design-a European Perspective

Diana A. Van Riet-Nales et al.

AAPS PHARMSCITECH (2017)

Add to Collection

Review Pharmacology & Pharmacy

Evidence of acceptability of oral paediatric medicines: a review

Punam Mistry et al.

JOURNAL OF PHARMACY AND PHARMACOLOGY (2017)

Add to Collection

Article Pharmacology & Pharmacy

Dosage form preference consultation study in children and young adults: paving the way for patient-centred and patient-informed dosage form development

Hamad Alyami et al.

EUROPEAN JOURNAL OF HOSPITAL PHARMACY (2017)

Add to Collection

Article Pediatrics

Manipulating tablets and capsules given to hospitalised children in Norway is common practice

Kathrin Bjerknes et al.

ACTA PAEDIATRICA (2017)

Add to Collection

Review Pharmacology & Pharmacy

3D-Printed Drugs for Children-Are We Ready Yet?

Maren Preis et al.

AAPS PHARMSCITECH (2017)

Add to Collection

Editorial Material Pharmacology & Pharmacy

Pharmacy preparations: Back in the limelight? Pharmacists make up your mind!

Daan J. A. Crommelin et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)

Add to Collection

Article Pharmacology & Pharmacy

Age-appropriate and acceptable paediatric dosage forms: Insights into end-user perceptions, preferences and practices from the Children's Acceptability of Oral Formulations (CALF) Study

Sejal R. Ranmal et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)

Add to Collection

Article Pharmacology & Pharmacy

Application of a colorimetric technique in quality control for printed pediatric orodispersible drug delivery systems containing propranolol hydrochloride

Hossein Vakili et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A Lower Temperature FDM 3D Printing for the Manufacture of Patient-Specific Immediate Release Tablets

Tochukwu C. Okwuosa et al.

PHARMACEUTICAL RESEARCH (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Emergence of 3D Printed Dosage Forms: Opportunities and Challenges

Mohamed A. Alhnan et al.

PHARMACEUTICAL RESEARCH (2016)

Add to Collection

Article Pharmacology & Pharmacy

Randomized Comparative Bioavailability of a Novel Three-Dimensional Printed Fast-Melt Formulation of Levetiracetam Following the Administration of a Single 1000-mg Dose to Healthy Human Volunteers Under Fasting and Fed Conditions

Sophie Boudriau et al.

DRUGS IN R&D (2016)

Add to Collection

Article Pharmacology & Pharmacy

Ink-jet printing versus solvent casting to prepare oral films: Effect on mechanical properties and physical stability

Asma B. M. Buanz et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)

Add to Collection

News Item Medicine, General & Internal

The Printed Pill

Rebecca M. S. J. Voelker

JAMA-JOURNAL OF THE AMERICAN MEDICAL ASSOCIATION (2015)

Add to Collection

Article Pediatrics

Acceptability of Uncoated Mini-Tablets in Neonates-A Randomized Controlled Trial

Viviane Klingmann et al.

JOURNAL OF PEDIATRICS (2015)

Add to Collection

Article Pharmacology & Pharmacy

Regulatory perspectives on acceptability testing of dosage forms in children

Piotr Kozarewicz

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)

Add to Collection

Review Pharmacology & Pharmacy

Pharmacogenetics of taste: turning bitter pills sweet?

Marielle J. Nagtegaal et al.

PHARMACOGENOMICS (2014)

Add to Collection

Article Pediatrics

Acceptability of different oral formulations in infants and preschool children

Diana A. van Riet-Nales et al.

ARCHIVES OF DISEASE IN CHILDHOOD (2013)

Add to Collection

Article Pediatrics

Favorable Acceptance of Mini-Tablets Compared with Syrup: A Randomized Controlled Trial in Infants and Preschool Children

Viviane Klingmann et al.

JOURNAL OF PEDIATRICS (2013)

Add to Collection

Article Pharmacology & Pharmacy

The availability and age-appropriateness of medicines authorized for children in the Netherlands

Diana A. van Riet-Nales et al.

BRITISH JOURNAL OF CLINICAL PHARMACOLOGY (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation of Personalized-dose Salbutamol Sulphate Oral Films with Thermal Ink-Jet Printing

Asma B. M. Buanz et al.

PHARMACEUTICAL RESEARCH (2011)

Add to Collection

Article Pharmacology & Pharmacy

Optimizing Oral Medications for Children

Julie A. Mennella et al.

CLINICAL THERAPEUTICS (2008)

Add to Collection

Review Pharmacology & Pharmacy

Solid dispersions as strategy to improve oral bioavailability of poor water soluble drugs

Teofilo Vasconcelos et al.

DRUG DISCOVERY TODAY (2007)

Add to Collection

Article Pharmacology & Pharmacy

Prevalence of compounding in independent community pharmacy practice

Timothy B. McPherson et al.

JOURNAL OF THE AMERICAN PHARMACISTS ASSOCIATION (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.