Related references
Note: Only part of the references are listed.Functional outcome after single-stage laryngotracheal reconstruction with rib cartilage grafting
Thomas Schweiger et al.
JOURNAL OF THORACIC AND CARDIOVASCULAR SURGERY (2022)
Coaxial Electrohydrodynamic Bioprinting of Pre-vascularized Cell-laden Constructs for Tissue Engineering
Mao Mao et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2021)
Preparation and modification of an embossed nanofibrous materials for robust filtration performance of PM0.2 removal
Eunjoo Koh et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)
A 3D printed three-dimensional centrifugal fluidic system for blood separation
Xianming Qin et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2021)
Designed and fabrication of triple-layered vascular scaffold with microchannels
Qingxi Hu et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2021)
Electrohydrodynamic jet 3D printing in biomedical applications
Yang Wu
ACTA BIOMATERIALIA (2021)
Ultrafast fabrication of Nanofiber-based 3D Macrostructures by 3D electrospinning
Michel Vong et al.
MATERIALS & DESIGN (2021)
Recent Progress on Biodegradable Tissue Engineering Scaffolds Prepared by Thermally-Induced Phase Separation (TIPS)
Reza Zeinali et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)
Tissue-Engineered Vascular Grafts: Emerging Trends and Technologies
Prerak Gupta et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
Multimaterial bioprinting approaches and their implementations for vascular and vascularized tissues
Caner Dikyol et al.
Bioprinting (2021)
Nonglutaraldehyde treated porcine pericardium with good biocompatibility, reduced calcification and improved Anti-coagulation for bioprosthetic heart valve applications
Tao Yu et al.
CHEMICAL ENGINEERING JOURNAL (2021)
A modified 3D printer as a hybrid bioprinting-electrospinning system for use in vascular tissue engineering applications
Faraz Fazal et al.
MEDICAL ENGINEERING & PHYSICS (2021)
Recent advancements in the bioprinting of vascular grafts
Faraz Fazal et al.
BIOFABRICATION (2021)
3D-PRINTING-ASSISTED FABRICATION OF CHITOSAN SCAFFOLDS FROM DIFFERENT SOURCES AND CROSS-LINKERS FOR DENTAL TISSUE ENGINEERING
M. EzEldeen et al.
EUROPEAN CELLS & MATERIALS (2021)
Using Plant Proteins to Develop Composite Scaffolds for Cell Culture Applications
Linzhi Jing et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2021)
Recent Advances in Enabling Technologies in 3D Printing for Precision Medicine
Margaret E. Prendergast et al.
ADVANCED MATERIALS (2020)
3D printing electrospinning fiber-reinforced decellularized extracellular matrix for cartilage regeneration
Weiming Chen et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Electrohydrodynamic printing of sub-microscale fibrous architectures with improved cell adhesion capacity
Bing Zhang et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
Multi-directional cellular alignment in 3D guided by electrohydrodynamically-printed microlattices
Mao Mao et al.
ACTA BIOMATERIALIA (2020)
Micro/nano-hierarchical scaffold fabricated using a cell electrospinning/3D printing process for co-culturing myoblasts and HUVECs to induce myoblast alignment and differentiation
Miji Yeo et al.
ACTA BIOMATERIALIA (2020)
In vivo evaluation of an electrospun and 3D printed cellular delivery device for dermal wound healing
Ryan M. Clohessy et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2020)
A hybrid platform for three-dimensional printing of bone scaffold by combining thermal-extrusion and electrospinning methods
Jianghui Dong et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2020)
Surface modification of PLA 3D-printed implants by electrospinning with enhanced bioactivity and cell affinity
Hadi Saniei et al.
POLYMER (2020)
Fiber reinforced GelMA hydrogel to induce the regeneration of corneal stroma
Bin Kong et al.
NATURE COMMUNICATIONS (2020)
Transplantation of a 3D-printed tracheal graft combined with iPS cell-derived MSCs and chondrocytes
In Gul Kim et al.
SCIENTIFIC REPORTS (2020)
A LEGO inspired fiber probe analytical platform for early diagnosis of Dengue fever
Samira Hosseini et al.
Materials Science & Engineering C-Materials for Biological Applications (2020)
Recent progress in the fabrication techniques of 3D scaffolds for tissue engineering
Mostafa Mabrouk et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Multi-layer Scaffolds of Poly(caprolactone), Poly(glycerol sebacate) and Bioactive Glasses Manufactured by Combined 3D Printing and Electrospinning
Adja B. R. Toure et al.
NANOMATERIALS (2020)
Three-Dimensional Printing and Electrospinning Dual-Scale Polycaprolactone Scaffolds with Low-Density and Oriented Fibers to Promote Cell Alignment
Cian Vyas et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2020)
3D Printing of Well Dispersed Electrospun PLGA Fiber Toughened Calcium Phosphate Scaffolds for Osteoanagenesis
Guoru Zhao et al.
JOURNAL OF BIONIC ENGINEERING (2020)
Optimization of Anti-kinking Designs for Vascular Grafts Based on Supramolecular Materials
Dan Jing Wu et al.
FRONTIERS IN MATERIALS (2020)
Hydrogels for Bioprinting: A Systematic Review of Hydrogels Synthesis, Bioprinting Parameters, and Bioprinted Structures Behavior
Enrique Mancha Sanchez et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)
3D-printing of solvent exchange deposition modeling (SEDM) for a bilayered flexible skin substitute of poly (lactide-co-glycolide) with bioorthogonally engineered EGF
Daqian Gao et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Development of an embossed nanofiber hemodialysis membrane for improving capacity and efficiency via 3D printing and electrospinning technology
Eunjoo Koh et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2020)
A smart scaffold composed of three-dimensional printing and electrospinning techniques and its application in rat abdominal wall defects
Zhi Yang et al.
STEM CELL RESEARCH & THERAPY (2020)
Engineered dual-scale poly (ε-caprolactone) scaffolds using 3D printing and rotational electrospinning for bone tissue regeneration
Boyang Huang et al.
ADDITIVE MANUFACTURING (2020)
Advanced fabrication for electrospun three-dimensional nanofiber aerogels and scaffolds
Yujie Chen et al.
BIOACTIVE MATERIALS (2020)
Biomimetic Polyurethane 3D Scaffolds Based on Polytetrahydrofuran Glycol and Polyethylene Glycol for Soft Tissue Engineering
Kun Luo et al.
POLYMERS (2020)
Merging 3D printing with electrospun biodegradable small-caliber vascular grafts immobilized with VEGF
Gladys A. Emechebe et al.
NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE (2020)
Augmented peripheral nerve regeneration through elastic nerve guidance conduits prepared using a porous PLCL membrane with a 3D printed collagen hydrogel
Jin Yoo et al.
BIOMATERIALS SCIENCE (2020)
Angiogenic factors secreted from human ASC spheroids entrapped in an alginate-based hierarchical structure via combined 3D printing/electrospinning system
Ji-Seon Lee et al.
BIOFABRICATION (2020)
3D Printed and Electrospun, Transparent , Hierarchical Polylactic Acid Mask Nanoporous Filter
Haijun He et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2020)
HBC-nanofiber hydrogel scaffolds with 3D printed internal microchannels for enhanced cartilage differentiation
Xiaoyun Liu et al.
JOURNAL OF MATERIALS CHEMISTRY B (2020)
Dexamethasone loaded bilayered 3D tubular scaffold reduces restenosis at the anastomotic site of tracheal replacement: in vitro and in vivo assessments
Sang Jin Lee et al.
NANOSCALE (2020)
Biodegradable electrospun patch containing cell adhesion or antimicrobial compounds for trachea repair in vivo
Jakob M. Townsend et al.
BIOMEDICAL MATERIALS (2020)
Bioprinting of Multimaterials with Computer-aided Design/Computer-aided Manufacturing
J. M. Lee et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2020)
Tissue-Engineered Trachea Consisting of Electrospun Patterned scPLA/GO-g-IL Fibrous Membranes with Antibacterial Property and 3D-Printed Skeletons with Elasticity
Yuan Kang et al.
BIOMACROMOLECULES (2019)
Progress in the Advancement of Porous Biopolymer Scaffold: Tissue Engineering Application
Rushikesh S. Ambekar et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
Vascular endothelial growth factor immobilized on mussel-inspired three-dimensional bilayered scaffold for artificial vascular graft application: In vitro and in vivo evaluations
Sang Jin Lee et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)
Aligned Scaffolds with Biomolecular Gradients for Regenerative Medicine
Xiaoran Li et al.
POLYMERS (2019)
Fabrication of Designable and Suspended Microfibers via Low-Voltage 3D Micropatterning
Elisabeth L. Gill et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Nanocomposites of PLA containing ZnO nanofibers made by solvent cast 3D printing: Production and characterization
R. C. Nonato et al.
EUROPEAN POLYMER JOURNAL (2019)
Comparing Properties of Variable Pore-Sized 3D-Printed PLA Membrane with Conventional PLA Membrane for Guided Bone/Tissue Regeneration
Hao Yang Zhang et al.
MATERIALS (2019)
Heterotypic Scaffold Design Orchestrates Primary Cell Organization and Phenotypes in Cocultured Small Diameter Vascular Grafts
Tomasz Jungst et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Production and characterization of a novel asymmetric 3D printed construct aimed for skin tissue regeneration
Sonia P. Miguel et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2019)
Additive Manufacturing: Applications and Directions in Photonics and Optoelectronics
Andrea Camposeo et al.
ADVANCED OPTICAL MATERIALS (2019)
Guided Regeneration of Rabbit Calvarial Defects Using Silk Fibroin Nanofiber-Poly(glycolic acid) Hybrid Scaffolds
Byung Nam Kim et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Three-Dimensionally Printed Breast Reconstruction Devices Facilitate Nanostructure Surface-Guided Healthy Lipogenesis
Wooyeol Baek et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Effect of Hierarchical Scaffold Consisting of Aligned dECM Nanofibers and Poly(lactide-co-glycolide) Struts on the Orientation and Maturation of Human Muscle Progenitor Cells
Hyeongjin Lee et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Hierarchically designed bone scaffolds: From internal cues to external stimuli
Yingying Du et al.
BIOMATERIALS (2019)
Nano/microscale topographically designed alginate/PCL scaffolds for inducing myoblast alignment and myogenic differentiation
Miji Yeo et al.
CARBOHYDRATE POLYMERS (2019)
Three-dimensional printed electrospun fiber-based scaffold for cartilage regeneration
Weiming Chen et al.
MATERIALS & DESIGN (2019)
Cervical slide tracheoplasty in adults with laryngotracheal stenosis
Andrew J. Redmann et al.
LARYNGOSCOPE (2019)
Hybrid Additive Microfabrication Scaffold Incorporated with Highly Aligned Nanofibers for Musculoskeletal Tissues
Dilshan Sooriyaarachchi et al.
TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2019)
Evaluation of a poly(lactic-acid) scaffold filled with poly(lactide-co-glycolide)/hydroxyapatite nanofibres for reconstruction of a segmental bone defect in a canine model
Jang Won Yun et al.
VETERINARNI MEDICINA (2019)
Decorating 3D Printed Scaffolds with Electrospun Nanofiber Segments for Tissue Engineering
Ruiquan Li et al.
ADVANCED BIOSYSTEMS (2019)
Development of a flexible 3D printed scaffold with a cell-adhesive surface for artificial trachea
Chi Bum Ahn et al.
BIOMEDICAL MATERIALS (2019)
Integrating 3D cell culture of PC12 cells with microchip-based electrochemical detection
Benjamin T. Mehl et al.
ANALYTICAL METHODS (2019)
Designs and applications of electrohydrodynamic 3D printing
Dajing Gao et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2019)
3D scanning probe nanotomography of tissue spheroid fibroblasts interacting with electrospun polyurethane scaffold
A. E. Efimov et al.
EXPRESS POLYMER LETTERS (2019)
Hybrid Fabrication of Biomimetic Meniscus Scaffold by 3D Printing and Parallel Electrospinning
Dilshan Sooriyaarachchi et al.
47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47) (2019)
Hybrid scaffold comprising of nanofibers and extrusion printed PCL for tissue engineering
Pallabi Pal et al.
MATERIALS TODAY-PROCEEDINGS (2019)
3D bioprinted complex constructs reinforced by hybrid multilayers of electrospun nanofiber sheets
Yeji Yoon et al.
BIOFABRICATION (2019)
Extracellular recordings of bionic engineered cardiac tissue based on a porous scaffold and microelectrode arrays
Xinwei Wei et al.
ANALYTICAL METHODS (2019)
Rapid assembling organ prototypes with controllable cell-laden multi-scale sheets
Qing Gao et al.
BIO-DESIGN AND MANUFACTURING (2019)
3D printed mesh reinforcements enhance the mechanical properties of electrospun scaffolds
Nicholas W. Pensa et al.
BIOMATERIALS RESEARCH (2019)
Novel 3D electrospun polyamide scaffolds prepared by 3D printed collectors and their interaction with chondrocytes
Neda Shah Hosseini et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2018)
Microfluidic blood-plasma separation chip using channel size filtration effect
Ju-Nan Kuo et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2018)
Composite 3D printed scaffold with structured electrospun nanofibers promotes chondrocyte adhesion and infiltration
M. Rampichova et al.
CELL ADHESION & MIGRATION (2018)
Emerging Roles of Electrospun Nanofibers in Cancer Research
Shixuan Chen et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Novel 3D electrospun polyamide scaffolds prepared by 3D printed collectors and their interaction with chondrocytes
Neda Shah Hosseini et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2018)
Nanoscale Resolution 3D Printing with Pin-Modified Electrified Inkjets for Tailorable Nano/Macrohybrid Constructs for Tissue Engineering
Jeong In Kim et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Establishment of a Human iPSC- and Nanofiber-Based Microphysiological Blood-Brain Barrier System
Dianjun Qi et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Melt electrowriting below the critical translation speed to fabricate crimped elastomer scaffolds with non-linear extension behaviour Check for oPdetes mimicking that of ligaments and tendons
Gernot Hochleitner et al.
ACTA BIOMATERIALIA (2018)
Insert-based microfluidics for 3D cell culture with analysis
Chengpeng Chen et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2018)
Triple-Layer Vascular Grafts Fabricated by Combined E-Jet 3D Printing and Electrospinning
Ruiying Huang et al.
ANNALS OF BIOMEDICAL ENGINEERING (2018)
Quickening: Translational design of resorbable synthetic vascular grafts
Chelsea E. T. Stowell et al.
BIOMATERIALS (2018)
Designing a tissue-engineered tracheal scaffold for preclinical evaluation
Cameron A. Best et al.
INTERNATIONAL JOURNAL OF PEDIATRIC OTORHINOLARYNGOLOGY (2018)
Micro and nanotechnologies for bone regeneration: Recent advances and emerging designs
Marzieh Mohammadi et al.
JOURNAL OF CONTROLLED RELEASE (2018)
Combining 3D printing and electrospinning for preparation of pain-relieving wound-dressing materials
T. Maver et al.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2018)
Acoustic separation in plastic microfluidics for rapid detection of bacteria in blood using engineered bacteriophage
P. Dow et al.
LAB ON A CHIP (2018)
Additively manufactured biphasic construct loaded with BMP-2 for vertical bone regeneration: A pilot study in rabbit
Sudheesh P. T. Kumar et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Reinforced Electrospun Polycaprolactone Nanofibers for Tracheal Repair in an In Vivo Ovine Model
Jakob M. Townsend et al.
TISSUE ENGINEERING PART A (2018)
Controlled three-dimensional polystyrene micro- and nano-structures fabricated by three-dimensional electrospinning
M. Vong et al.
RSC ADVANCES (2018)
Biomimetic cellulose/calcium-deficient-hydroxyapatite composite scaffolds fabricated using an electric field for bone tissue engineering
MyoJin Kim et al.
RSC ADVANCES (2018)
Hierarchical Design of Tissue Regenerative Constructs
Jonas C. Rose et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Novel Processing Technique to Produce Three Dimensional Polyvinyl Alcohol/Maghemite Nanofiber Scaffold Suitable for Hard Tissues
Nor Hasrul Akhmal Ngadiman et al.
POLYMERS (2018)
Development of an omentum-cultured oesophageal scaffold reinforced by a 3D-printed ring: feasibility of an in vivo bioreactor
Eun-Jae Chung et al.
ARTIFICIAL CELLS NANOMEDICINE AND BIOTECHNOLOGY (2018)
Layered gelatin/PLLA scaffolds fabricated by electrospinning and 3D printing- for nasal cartilages and subchondral bone reconstruction
Izabella Rajzer et al.
MATERIALS & DESIGN (2018)
Extracellular matrix-based materials for regenerative medicine
George S. Hussey et al.
NATURE REVIEWS MATERIALS (2018)
Solution fibre spinning technique for the fabrication of tuneable decellularised matrix-laden fibres and fibrous micromembranes
Zhaoying Li et al.
ACTA BIOMATERIALIA (2018)
Global cancer statistics 2018: GLOBOCAN estimates of incidence and mortality worldwide for 36 cancers in 185 countries
Freddie Bray et al.
CA-A CANCER JOURNAL FOR CLINICIANS (2018)
Extraction and incorporation of bioactives into protein formulations for food and biomedical applications
Alaitz Etxabide et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)
Quantitative approaches of nanofibers organization for biomedical patterned nanofibrous scaffold by image analysis
Neda Shah Hosseini et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
Multilevel structural stereocomplex polylactic acid/collagen membranes by pattern electrospinning for tissue engineering
Yuan Kang et al.
POLYMER (2018)
Sacrificial Core-Based Electrospinning: A Facile and Versatile Approach to Fabricate Devices for Potential Cell and Tissue Encapsulation Applications
Naresh Kasoju et al.
NANOMATERIALS (2018)
Development of Novel 3-D Printed Scaffolds With Core-Shell Nanoparticles for Nerve Regeneration
Se-Jun Lee et al.
IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING (2017)
Effects of 3D-Printed Polycaprolactone/β-Tricalcium Phosphate Membranes on Guided Bone Regeneration
Jin-Hyung Shim et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2017)
Combination of a biodegradable three-dimensional (3D) - printed cage for mechanical support and nanofibrous membranes for sustainable release of antimicrobial agents for treating the femoral metaphyseal comminuted fracture
Ying-Chao Chou et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Preclinical study of patient-specific cell-free nanofiber tissue-engineered vascular grafts using 3-dimensional printing in a sheep model
Takuma Fukunishi et al.
JOURNAL OF THORACIC AND CARDIOVASCULAR SURGERY (2017)
Serial Analysis of Tracheal Restenosis After 3D-Printed Scaffold Implantation: Recruited Inflammatory Cells and Associated Tissue Changes
Hee-Jin Ahn et al.
TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2017)
Fabrication of a Highly Aligned Neural Scaffold via a Table Top Stereolithography 3D Printing and Electrospinning
Se-Jun Lee et al.
TISSUE ENGINEERING PART A (2017)
Fabrication and Evaluation of Electrospun, 3D-Bioplotted, and Combination of Electrospun/3D-Bioplotted Scaffolds for Tissue Engineering Applications
Liliana F. Mellor et al.
BIOMED RESEARCH INTERNATIONAL (2017)
3D-printed barium titanate/poly-(vinylidene fluoride) nano-hybrids with anisotropic dielectric properties
N. Phatharapeetranun et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
Serial Analysis of Tracheal Restenosis After 3D-Printed Scaffold Implantation: Recruited Inflammatory Cells and Associated Tissue Changes
Hee-Jin Ahn et al.
TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2017)
3D Fabrication of Polymeric Scaffolds for Regenerative Therapy
Greeshma Ratheesh et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Combinational processing of 3D printing and electrospinning of hierarchical poly( lactic acid)/gelatin-forsterite scaffolds as a biocomposite: Mechanical and biological assessment
Saman Naghieh et al.
MATERIALS & DESIGN (2017)
3D Fabrication of Polymeric Scaffolds for Regenerative Therapy
Greeshma Ratheesh et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Electrospinning Complexly-shaped, Resorbable, Bifurcated Vascular Grafts
Raquel Tejeda-Alejandre et al.
3RD CIRP CONFERENCE ON BIOMANUFACTURING (2017)
Mesenchymal stem cells cultivated on scaffolds formed by 3D printed PCL matrices, coated with PLGA electrospun nanofibers for use in tissue engineering
Natasha Maurmann et al.
BIOMEDICAL PHYSICS & ENGINEERING EXPRESS (2017)
Biofabricated soft network composites for cartilage tissue engineering
Onur Bas et al.
BIOFABRICATION (2017)
Vertical Bone Augmentation with an Autogenous Block or Particles in Combination with Guided Bone Regeneration: A Clinical and Histological Preliminary Study in Humans
Isabella Rocchietta et al.
CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH (2016)
Nanofiber-mediated microRNA-126 delivery to vascular endothelial cells for blood vessel regeneration
Fang Zhou et al.
ACTA BIOMATERIALIA (2016)
Perfusion-decellularized skeletal muscle as a three-dimensional scaffold with a vascular network template
Jian Zhang et al.
BIOMATERIALS (2016)
Control of Retinal Ganglion Cell Positioning and Neurite Growth: Combining 3D Printing with Radial Electrospun Scaffolds
Karl E. Kador et al.
TISSUE ENGINEERING PART A (2016)
A Review of Three-Dimensional Printing in Tissue Engineering
Nick A. Sears et al.
TISSUE ENGINEERING PART B-REVIEWS (2016)
Fabrication and characterization of electrospinning/3D printing bone tissue engineering scaffold
Yinxian Yu et al.
RSC ADVANCES (2016)
Strategies for the development of three dimensional scaffolds from piezoelectric poly(vinylidene fluoride)
D. M. Correia et al.
MATERIALS & DESIGN (2016)
Triphasic scaffolds for the regeneration of the bone-ligament interface
G. Criscenti et al.
BIOFABRICATION (2016)
Development of cell-laden 3D scaffolds for efficient engineered skin substitutes by collagen gelation
Hyeon Yoon et al.
RSC ADVANCES (2016)
3D bioprinting of skin: a state-of-the-art review on modelling, materials, and processes
S. Vijayavenkataraman et al.
BIOFABRICATION (2016)
3D Printing onto Unknown Uneven Surfaces
Nils Bausch et al.
IFAC PAPERSONLINE (2016)
Mechanical evaluation of gradient electrospun scaffolds with 3D printed ring reinforcements for tracheal defect repair
Lindsey M. Ott et al.
BIOMEDICAL MATERIALS (2016)
Naturally derived and synthetic scaffolds for skeletal muscle reconstruction
Matthew T. Wolf et al.
ADVANCED DRUG DELIVERY REVIEWS (2015)
Ornamenting 3D printed scaffolds with cell-laid extracellular matrix for bone tissue regeneration
Falguni Pati et al.
BIOMATERIALS (2015)
Preparation of hydrophilic poly(lactic acid) tissue engineering scaffold via (PLA)-(PLA-b-PEG)-(PEG) solution casting and thermal-induced surface structural transformation
Xiaomin Zhu et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2015)
Oxygen diffusion in marine-derived tissue engineering scaffolds
E. Boccardi et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2015)
Asymmetric membranes as ideal wound dressings: An overview on production methods, structure, properties and performance relationship
Patricia I. Morgado et al.
JOURNAL OF MEMBRANE SCIENCE (2015)
3D multi-channel bi-functionalized silk electrospun conduits for peripheral nerve regeneration
T. M. Dinis et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Poly(dopamine) coating of 3D printed poly(lactic acid) scaffolds for bone tissue engineering
Chia-Tze Kao et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Highly aligned nanocomposite scaffolds by electrospinning and electrospraying for neural tissue regeneration
Wei Zhu et al.
NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE (2015)
The Effect of Virtual Reality Distraction on Pain Relief During Dressing Changes in Children with Chronic Wounds on Lower Limbs
Yun Hua et al.
PAIN MANAGEMENT NURSING (2015)
Characterization and preparation of bio-tubular scaffolds for fabricating artificial vascular grafts by combining electrospinning and a 3D printing system
Sang Jin Lee et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)
Trends in the design of nerve guidance channels in peripheral nerve tissue engineering
Valeria Chiono et al.
PROGRESS IN NEUROBIOLOGY (2015)
Mesenchymal Stem Cells and Cutaneous Wound Healing: Current Evidence and Future Potential
M. Isakson et al.
STEM CELLS INTERNATIONAL (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
Investigating the Micro- and Nanostructure of Microfibrous Bio.ompatible Polyurethane Scaffold by Scanning Probe Nanotomography
A. E. Efimov et al.
NANOTECHNOLOGIES IN RUSSIA (2015)
Multiscale fabrication of biomimetic scaffolds for tympanic membrane tissue engineering
Carlos Mota et al.
BIOFABRICATION (2015)
Electrospun Biomimetic Fibrous Scaffold from Shape Memory Polymer of PDLLA-co-TMC for Bone Tissue Engineering
Min Bao et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Electrospun scaffolds for tissue engineering of vascular grafts
Anwarul Hasan et al.
ACTA BIOMATERIALIA (2014)
Microfluidic-Based Generation of Size-Controlled, Biofunctionalized Synthetic Polymer Microgels for Cell Encapsulation
Devon M. Headen et al.
ADVANCED MATERIALS (2014)
3D Biofabrication Strategies for Tissue Engineering and Regenerative Medicine
Piyush Bajaj et al.
ANNUAL REVIEW OF BIOMEDICAL ENGINEERING, VOL 16 (2014)
A mini-review: Cell response to microscale, nanoscale, and hierarchical patterning of surface structure
HoJun Jeon et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2014)
Advanced tissue engineering scaffold design for regeneration of the complex hierarchical periodontal structure
Pedro F. Costa et al.
JOURNAL OF CLINICAL PERIODONTOLOGY (2014)
Scaffolding Biomaterials for Cartilage Regeneration
Zhen Cao et al.
JOURNAL OF NANOMATERIALS (2014)
Micropatterning Electrospun Scaffolds to Create Intrinsic Vascular Networks
Eric M. Jeffries et al.
MACROMOLECULAR BIOSCIENCE (2014)
Bioactive factor delivery strategies from engineered polymer hydrogels for therapeutic medicine
Minh Khanh Nguyen et al.
PROGRESS IN POLYMER SCIENCE (2014)
Approaches for Neural Tissue Regeneration
Loic Binan et al.
STEM CELL REVIEWS AND REPORTS (2014)
Three-Dimensional Aggregates of Mesenchymal Stem Cells: Cellular Mechanisms, Biological Properties, and Applications
Sebastien Sart et al.
TISSUE ENGINEERING PART B-REVIEWS (2014)
Effect of nano- and micro-scale topological features on alignment of muscle cells and commitment of myogenic differentiation
Soumen Jana et al.
BIOFABRICATION (2014)
A novel technique for the production of electrospun scaffolds with tailored three-dimensional micro-patterns employing additive manufacturing
Catherine M. Rogers et al.
BIOFABRICATION (2014)
被撤回的出版物: Experimental orthotopic transplantation of a tissue-engineered oesophagus in rats(Retracted article. See Vol.8, Artn No.15077, 2017) (Publication with Expression of Concern. See vol. 7, 2016)
Sebastian Sjoqvist et al.
NATURE COMMUNICATIONS (2014)
Bone regenerative medicine: classic options, novel strategies, and future directions
Ahmad Oryan et al.
JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH (2014)
Comparable efficacy of silk fibroin with the collagen membranes for guided bone regeneration in rat calvarial defects
Jwa-Young Kim et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2014)
Preclinical and clinical research on bone and cartilage regenerative medicine in oral and maxillofacial region
Tsuyoshi Takato et al.
ORAL SCIENCE INTERNATIONAL (2014)
Angiogenesis and scar formation in healing wounds
Luisa A. DiPietro
CURRENT OPINION IN RHEUMATOLOGY (2013)
Techniques for fabrication and construction of three-dimensional scaffolds for tissue engineering
Tingli Lu et al.
INTERNATIONAL JOURNAL OF NANOMEDICINE (2013)
The Reconstruction of Tibial Metaphyseal Comminution Using Hybrid Frames in Severe Tibial Plafond Fractures
Dimitris Katsenis et al.
JOURNAL OF ORTHOPAEDIC TRAUMA (2013)
Progress on materials and scaffold fabrications applied to esophageal tissue engineering
Qiuxiang Shen et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Bone tissue engineering using 3D printing
Susmita Bose et al.
MATERIALS TODAY (2013)
Advances in peripheral nerve regeneration
Jami Scheib et al.
NATURE REVIEWS NEUROLOGY (2013)
Synthetic biopolymer nanocomposites for tissue engineering scaffolds
Masami Okamoto et al.
PROGRESS IN POLYMER SCIENCE (2013)
The therapeutic potential of IGF-I in skeletal muscle repair
Yao-Hua Song et al.
TRENDS IN ENDOCRINOLOGY AND METABOLISM (2013)
Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications
Tao Xu et al.
BIOFABRICATION (2013)
Dermal fibroblast infiltration of poly(ε-caprolactone) scaffolds fabricated by melt electrospinning in a direct writing mode
Brooke L. Farrugia et al.
BIOFABRICATION (2013)
Short-Term Spheroid Formation Enhances the Regenerative Capacity of Adipose-Derived Stem Cells by Promoting Sternness, Angiogenesis, and Chemotaxis
Nai-Chen Cheng et al.
STEM CELLS TRANSLATIONAL MEDICINE (2013)
A hydrogel derived from decellularized dermal extracellular matrix
Matthew T. Wolf et al.
BIOMATERIALS (2012)
A biphasic scaffold design combined with cell sheet technology for simultaneous regeneration of alveolar bone/periodontal ligament complex
Cedryck Vaquette et al.
BIOMATERIALS (2012)
Esophageal tissue engineering: An in-depth review on scaffold design
J. Y. Tan et al.
BIOTECHNOLOGY AND BIOENGINEERING (2012)
Human macrophages primed with angiogenic factors show dynamic plasticity, irrespective of extracellular matrix components
Diana T. A. Ploeger et al.
IMMUNOBIOLOGY (2012)
Blood separation on microfluidic paper-based analytical devices
Temsiri Songjaroen et al.
LAB ON A CHIP (2012)
Layer-by-Layer Tissue Microfabrication Supports Cell Proliferation In Vitro and In Vivo
Sylvain Catros et al.
TISSUE ENGINEERING PART C-METHODS (2012)
Therapeutic potential of bone marrow-derived mesenchymal stem cells for cutaneous wound healing
Jerry S. Chen et al.
FRONTIERS IN IMMUNOLOGY (2012)
Angiogenesis in ischemic tissue produced by spheroid grafting of human adipose-derived stromal cells
Suk Ho Bhang et al.
BIOMATERIALS (2011)
Scaffolds for bone healing: Concepts, materials and evidence
P. Lichte et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2011)
Biomechanics of the tympanic membrane
G. Volandri et al.
JOURNAL OF BIOMECHANICS (2011)
Bioartificial Oesophagus in the Era of Tissue Engineering
Tigran Poghosyan et al.
JOURNAL OF PEDIATRIC GASTROENTEROLOGY AND NUTRITION (2011)
A lab-on-a-chip for rapid blood separation and quantification of hematocrit and serum analytes
Andrew W. Browne et al.
LAB ON A CHIP (2011)
Pinched flow coupled shear-modulated inertial microfluidics for high-throughput rare blood cell separation
Ali Asgar S. Bhagat et al.
LAB ON A CHIP (2011)
Induction of EPC homing on biofunctionalized vascular grafts for rapid in vivo self-endothelialization - A review of current strategies
Meltem Avci-Adali et al.
BIOTECHNOLOGY ADVANCES (2010)
Management of nerve gaps: Autografts, allografts, nerve transfers, and end-to-side neurorrhaphy
Wilson Z. Ray et al.
EXPERIMENTAL NEUROLOGY (2010)
Validation of human periodontal ligament-derived cells as a reliable source for cytotherapeutic use
Takanori Iwata et al.
JOURNAL OF CLINICAL PERIODONTOLOGY (2010)
Microfluidics for cell separation
Ali Asgar S. Bhagat et al.
MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING (2010)
Aggregation of human mesenchymal stromal cells (MSCs) into 3D spheroids enhances their antiinflammatory properties
Thomas J. Bartosh et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2010)
Combining electrospinning and fused deposition modeling for the fabrication of a hybrid vascular graft
M. Centola et al.
BIOFABRICATION (2010)
A review of vapor grown carbon nanofiber/polymer conductive composites
Mohammed H. Al-Saleh et al.
CARBON (2009)
Patient-Reported Outcomes of Breast Reconstruction after Mastectomy: A Systematic Review
Clara Lee et al.
JOURNAL OF THE AMERICAN COLLEGE OF SURGEONS (2009)
Characterization of the linearly viscoelastlic behavior of human tympanic membrane by nanoindentation
Nitin R. Daphalapurkar et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2009)
Development of dual scale scaffolds via direct polymer melt deposition and electrospinning for applications in tissue regeneration
Suk Hee Park et al.
ACTA BIOMATERIALIA (2008)
Engineering cartilage tissue
Cindy Chung et al.
ADVANCED DRUG DELIVERY REVIEWS (2008)
3D fiber-deposited electrospun integrated scaffolds enhance cartilage tissue formation
Lorenzo Moroni et al.
ADVANCED FUNCTIONAL MATERIALS (2008)
The influence of electrospun aligned poly(ε-caprolactone)/collagen nanofiber meshes on the formation of self-aligned skeletal muscle myotubes
Jin San Choi et al.
BIOMATERIALS (2008)
Electrospun nano-scaled glass fiber reinforcement of Bis-GMA/TEGDMA dental composites
Yi Gao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
Clinical outcomes of vertical bone augmentation to enable dental implant placement: a systematic review
Isabella Rocchietta et al.
JOURNAL OF CLINICAL PERIODONTOLOGY (2008)
Cementum-periodontal ligament complex regeneration using the cell sheet technique
M. Gomez Flores et al.
JOURNAL OF PERIODONTAL RESEARCH (2008)
Hybrid Process for Fabricating 3D Hierarchical Scaffolds Combining Rapid Prototyping and Electrospinning
GeunHyung Kim et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2008)
Rapid prototyping of ceramic lattices for hard tissue scaffolds
Shoufeng Yang et al.
MATERIALS & DESIGN (2008)
Microfluidic chip for blood cell separation and collection based on crossflow filtration
Xing Chen et al.
SENSORS AND ACTUATORS B-CHEMICAL (2008)
Vascularization in tissue engineering
Jeroen Rouwkema et al.
TRENDS IN BIOTECHNOLOGY (2008)
Hydrogel-filled polylactide porous scaffolds for cartilage tissue engineering
Yihong Gong et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2007)
Comparison of the outcomes between open and minimally invasive esophagectomy
Bernard M. Smithers et al.
ANNALS OF SURGERY (2007)
Myocardial regeneration with stem cells:: Pharmacological possibilities for efficacy enhancement
QD Wang et al.
PHARMACOLOGICAL RESEARCH (2006)
Poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds for bone tissue engineering
SS Kim et al.
BIOMATERIALS (2006)
Astrocyte-endothelial interactions at the blood-brain barrier
NJ Abbott et al.
NATURE REVIEWS NEUROSCIENCE (2006)
Exploring and engineering the cell surface interface
MM Stevens et al.
SCIENCE (2005)
Early esophageal cancer - Pattern of lymphatic spread and prognostic factors for long-term survival after surgical resection
HJ Stein et al.
ANNALS OF SURGERY (2005)
Electrospun degradable polyesterurethane membranes: potential scaffolds for skeletal muscle tissue engineering
SA Riboldi et al.
BIOMATERIALS (2005)
Application of periodontal ligament cell sheet for periodontal regeneration: a pilot study in beagle dogs
T Akizuki et al.
JOURNAL OF PERIODONTAL RESEARCH (2005)
Three approaches for estimating the elastic modulus of the tympanic membrane
J Fay et al.
JOURNAL OF BIOMECHANICS (2005)
Fabrication and characterization of hydrophilic poly(lactic-co-glycolic acid)/poly(vinyl alcohol) blend cell scaffolds by melt-molding particulate-leaching method
SH Oh et al.
BIOMATERIALS (2003)
Share Paper
