4.6 Article

Perovskite/Organic Hybrid White Electroluminescent Devices with Stable Spectrum and Extended Operating Lifetime

Related references

Note: Only part of the references are listed.
Review Chemistry, Physical

Metal halide perovskites for light-emitting diodes

Xiao-Ke Liu et al.

Summary: Perovskite emitters have shown promising optoelectronic properties suitable for light-emitting applications, with rapid progress in the development of PeLEDs reaching external quantum efficiencies of over 20%. The key focus is on improving the performance, stability, and reducing toxicity hazards of PeLEDs.

NATURE MATERIALS (2021)

Article Optics

Comprehensive defect suppression in perovskite nanocrystals for high-efficiency light-emitting diodes

Young-Hoon Kim et al.

Summary: In this study, a one-dopant alloying strategy was employed to enhance electroluminescence efficiencies of metal halide perovskite nanocrystals (PNCs) by reducing defect formation and enhancing charge carrier confinement. Surface-stabilizing agents and bromide vacancy healing agents were utilized to decrease defect density and improve carrier confinement, resulting in significant enhancement in performance.

NATURE PHOTONICS (2021)

Article Optics

Efficient and bright white light-emitting diodes based on single-layer heterophase halide perovskites

Jiawei Chen et al.

Summary: Halide perovskite LEDs are a new type of white light-emitting diode that utilizes efficient and low-cost lighting technologies, featuring a single broadband emissive layer without the need for phosphors. These LEDs operate with high peak luminance and external quantum efficiency, with potential for further improvements in the future through advancements in fabrication technology and mechanistic understanding.

NATURE PHOTONICS (2021)

Article Multidisciplinary Sciences

Efficient and bright warm-white electroluminescence from lead-free metal halides

Hong Chen et al.

Summary: By introducing an organic additive into the precursor solutions, trap states can be reduced, enhancing the photoluminescence quantum efficiency of metal halide films and increasing the surface potential to facilitate hole injection and transport in LEDs. Therefore, lead-free metal halide LEDs show high brightness and efficiency, making them promising for solution-processed white LED applications.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Acceptor-Donor-Acceptor-Type Orange-Red Thermally Activated Delayed Fluorescence Materials Realizing External Quantum Efficiency Over 30% with Low Efficiency Roll-Off

Durai Karthik et al.

Summary: Two new orange-red TADF materials, PzTDBA and PzDBA, exhibit high efficiency, low roll-off, and long lifetime. These materials are designed based on the A-D-A molecular configuration, which contributes to their good electronic properties.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Perovskite Light-Emitting Diodes with External Quantum Efficiency Exceeding 22% via Small-Molecule Passivation

Zema Chu et al.

Summary: The functional additive ethoxylated trimethylolpropane triacrylate (ETPTA) can effectively reduce defects in perovskite films, improving the performance of Perovskite light-emitting diodes (PeLEDs) to achieve high external quantum efficiency. These findings provide a simple and effective strategy for producing highly efficient perovskite polycrystalline films and their optoelectronics devices.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Highly Efficient Sky-Blue Perovskite Light-Emitting Diode Via Suppressing Nonradiative Energy Loss

Zhaohua Zhu et al.

Summary: This study presents a highly efficient sky-blue PeLED based on a quasi-two-dimensional structure with an external quantum efficiency of 13.8%. The high efficiency is achieved by suppressing both triplet and trap-assisted nonradiative energy loss using a ligand with high-triplet-energy and dual-functional passivation groups, proposing a universal strategy to improve the efficiency of sky-blue PeLEDs.

CHEMISTRY OF MATERIALS (2021)

Review Chemistry, Multidisciplinary

Thermally activated delayed fluorescence exciplex emitters for high-performance organic light-emitting diodes

Ming Zhang et al.

Summary: Research has shown that exciplex emitters hold great potential for applications in OLEDs, contributing to the development of high-performance TADF emitters. The design principles for efficient TADF exciplex emitters are systematically categorized into three systems, indicating significant progress in this field.

MATERIALS HORIZONS (2021)

Article Chemistry, Multidisciplinary

Co-Interlayer Engineering toward Efficient Green Quasi-Two-Dimensional Perovskite Light-Emitting Diodes

Meng Fanyuan et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Physical

White Electroluminescence from Perovskite-Organic Heterojunction

Nur Fadilah Jamaludin et al.

ACS ENERGY LETTERS (2020)

Article Nanoscience & Nanotechnology

Bipolar-shell resurfacing for blue LEDs based on strongly confined perovskite quantum dots

Yitong Dong et al.

NATURE NANOTECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

Perovskite white light-emitting diodes with a perovskite emissive layer blended with rhodamine 6G

Che-Yu Chang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Article Biochemistry & Molecular Biology

White Light-Emitting Devices Based on Inorganic Perovskite and Organic Materials

Shuming Chen et al.

MOLECULES (2019)

Article Chemistry, Multidisciplinary

Predicting Operational Stability for Organic Light-Emitting Diodes with Exciplex Cohosts

Zhiheng Wang et al.

ADVANCED SCIENCE (2019)

Article Nanoscience & Nanotechnology

White light-emitting devices based on ZnCdS/ZnS and perovskite nanocrystal heterojunction

Congcong Wang et al.

NANOTECHNOLOGY (2019)

Article Materials Science, Multidisciplinary

Perovskite white light-emitting diodes based on a molecular blend perovskite emissive layer

Che-Yu Chang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Article Materials Science, Multidisciplinary

Enhanced performances of planar heterojunction organic light-emitting diodes via diluting an n-type transporter into a carbazole-based matrix

Dongcheng Chen et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Article Chemistry, Multidisciplinary

All-Perovskite Emission Architecture for White Light-Emitting Diodes

Jian Mao et al.

ACS NANO (2018)

Article Chemistry, Multidisciplinary

Lead-Free Highly Efficient Blue-Emitting Cs3Cu2I5 with 0D Electronic Structure

Taehwan Jun et al.

ADVANCED MATERIALS (2018)

Article Materials Science, Multidisciplinary

Hybridization of CsPbBr1.5I1.5 perovskite quantum dots with 9,9-dihexylfluorene co-oligomer for white electroluminescence

Chun-Yuan Huang et al.

ORGANIC ELECTRONICS (2017)

Article Chemistry, Multidisciplinary

High-Brightness Blue and White LEDs based on Inorganic Perovskite Nanocrystals and their Composites

En-Ping Yao et al.

ADVANCED MATERIALS (2017)

Article Chemistry, Multidisciplinary

Efficient and Stable White LEDs with Silica-Coated Inorganic Perovskite Quantum Dots

Chun Sun et al.

ADVANCED MATERIALS (2016)

Review Nanoscience & Nanotechnology

Metal-halide perovskites for photovoltaic and light-emitting devices

Samuel D. Stranks et al.

NATURE NANOTECHNOLOGY (2015)

Article Chemistry, Physical

Thermally Activated Exciton Dissociation and Recombination Control the Carrier Dynamics in Organometal Halide Perovskite

Tom J. Savenije et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Review Chemistry, Multidisciplinary

Transition-metal phosphors with cyclometalating ligands: fundamentals and applications

Yun Chi et al.

CHEMICAL SOCIETY REVIEWS (2010)