Related references
Note: Only part of the references are listed.Effect of segmented cracks on TGO growth and life of thick thermal barrier coating under isothermal oxidation conditions
Mohammad Izadinia et al.
CERAMICS INTERNATIONAL (2020)
A review on failure mechanism of thermal barrier coatings and strategies to extend their lifetime
Ghazanfar Mehboob et al.
CERAMICS INTERNATIONAL (2020)
Damage Assessment and Fracture Resistance of Functionally Graded Advanced Thermal Barrier Coating Systems: Experimental and Analytical Modeling Approach
Amarnath Kumar et al.
COATINGS (2020)
Research Progress of Failure Mechanism of Thermal Barrier Coatings at High Temperature via Finite Element Method
Zhong-Chao Hu et al.
COATINGS (2020)
A Simulation Study on the Crack Propagation Behavior of Nanostructured Thermal Barrier Coatings with Tailored Microstructure
Lei Zhang et al.
COATINGS (2020)
Morphology, Hardness and Wear Properties of Plasma Cladding NiCrCu Coating on M2 High-Speed Steel
Shengwei Zhang et al.
COATINGS (2020)
Sintering behavior of a nanostructured thermal barrier coating deposited using electro-sprayed particles
Chen Xing et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)
La2Zr2O7/LaAlO3 composite prepared by mixing precipitated precursors: Evolution of its structure under sintering
Yu Bespalko et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Effect of Addition of Multimodal YSZ and SiC Powders on the Mechanical Properties of Nanostructured Cr2O3 Plasma-Sprayed Coatings
S. M. Hashemi et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2019)
Thermal barrier coatings: Life model development and validation
Krishna Praveen Jonnalagadda et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Damage progression in thermal barrier coating systems during thermal cycling: A nano-mechanical assessment
Giovanni Bolelli et al.
MATERIALS & DESIGN (2019)
Microstructures and residual strain/stresses of YSZ coatings prepared by plasma spraying
Xuemei Song et al.
MATERIALS LETTERS (2019)
Thermal Cyclic Fatigue Behavior of Nanostructured YSZ/NiCrAlY Compositionally Graded Thermal Barrier Coatings
Arezoo Sezavar et al.
OXIDATION OF METALS (2019)
A novel composite-layered coating enabling self-enhancing thermal barrier performance
Guang-Rong Li et al.
SCRIPTA MATERIALIA (2019)
Thermo-physical and thermal insulation properties of multi-scale nanostructured thermal barrier coatings using as-prepared t′-8YSZ feedstocks
Feifei Zhou et al.
CERAMICS INTERNATIONAL (2019)
Oxidation behavior of a nanostructured compositionally graded layer (CGL) thermal barrier coating (TBC) deposited on IN-738LC
Arezoo Sezavar et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Study on Local Residual Stress in a Nanocrystalline Cr2O3 Coating by Micro-Raman Spectroscopy
Qiu Li et al.
COATINGS (2019)
Thermal shock behavior of multilayer and functionally graded micro- and nano-structured topcoat APS TBCs
A. Ashofteh et al.
CERAMICS INTERNATIONAL (2018)
Strain/sintering co-induced multiscale structural changes in plasma-sprayed thermal barrier coatings
Guang-Rong Li et al.
CERAMICS INTERNATIONAL (2018)
Effect of spraying power on microstructure and property of nanostructured YSZ thermal barrier coatings
Jinshuang Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Bimodal TBCs with low thermal conductivity deposited by a powder-suspension co-spray process
Wei-Wei Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Towards enhanced sintering resistance: Air-plasma-sprayed thermal barrier coating system with porosity gradient
Bowen Lv et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Gradient thermal cyclic behaviour of La2Zr2O7/YSZ DCL-TBCs with equivalent thermal insulation performance
Bo Cheng et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Enhanced Tribological and Bacterial Resistance of Carbon Nanotube with Ceria- and Silver-Incorporated Hydroxyapatite Biocoating
Aditi Pandey et al.
NANOMATERIALS (2018)
Modelling the fracture behaviour of thermal barrier coatings containing healing particles
Jayaprakash Krishnasamy et al.
MATERIALS & DESIGN (2018)
Influences of Cr and Co on the Growth of Thermally Grown Oxide in Thermal Barrier Coating during High-Temperature Exposure
Weifang Zhang et al.
COATINGS (2018)
Comprehensive dynamic failure mechanism of thermal barrier coatings based on a novel crack propagation and TGO growth coupling model
Zhi-Yuan Wei et al.
CERAMICS INTERNATIONAL (2018)
Prolong the durability of La2Zr2O7/YSZ TBCs by decreasing the cracking driving force in ceramic coatings
Bo Cheng et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Residual stresses in single particle splat of metal cold spray process - Numerical simulation and direct measurement
Xu Song et al.
MATERIALS LETTERS (2018)
Plasma sprayed YSZ coatings deposited at different deposition temperatures, part 1: Splats, microstructures, mechanical properties and residual stress
Shuangjian Li et al.
SURFACE & COATINGS TECHNOLOGY (2018)
High temperature oxidation and insulation behavior of plasma-sprayed nanostructured thermal barrier coatings
Feifei Zhou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Thermal plasma technology: The prospective future in material processing
Sneha Samal
JOURNAL OF CLEANER PRODUCTION (2017)
A comprehensive sintering mechanism for TBCs-Part I: An overall evolution with two-stage kinetics
Guangrong Li et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)
Sintering-induced delamination of thermal barrier coatings by gradient thermal cyclic test
Bo Cheng et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)
A study of damage evolution in high purity nano TBCs during thermal cycling: A fracture mechanics based modelling approach
Krishna Praveen Jonnalagadda et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
Life Prediction of Atmospheric Plasma-Sprayed Thermal Barrier Coatings Using Temperature-Dependent Model Parameters
B. Zhang et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
Ceramic Top Coats of Plasma-Sprayed Thermal Barrier Coatings: Materials, Processes, and Properties
Emine Bakan et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
Effects of growth stress in finite-deformation thermally grown oxide on failure mechanism of thermal barrier coatings
Q. Shen et al.
MECHANICS OF MATERIALS (2017)
Thermal shock resistance of bimodal structured thermal barrier coatings by atmospheric plasma spraying using nanostructured partially stabilized zirconia
Deming Yang et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Lanthanum zirconate based thermal barrier coatings: A review
Jing Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Development of YSZ Thermal Barrier Coatings Using Axial Suspension Plasma Spraying
Dapeng Zhou et al.
COATINGS (2017)
Sintering induced the failure behavior of dense vertically crack and lamellar structured TBCs with equivalent thermal insulation performance
Bo Cheng et al.
CERAMICS INTERNATIONAL (2017)
Structural evolution of plasma-sprayed nanoscale 3 mol% and 5 mol% yttria-stabilized zirconia coatings during sintering
Yan Zhao et al.
APPLIED SURFACE SCIENCE (2017)
Phase stability and thermal conductivity of nanostructured tetragonal yttria-stabilized zirconia thermal barrier coatings deposited by air-plasma spraying
Kuo Jiang et al.
CERAMICS INTERNATIONAL (2017)
Comparison of the effect of sintering on the microstructure, micro hardness and phase composition of conventional and nanostructured YSZ TBCs
H. Qazi Lavasani et al.
CERAMICS INTERNATIONAL (2017)
Plasma-sprayed nanostructured YSZ thermal barrier coatings: Thermal insulation capability and adhesion strength
Reza Ghasemi et al.
CERAMICS INTERNATIONAL (2017)
A comprehensive mechanism for the sintering of plasma-sprayed nanostructured thermal barrier coatings
Guang-Rong Li et al.
CERAMICS INTERNATIONAL (2017)
Comparison of thermal insulation capability between conventional and nanostructured plasma sprayed YSZ coating on Ni3Al substrates
Dan Chen et al.
CERAMICS INTERNATIONAL (2017)
Microstructural evolution of plasma sprayed submicron-/nano-zirconia-based thermal barrier coatings
Y. Wang et al.
APPLIED SURFACE SCIENCE (2016)
Effects of sintering and mixed oxide growth on the interface cracking of air-plasma-sprayed thermal barrier coating system at high temperature
Bowen Lv et al.
APPLIED SURFACE SCIENCE (2016)
Review of suspension and solution precursor plasma sprayed thermal barrier coatings
W. Fan et al.
CERAMICS INTERNATIONAL (2016)
Simulation of failure of air plasma sprayed thermal barrier coating due to interfacial and bulk cracks using surface-based cohesive interaction and extended finite element method
S. T. Kyaw et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2016)
Hierarchical Formation of Intrasplat Cracks in Thermal Spray Ceramic Coatings
Lin Chen et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2016)
Deposition of nanostructured YSZ coating from spray-dried particles with no heat treatment
Yan Zhao et al.
APPLIED SURFACE SCIENCE (2015)
Microstructural, mechanical and tribological properties of nanostructured YSZ coatings produced with different APS process parameters
C. Lamuta et al.
CERAMICS INTERNATIONAL (2015)
Thermo-physical properties of rare-earth hexaaluminates LnMgAl11O19 (Ln: La, Pr, Nd, Sm, Eu and Gd) magnetoplumbite for advanced thermal barrier coatings
Lu Haoran et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
Investigation of Crack Propagation Behavior of Atmospheric Plasma-Sprayed Thermal Barrier Coatings under Uniaxial Tension Using the Acoustic Emission Technique
L. Wang et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2015)
Double-Layer Gadolinium Zirconate/Yttria-Stabilized Zirconia Thermal Barrier Coatings Deposited by the Solution Precursor Plasma Spray Process
Chen Jiang et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2015)
Characterization of Plasma Jet in Plasma Spray-Physical Vapor Deposition of YSZ Using a <80 kW Shrouded Torch Based on Optical Emission Spectroscopy
Qing-Yu Chen et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2015)
A Perspective on Plasma Spray Technology
Armelle Vardelle et al.
PLASMA CHEMISTRY AND PLASMA PROCESSING (2015)
Effect of microstructure and phase of nanostructured YSZ thermal barrier coatings on its thermal shock behaviour
M. Pourbafrani et al.
SURFACE ENGINEERING (2015)
Effect of TGO Thickness on Thermal Cyclic Lifetime and Failure Mode of Plasma- Sprayed TBCs
Hui Dong et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)
MCrAlY coating design based on oxidation-diffusion modelling. Part II: Lifing aspects
Robert Eriksson et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Interfacial fracture mechanism associated with mixed oxides growth in thermal barrier coating system
Rong Xu et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Evolution of residual stress in air plasma sprayed yttria stabilised zirconia thermal barrier coatings after isothermal treatment
Lixia Yang et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Predicting failure within TBC system: Finite element simulation of stress within TBC system as affected by sintering of APS TBC, geometry of substrate and creep of TGO
Si Kyaw et al.
ENGINEERING FAILURE ANALYSIS (2013)
Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects
R. Darolia
INTERNATIONAL MATERIALS REVIEWS (2013)
Improved Thermally Grown Oxide Scale in Air Plasma Sprayed NiCrAlY/Nano-YSZ Coatings
Mohammadreza Daroonparvar et al.
JOURNAL OF NANOMATERIALS (2013)
Thermal shock behavior of nanostructured and microstructured thermal barrier coatings on a Fe-based alloy
Changhai Zhou et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Lifetime prediction of plasma-sprayed thermal barrier coating systems
Shen Wei et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Effect of high-temperature aging on the thermal conductivity of nanocrystalline tetragonal yttria-stabilized zirconia
Andi M. Limarga et al.
ACTA MATERIALIA (2012)
The role of formation of continues thermally grown oxide layer on the nanostructured NiCrAlY bond coat during thermal exposure in air
Mohammadreza Daroonparvar et al.
APPLIED SURFACE SCIENCE (2012)
Comparison of thermal shock resistances of plasma-sprayed nano structured and conventional yttria stabilized zirconia thermal barrier coatings
Hossein Jamali et al.
CERAMICS INTERNATIONAL (2012)
Fabrication and Evaluation of Plasma-Sprayed Nanostructured and Conventional YSZ Thermal Barrier Coatings
Hossein Jamali et al.
Current Nanoscience (2012)
A comparison on thermomechanical properties of plasma-sprayed conventional and nanostructured YSZ TBC coatings in thermal cycling
A. Keyvani et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Effect of Thermal Exposure on Mechanical Properties of a Plasma-Sprayed Nanostructured Thermal Barrier Coating
Zilong Wu et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2012)
Thermal-barrier coatings for more efficient gas-turbine engines
David R. Clarke et al.
MRS BULLETIN (2012)
Life approximation of thermal barrier coatings via quantitative microstructural analysis
C. Bargraser et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Influence of pores on the surface microcompression mechanical response of thermal barrier coatings fabricated by atmospheric plasma spray-Finite element simulation
L. Wang et al.
APPLIED SURFACE SCIENCE (2011)
High performance nanostructured ZrO2 based thermal barrier coatings deposited by high efficiency supersonic plasma spraying
Y. Bai et al.
APPLIED SURFACE SCIENCE (2011)
Thermal properties of plasma-sprayed thermal barrier coating with bimodal structure
Qinghe Yu et al.
CERAMICS INTERNATIONAL (2011)
Microstructure, mechanical properties and thermal shock resistance of plasma sprayed nanostructured zirconia coatings
G. Di Girolamo et al.
CERAMICS INTERNATIONAL (2011)
Synthesis of nanocomposites and amorphous alloys by mechanical alloying
C. Suryanarayana et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Engineering a new class of thermal spray nano-based microstructures from agglomerated nanostructured particles, suspensions and solutions: an invited review
P. Fauchais et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2011)
Thermal Cycling Behavior of Thermal Barrier Coatings with HVOF NiCrAlY Bond Coat
L. Y. Ni et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2011)
Microstructure and thermal cycling behavior of nanostructured yttria partially stabilized zirconia (YSZ) thermal barrier coatings
Sun Jie et al.
JOURNAL OF RARE EARTHS (2010)
Structure and Tribological Performance of Nanostructured ZrO2-3 mol% Y2O3 Coatings Deposited by Air Plasma Spraying
B. Liang et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2010)
Effect of Residual Stresses and Prediction of Possible Failure Mechanisms on Thermal Barrier Coating System by Finite Element Method
M. Ranjbar-Far et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2010)
Microstructure and Thermal Properties of Plasma Sprayed Thermal Barrier Coatings from Nanostructured YSZ
Jing Wu et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2010)
Simulation of the effect of material properties and interface roughness on the stress distribution in thermal barrier coatings using finite element method
M. Ranjbar-Far et al.
MATERIALS & DESIGN (2010)
Lifetime of Plasma-Sprayed Thermal Barrier Coatings: Comparison of Numerical and Experimental Results
Robert Vassen et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2009)
Thermal barrier coatings adherence and spallation: Interfacial indentation resistance and cyclic oxidation behaviour under thermal gradient
Julien Sniezewski et al.
SURFACE & COATINGS TECHNOLOGY (2009)
The behavior of high-purity, low-density air plasma sprayed thermal barrier coatings
M. A. Helminiak et al.
SURFACE & COATINGS TECHNOLOGY (2009)
Comparison of thermal shock behaviors between plasma-sprayed nanostructured and conventional zirconia thermal barrier coatings
Liu Chun-bo et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2009)
Microstructure-thermal conductivity relationships for plasma-sprayed yttria-stabilized zirconia coatings
Weiguang Chi et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)
Thermal Failure of Nanostructured Thermal Barrier Coatings with Cold-Sprayed Nanostructured NiCrAlY Bond Coat
Qiang Zhang et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2008)
Toward Highly Sintering-Resistant Nanostructured ZrO2-7wt.%Y2O3 Coatings for TBC Applications by Employing Differential Sintering
R. S. Lima et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2008)
A comparative study on hot corrosion resistance of three types of thermal barrier coatings:: YSZ, YSZ + Al2O3 and YSZ/Al2O3
Abbas Afrasiabi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Nanostructured YSZ thermal barrier coatings engineered to counteract sintering effects
R. S. Lima et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Pre-oxidation and TGO growth behaviour of an air-plasma-sprayed thermal barrier coating
W. R. Chen et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Damage mechanisms, life prediction, and development of EB-PVD thermal barrier coatings for turbine airfoils
Tom Strangman et al.
SURFACE & COATINGS TECHNOLOGY (2007)
Sintering kinetics of plasma-sprayed zirconia TBCs
A. Cipitria et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2007)
Nanostructured lanthanum zirconate coating and its thermal stability properties
Zhao Xiao-Dong et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2007)
On a ferroelastic mechanism governing the toughness of metastable tetragonal-prime (t′) yttria-stabilized zirconia
C. Mercer et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2007)
Comparison of thermal cycling behavior of plasma-sprayed nanostructured and traditional thermal barrier coatings
Chungen Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Nanostructured yttria stabilized zirconia coatings deposited by air plasma spraying
Zhou Hong et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2007)
Application of functionally graded interlayer on reducing the residual stress discontinuities at interfaces within a plasma-sprayed thermal barrier coating
X. C. Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2007)
A physics-based life prediction methodology for thermal barrier coating systems
E. P. Busso et al.
ACTA MATERIALIA (2007)
Thermal spray coatings engineered from nanostructured ceramic agglomerated powders for structural, thermal barrier and biomedical applications: A review
R. S. Lima et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2007)
Heat treatment of nanostructured thermal barrier coating
Na Wang et al.
CERAMICS INTERNATIONAL (2007)
Microstructures and thermal insulation capability of plasma-sprayed nanostructured ceria stabilized zirconia coatings
W. B. Gong et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Evolution of Young's modulus of air plasma sprayed yttria-stabilized zirconia in thermally cycled thermal barrier coatings
F Tang et al.
SCRIPTA MATERIALIA (2006)
Modelling of TBC system failure: Stress distribution as a function of TGO thickness and thermal expansion mismatch
M Martena et al.
ENGINEERING FAILURE ANALYSIS (2006)
Thermal barrier coating materials
David R. Clarke et al.
MATERIALS TODAY (2005)
Studies of the sintering kinetics of thick thermal barrier coatings by thermal diffusivity measurements
F Cernuschi et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2005)
Enhanced ductility in thermally sprayed titania coating synthesized using a nanostructured feedstock
RS Lima et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Synthesis and oxidation behavior of nanocrystalline MCrAlY bond coatings
L Ajdelsztajn et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2005)
Ceramic materials for thermal barrier coatings
XQ Cao et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2004)
Thermal cycling life and thermal diffusivity of a plasma-sprayed nanostructured thermal barrier coating
CG Zhou et al.
SCRIPTA MATERIALIA (2004)
Failure modes in plasma-sprayed thermal barrier coatings
KW Schlichting et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Thermal shock resistance of yttria-stabilized zirconia with Palmqvist indentation cracks
G Fargas et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2003)
Nanostructured zirconia coating prepared by atmospheric plasma spraying
H Chen et al.
SURFACE & COATINGS TECHNOLOGY (2002)
Lanthanum hexaaluminate - novel thermal barrier coatings for gas turbine applications - materials and process development
R Gadow et al.
SURFACE & COATINGS TECHNOLOGY (2002)
Development and implementation of plasma sprayed nanostructured ceramic coatings
M Gell et al.
SURFACE & COATINGS TECHNOLOGY (2001)
Integrity of nanostructured partially stabilized zirconia after plasma spray processing
RS Lima et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Influence of impurity content and porosity of plasma-sprayed yttria-stabilized zirconia layers on the sintering behaviour
R Vassen et al.
SURFACE & COATINGS TECHNOLOGY (2001)
A mechanistic study of oxidation-induced degradation in a plasma-sprayed thermal barrier coating system. Part I: Model formulation
EP Busso et al.
ACTA MATERIALIA (2001)
A mechanistic study of oxidation-induced degradation in a plasma-sprayed thermal barrier coating system. Part II: Life prediction model
EP Busso et al.
ACTA MATERIALIA (2001)
Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings
A Rabiei et al.
ACTA MATERIALIA (2000)
The dependency of microstructure and properties of nanostructured coatings on plasma spray conditions
LL Shaw et al.
SURFACE & COATINGS TECHNOLOGY (2000)
Microstructure of ZrO2 thermal barrier coatings applied by EB-PVD
U Schulz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Share Paper
