4.6 Article

Investigations on the Influence of Annealing on Microstructure and Mechanical Properties of Electrodeposited Ni-Mo and Ni-Mo-W Alloy Coatings

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Impact of annealing temperature on the microstructure, microhardness, tribological properties and corrosion resistance of Ni-Mo/diamond composites

J. H. Liu et al.

Summary: The research analyzes the effects of annealing temperature on the properties of Ni-18 at.% Mo/21 vol% diamond composites, finding that increasing temperature leads to changes in grain size, phase composition, and hardness, affecting wear resistance and corrosion resistance. The presence of Mo2C at 750 degrees C provides lubrication, resulting in the lowest wear rate despite the lowest hardness.

APPLIED SURFACE SCIENCE (2021)

Article Materials Science, Ceramics

Effect of concentration of TiC on the properties of pulse electrodeposited Ni-P-TiC nanocomposite coatings

Khuram Shahzad et al.

Summary: Ni-P/TiC nanocomposite coatings were developed on HSLA substrates through pulse electrodeposition, with different concentrations of TiC nanoparticles. The coatings exhibited improved structural, compositional, mechanical, wear, and electrochemical properties, with Ni-P/0.75TiC composition showing the highest mechanical response and lowest wear rate. The corrosion resistance of Ni-P coatings was substantially increased by incorporating TCNPs, with Ni-P/0.75TiC coatings demonstrating the highest corrosion protection efficiency of 94% in saline water due to the compact structure containing inactive TCNPs in the Ni-P matrix.

CERAMICS INTERNATIONAL (2021)

Review Chemistry, Multidisciplinary

Recent Progress on Wear-Resistant Materials: Designs, Properties, and Applications

Wenzheng Zhai et al.

Summary: This paper comprehensively reviews the recent progress on designs, properties, and applications of wear-resistant materials, focusing on various advanced technologies and strategies. The relationship between material wear resistance and intrinsic properties is discussed, along with challenges and future directions in this critical field.

ADVANCED SCIENCE (2021)

Article Materials Science, Ceramics

Pulse electro co-deposition of submicron-sized TiC reinforced Ni-W coatings: tribological and corrosion properties

Serhat Dilek et al.

Summary: Nickel-Tungsten-Titanium carbide (Ni-W-TiC) coatings were produced by pulse electrodeposition from an electrolyte containing TiC particles. The presence of TiC in the electrolyte improved the mechanical and tribological properties of the coatings, with the highest hardness and modulus of elasticity observed at 15 g/L TiC concentration. The TiC particles also enhanced the electrochemical properties of the coatings due to their barrier effect.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2021)

Review Chemistry, Physical

Development of electrodeposited multilayer coatings: A review of fabrication, microstructure, properties and applications

M. Aliofkhazraei et al.

Summary: The demand for robust engineering materials with good tribological performance under arduous service conditions has driven the development of novel coating materials and techniques. Multilayer structures in surface engineering have attracted great interest, with electrodeposition offering a versatile and controlled route to engineering coatings in tribology. Electrodeposited coatings can provide tailored characteristics and improved load-bearing capability.

APPLIED SURFACE SCIENCE ADVANCES (2021)

Article Chemistry, Physical

Comparing corrosion behavior of Ni and Ni-Mo electroplated coatings in chloride mediums

Sepehr Mosayebi et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

Article Engineering, Industrial

The effect of heat treatment on the microstructural changes in electrodeposited Ni-Mo coatings

Agnieszka Bigos et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

Article Materials Science, Coatings & Films

Mechanical properties and load bearing capability of nanocrystalline nickel-tungsten multilayered coatings

M. H. Allahyarzadeh et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Article Nanoscience & Nanotechnology

Temperature-dependent evolution of strength of nanocrystalline Ni(Mo) alloys at the Mo solubility limit

Jing Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Article Materials Science, Multidisciplinary

Investigations on the structure and properties of nanocrystalline Ni-Mo alloy coatings

J. H. Liu et al.

MATERIALS CHARACTERIZATION (2020)

Article Materials Science, Multidisciplinary

Analytic model for the Orowan dislocation-precipitate bypass mechanism

Benjamin A. Szajewski et al.

MATERIALIA (2020)

Article Chemistry, Physical

Electrodeposition of Ni-Mo/Al2O3 nano-composite coatings at various deposition current densities

Morteza Alizadeh et al.

APPLIED SURFACE SCIENCE (2019)

Review Materials Science, Coatings & Films

Electrodeposition of Ni-P alloy coatings: A review

Aleksandra Lelevic et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Article Materials Science, Coatings & Films

Design and properties investigation of Ni-Mo composite coating reinforced with duplex nanoparticles

Yiku Xu et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Article Materials Science, Coatings & Films

Influence of molybdenum on the mechanical properties, electrochemical corrosion and wear behavior of electrodeposited Ni-Mo alloy

Nitin P. Wasekar et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Article Materials Science, Multidisciplinary

Microstructure and fracture toughness of electrodeposited Ni-21 at.% W alloy thick films

Denise Yin et al.

ACTA MATERIALIA (2018)

Article Materials Science, Coatings & Films

Effect of tungsten on microstructures of annealed electrodeposited Ni-W alloy and its corrosion resistance

Lv Jinlong et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Article Materials Science, Multidisciplinary

The influence of Mo addition on the microstructure and its thermal stability for electrodeposited Ni films

Garima Kapoor et al.

MATERIALS CHARACTERIZATION (2018)

Article Nanoscience & Nanotechnology

Mechanical properties of multilayer Ni-Fe and Ni-Fe-Al2O3 nanocomposite coating

V. Torabinejad et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Article Materials Science, Coatings & Films

Influence of heat treatment on microstructure and mechanical properties of pulse electrodeposited Ni-W alloy coatings

M. V. N. Vamsi et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Article Engineering, Mechanical

Tribological properties of Ni-Fe-Co multilayer coatings fabricated by pulse electrodeposition

V. Torabinejad et al.

TRIBOLOGY INTERNATIONAL (2017)

Article Multidisciplinary Sciences

Nanotwinned metal MEMS films with unprecedented strength and stability

Gi-Dong Sim et al.

SCIENCE ADVANCES (2017)

Article Chemistry, Physical

Electrodeposition and characterization of Ni-Mo-ZrO2 composite coatings

A. Laszczynska et al.

APPLIED SURFACE SCIENCE (2016)

Article Materials Science, Coatings & Films

Ni-W electrodeposited coatings: Characterization, properties and applications

M. H. Allahyarzadeh et al.

SURFACE & COATINGS TECHNOLOGY (2016)

Article Materials Science, Multidisciplinary

Preparation, corrosion, and wear resistance of Ni-Mo/Al composite coating reinforced with Al particles

R. Mousavi et al.

MATERIALS & DESIGN (2016)

Article Engineering, Mechanical

Sliding wear behavior of electrodeposited Ni-W alloy and hard chrome coatings

Nitin P. Wasekar et al.

Article Multidisciplinary Sciences

Charting the complete elastic properties of inorganic crystalline compounds

Maarten de Jong et al.

SCIENTIFIC DATA (2015)

Article Electrochemistry

Induced Codeposition Behavior of Electrodeposited NiMoW Alloys

S. Sun et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Article Materials Science, Multidisciplinary

Grain boundary relaxation strengthening of nanocrystalline Ni-W alloys

Timothy J. Rupert et al.

JOURNAL OF MATERIALS RESEARCH (2012)

Letter Nanoscience & Nanotechnology

The Scherrer equation versus the 'Debye-Scherrer equation'

Uwe Holzwarth et al.

NATURE NANOTECHNOLOGY (2011)

Article Materials Science, Coatings & Films

Electrodeposition of high Mo content amorphous/nanocrystalline Ni-Mo alloys using 1-methyl-imidazolium chloride ionic liquid as an additive

M. H. Allahyarzadeh et al.

SURFACE & COATINGS TECHNOLOGY (2011)

Article Engineering, Electrical & Electronic

Electrodepositing amorphous Ni-W alloys for MEMS

Hong Wang et al.

MICROELECTRONIC ENGINEERING (2010)

Article Materials Science, Multidisciplinary

Tailoring and patterning the grain size of nanocrystalline alloys

Andrew J. Detor et al.

ACTA MATERIALIA (2007)

Article Materials Science, Multidisciplinary

The effect of solid solution W additions on the mechanical properties of nanocrystalline Ni

CA Schuh et al.

ACTA MATERIALIA (2003)