4.7 Article

Optimizing microstructure and mechanical properties of biomedical Mg-Y-Zn-Mn alloy with LPSO phases by solution treatment plus equal-channel angular pressing

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Phases equilibrated with long-period stacking ordered phases in the Mg-rich corner of the Mg-Y-Zn system

Yongxin Ruan et al.

Summary: The experimental investigation of phase equilibria involving the long-period stacking ordered phases including 14H, 18R and 10H in the Mg-rich corner of the Mg-Y-Zn system at 400 and 500 degrees C was conducted using various microscopy techniques. The stable phases and three-phase equilibrium relationships were confirmed, and guidance for alloy composition design was provided based on modified isothermal sections.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Nanoscience & Nanotechnology

Effects of 14H LPSO phase on the dynamic recrystallization and work hardening behaviors of an extruded Mg-Zn-Y-Mn alloy

Jianqiang Hao et al.

Summary: The Mg-Zn-Y-Mn alloys were processed with different heat treatment techniques and extruded, resulting in specimens with and without the 14H LPSO phase. The alloy with 14H LPSO phase showed finer grains and stronger basal texture, leading to higher strength but lower elongation compared to the alloy without 14H LPSO phase. The presence of 14H LPSO phase hindered the nucleation and growth of DRX grains and affected the dynamic recrystallization and work hardening behaviors in extruded alloys.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Article Chemistry, Physical

Microstructure and mechanical properties of extruded Mg-Y-Zn (Ni) alloys

Guang Li Bi et al.

Summary: The microstructure and mechanical properties of extruded Mg-2Y-1Zn, Mg-2Y-0.5Zn-0.5Ni, and Mg-2Y-1Ni alloys were systematically studied, showing the significant influence of different morphologies of LPSO phase on the alloy properties.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Review Metallurgy & Metallurgical Engineering

Recent developments on corrosion behaviors of Mg alloys with stacking fault or long period stacking ordered structures

Yujin Nie et al.

Summary: Corrosion is a major drawback for the wide applications of Mg alloys, with attention being drawn to the corrosion behaviors of alloys with stacking fault or long period stacking ordered structures. However, the corrosion mechanisms of these alloys remain unclear, calling for further research and improvement.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Nanoscience & Nanotechnology

Achieving single-pass high-reduction rolling and enhanced mechanical properties of AZ91 alloy by RD-ECAP pre-processing

Yuhua Li et al.

Summary: By conducting a single-pass high-reduction rolling on AZ91 alloy after pre-homogenization and RD-ECAP pre-processing, the rolled plate exhibited a good combination of high tensile strength, high ductility, and reduced edge cracks. The improved mechanical property is mainly attributed to a typical bimodal grain structure featured with relatively high Schmidt factors of basal slips. The high-pass RD-ECAP preprocessing is applicable to improve plastic formability of hard-to-deform materials like Mg alloys, showing promising prospects for industrial applications.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Review Engineering, Biomedical

The role of rare earth elements in biodegradable metals: A review

Huafang Li et al.

Summary: Biodegradable metals, a new generation of medical metallic materials, degrade completely in the human body, eliminating the need for further surgeries. However, current biodegradable metal systems have limitations in clinical applications. Alloying with Rare Earth elements, known for their unique properties, is considered as an important strategy to enhance the properties of biodegradable metals. Recent research progress on Rare Earth alloying elements in biodegradable metals and their effects on mechanical properties, degradation behavior, and biocompatibility are summarized in detail.

ACTA BIOMATERIALIA (2021)

Article Materials Science, Multidisciplinary

Effect of rolling with different amounts of deformation on microstructure and mechanical properties of the Mg-1Al-4Y alloy

Jinhui Wang et al.

MATERIALS CHARACTERIZATION (2020)

Article Metallurgy & Metallurgical Engineering

Enhanced Electromagnetic Interference Shielding in a Duplex-Phase Mg-9Li-3Al-1Zn Alloy Processed by Accumulative Roll Bonding

Jiahao Wang et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)

Article Materials Science, Multidisciplinary

Effect of Y/Zn ratio on microstructure and properties of as-extruded Mg-Y-Zn alloys

Baosheng Liu et al.

MATERIALS RESEARCH EXPRESS (2020)

Review Metallurgy & Metallurgical Engineering

Latest research advances on magnesium and magnesium alloys worldwide

Jiangfeng Song et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

Article Metallurgy & Metallurgical Engineering

Microstructure characterization and corrosion behavior of Mg-Y-Zn alloys with different long period stacking ordered structures

Lisha Wang et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

Article Nanoscience & Nanotechnology

Combination effects of Yb addition and cryogenic-rolling on microstructure and mechanical properties of LA141 alloy

Siyuan Jin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Article Materials Science, Multidisciplinary

Three-phase strengthening and toughening mechanism of MgY12Zn2.5 magnesium alloys

Wen Liu et al.

MATERIALS LETTERS (2020)

Article Materials Science, Multidisciplinary

Improving toughness of a Mg2Ca-containing Mg-Al-Ca-Mn alloy via refinement and uniform dispersion of Mg2Ca particles

Huan Liu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Nanoscience & Nanotechnology

Dynamic precipitation behavior and mechanical properties of hot-extruded Mg89Y4Zn2Li5 alloys with different extrusion ratio and speed

Wei Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Article Engineering, Mechanical

Influence of solution treatment on the corrosion fatigue behavior of an as forged Mg-Zn-Y-Zr alloy

B. J. Wang et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Review Chemistry, Physical

On the ductility of magnesium based materials: A mini review

Umer Masood Chaudry et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Review Metallurgy & Metallurgical Engineering

Microstructure and Mechanical Properties of Mg-RE-TM Cast Alloys Containing Long Period Stacking Ordered Phases

Huan Liu et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2019)

Article Metallurgy & Metallurgical Engineering

Potential of multi-pass ECAP on improving the mechanical properties of a high-calcium-content Mg-Al-Ca-Mn alloy

He Huang et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2019)

Article Materials Science, Multidisciplinary

What is going on in magnesium alloys?

X. J. Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

Article Nanoscience & Nanotechnology

Effect of TiB2-doping on the microstructure and mechanical properties of Mg-Zn-Y-Mn alloy

Yanbin Ma et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Article Nanoscience & Nanotechnology

Effect of Sn element on the formation of LPSO phase and mechanical properties of Mg-6Y-2Zn alloy

Junjie Gao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Article Materials Science, Coatings & Films

The effects of laser shock peening on the mechanical properties and biomedical behavior of AZ31B magnesium alloy

Ruixia Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Review Materials Science, Multidisciplinary

Structural evolutions of metallic materials processed by severe plastic deformation

Yang Cao et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2018)

Article Metallurgy & Metallurgical Engineering

Fabrication of ultra-high strength magnesium alloys over 540 MPa with low alloying concentration by double continuously extrusion

Hua Huang et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2018)

Review Metallurgy & Metallurgical Engineering

Review of magnesium-based biomaterials and their applications

Nurettin Sezer et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2018)

Article Nanoscience & Nanotechnology

Dynamic precipitation behavior and mechanical property of an Mg94Y4Zn2 alloy prepared by multi-pass successive equal channel angular pressing

Huan Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Article Nanoscience & Nanotechnology

High strength Mg-9Al serial alloy processed by slow extrusion

Jin-wen Kang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Article Nanoscience & Nanotechnology

Effect of Ti addition on the microstructure and mechanical properties of cast Mg-Gd-Y-Zn alloys

Peng Cheng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Review Materials Science, Multidisciplinary

Fundamentals and advances in magnesium alloy corrosion

M. Esmaily et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Article Materials Science, Multidisciplinary

Severely deformed copper by equal channel angular pressing

M. Ebrahimi et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2017)

Article Materials Science, Multidisciplinary

Severely deformed copper by equal channel angular pressing

M. Ebrahimi et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2017)

Article Materials Science, Multidisciplinary

Effect of LPSO structure on mechanical properties and corrosion behavior of as-extruded GZ51K magnesium alloy

Xiaobo Zhang et al.

MATERIALS LETTERS (2016)

Article Nanoscience & Nanotechnology

Effect of route on tensile anisotropy in equal channel angular pressing

Xiaohua Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Article Materials Science, Multidisciplinary

Grain size and texture dependence on mechanical properties, asymmetric behavior and low temperature superplasticity of ZK60 Mg alloy

Ehsan Mostaed et al.

MATERIALS CHARACTERIZATION (2015)

Article Materials Science, Multidisciplinary

Mechanical and bio-corrosion properties of quaternary Mg-Ca-Mn-Zn alloys compared with binary Mg-Ca alloys

H. R. Bakhsheshi-Rad et al.

MATERIALS & DESIGN (2014)

Article Nanoscience & Nanotechnology

ECAP effect on the micro-structure and mechanical properties of AM30 magnesium alloy

Ramin Jahadi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Article Nanoscience & Nanotechnology

Effects of Mn addition and X-phase on the microstructure and mechanical properties of high-strength Mg-Zn-Y-Mn alloys

Fugang Qi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Article Engineering, Biomedical

Biodegradable Mg-Zn-Y alloys with long-period stacking ordered structure: Optimization for mechanical properties

Xu Zhao et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)

Article Materials Science, Multidisciplinary

Biocorrosion behavior and cytotoxicity of a Mg-Gd-Zn-Zr alloy with long period stacking ordered structure

Xiaobo Zhang et al.

MATERIALS LETTERS (2012)

Article Materials Science, Multidisciplinary

Review on long-period stacking-ordered structures in Mg-Zn-RE alloys

Lu Fumin et al.

RARE METALS (2012)

Article Nanoscience & Nanotechnology

Development of high-strength magnesium alloys via combined processes of extrusion, rolling and ageing

R. G. Li et al.

SCRIPTA MATERIALIA (2011)

Article Materials Science, Multidisciplinary

Susceptibility of rare-earth-magnesium alloys to micro-galvanic corrosion

A. E. Coy et al.

CORROSION SCIENCE (2010)

Article Nanoscience & Nanotechnology

Improving both strength and ductility of a Mg alloy through a large number of ECAP passes

Aibin Ma et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Article Nanoscience & Nanotechnology

Principles of grain refinement and superplastic flow in magnesium alloys processed by ECAP

Roberto B. Figueiredo et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Article Nanoscience & Nanotechnology

The building block of long-period structures in Mg-RE-Zn alloys

Y. M. Zhu et al.

SCRIPTA MATERIALIA (2009)

Article Nanoscience & Nanotechnology

Equal-channel angular pressing of magnesium alloy AZ91 and its effects on microstructure and mechanical properties

Bin Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Article Chemistry, Physical

Microstructure and mechanical behavior of AZ91 Mg alloy processed by equal channel angular pressing

K Máthis et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2005)

Article Materials Science, Multidisciplinary

The grain size and texture dependence of tensile properties in extruded Mg-9Al-1Zn

M Mabuchi et al.

MATERIALS TRANSACTIONS (2001)