4.7 Article

Improvement in electrical conductivity characterization of chitosan/Poly (ethylene oxide) incorporated with V2O5 NPs via laser ablation

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Characterization and electrical enhancement of PVP/PVA matrix doped by gold nanoparticles prepared by laser ablation

M. J. Tommalieh et al.

Summary: In this study, a PVP/PVA blend embedded with gold nanoparticles was synthesized using a traditional casting method, and the enhanced electrical conductivity of the blend was evaluated. The structural characterization confirmed the presence of AuNPs, and the conductivity of the blend was increased by raising the ratio of AuNPs.

RADIATION PHYSICS AND CHEMISTRY (2021)

Review Biochemistry & Molecular Biology

Applications of chitosan and chitosan based metallic nanoparticles in agrosciences-A review

Divya Chouhan et al.

Summary: Chitosan, the second most abundant biological macromolecule after cellulose, is a versatile naturally occurring hydrophilic polysaccharide with significant research applications in drug delivery systems and plant growth promotion due to its biocompatibility, biodegradability, and antimicrobial activity. Recent synthetic strategies have focused on coupling various metals with chitosan nanoparticles, particularly silver, copper, zinc, iron, and nickel, which have shown compatibility and non-toxicity in agricultural plant systems. The study highlights the antimicrobial mechanism of nanochitosan on bacteria and fungi, as well as its role in stimulating plant immunity.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Article Chemistry, Physical

Effects of NbC content on microstructural evolution and mechanical properties of laser cladded Fe50Mn30Co10Cr10-xNbC composite coatings

Xiaofeng Li et al.

Summary: This study fabricated NbC reinforced Fe50Mn30Co10Cr10 high entropy alloy coatings with different NbC content by laser cladding, analyzed the formation mechanism and effects of NbC particles at micro/nano scale, and investigated the influence of NbC content on microstructure and mechanical properties of the coatings. It also explored the impact of NbC particles on FCC phase stability and demonstrated significant improvements in micro-hardness and wear resistance with increasing NbC content.

INTERMETALLICS (2021)

Article Chemistry, Physical

Effect of construction angles on microstructure and mechanical properties of AlSi10Mg alloy fabricated by selective laser melting

Xiaofeng Li et al.

Summary: This study investigated the effects of different construction angles on the microstructure and mechanical properties of AlSi10Mg alloys by fabricating seven bulks with different angles using selective laser melting. The results showed that increasing the construction angle changed the laser track segments and affected the grain structure in the vertical planes. The mechanical property anisotropy of the alloy was attributed to various factors such as pores, equiaxed grain structure, ultra-fine equiaxed sub-grains, and working hardening.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Geochemistry & Geophysics

Super-Resolution Mapping Based on Spatial-Spectral Correlation for Spectral Imagery

Peng Wang et al.

Summary: This study introduces a super-resolution mapping method based on spatial-spectral correlation to overcome the influences of imaging conditions on landcover class mapping. By combining spatial and spectral correlations, more accurate mapping results are obtained.

IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING (2021)

Article Acoustics

Design and Fabrication of a Novel Dual-Frequency Confocal Ultrasound Transducer for Microvessels Super-Harmonic Imaging

Xinqi Deng et al.

Summary: A dual-frequency confocal ultrasound transducer has been successfully developed in this study, utilizing special composite materials and a confocal structure to address acoustic issues in microvascular imaging. Experimental results demonstrate that this ultrasound transducer is potentially applicable for future medical imaging of microvessels.

IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2021)

Article Engineering, Manufacturing

Microstructure and mechanical properties of ultrasonic spot welding TiNi/Ti6Al4V dissimilar materials using pure Al coating

Jilin Xie et al.

Summary: Ultrasonic spot welding of dissimilar Ti6Al4V and TiNi SMA joints with an Al coating interlayer was investigated, showing successful joining can be achieved by selecting proper welding pressure. Intermetallic compounds were formed in the joints, and the tensile shear loads varied with welding pressure.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Article Nanoscience & Nanotechnology

Homogeneously Dispersed Graphene Nanoplatelets as Long-Term Corrosion Inhibitors for Aluminum Matrix Composites

Yuming Xie et al.

Summary: Deformation-driven metallurgy was used to prepare graphene nanoplatelet-reinforced aluminum matrix composites, resulting in enhanced corrosion resistance through severe plastic deformation and homogeneously dispersed graphene nanoplatelets. The formation of a carbon-doped protective film in a chloride-containing environment contributed to the great corrosion inhibition mechanism of the composites.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Engineering, Manufacturing

Electrohydrodynamic printing of a dielectric elastomer actuator and its application in tunable lenses

Liang Jiang et al.

Summary: Inspired by the architecture of the human eye, a tunable optical lens with a fully 3D printed inhomogeneous structure was successfully fabricated, exhibiting a 29% change in focal length under dynamic driving voltage control. The lens displayed excellent stability when the focal length was tuned for 200 cycles, mimicking the auto adjusting principle of the human eye and showing potential applications in various fields such as imaging and bifocal technology.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Article Materials Science, Multidisciplinary

Defect engineering of rutile TiO2 ceramics: Route to high voltage stability of colossal permittivity

Yang Yu et al.

Summary: A strategy to enhance the voltage stability of co-doped TiO2 ceramics has been proposed, resulting in the successful design and synthesis of high-performance CP materials (Ta +Al + La) co-doped TiO2, which exhibit colossal permittivity, excellent temperature stability, and outstanding dc bias stability. The results and mechanisms provide a feasible route to design high-performance CP materials via defect engineering.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Graphene oxide fillers through polymeric blends of PVC/PVDF using laser ablation technique: electrical behavior, cell viability, and thermal stability

M. F. H. Abd El-Kader et al.

Summary: Graphene oxide nanoparticles were incorporated into a polymeric blend of PVC and PVDF using pulsed laser ablation technique to fabricate nanocomposite films. The films exhibited rough surfaces with moderate porosity, good thermal stability, and improved cell viability.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Article Chemistry, Multidisciplinary

Synthesis of naked vanadium pentoxide nanoparticles

Patrick Taylor et al.

Summary: This study successfully synthesized naked vanadium pentoxide nanostructures using liquid-phase pulsed laser ablation, achieving a production rate of approximately 10 ppm per minute. The characterization of the alpha-V2O5 and beta-V2O5 nanostructures revealed that the beta-phase displays surface energy close to platinum, with exciton Bohr radii of 3.5 +/- 0.7 nm and 2.0 +/- 0.6 nm for alpha-V2O5 and beta-V2O5 phases, respectively.

NANOSCALE ADVANCES (2021)

Article Biochemistry & Molecular Biology

Synthesis, characterization, and evaluation of antimicrobial activity of novel Chitosan/Tigecycline composite

A. A. Menazea et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Article Food Science & Technology

Fabrication of high stability active nanofibers encapsulated with pomegranate peel extract using chitosan/PEO for meat preservation

Duraiarasan Surendhiran et al.

FOOD PACKAGING AND SHELF LIFE (2020)

Article Materials Science, Multidisciplinary

One-Pot Pulsed Laser Ablation route assisted copper oxide nanoparticles doped in PEO/PVP blend for the electrical conductivity enhancement

A. A. Menazea

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Nanoscience & Nanotechnology

Dual-Phase CsPbCl3-Cs4PbCl6 Perovskite Films for Self-Powered, Visible-Blind UV Photodetectors with Fast Response

Weidong Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Materials Science, Multidisciplinary

Composition and design of nanofibrous scaffolds of Mg/Se- hydroxyapatite/graphene oxide @ ε-polycaprolactone for wound healing applications

M. K. Ahmed et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Materials Science, Multidisciplinary

Antibacterial activity of TiO2 doped ZnO composite synthesized via laser ablation route for antimicrobial application

A. A. Menazea et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Green & Sustainable Science & Technology

Surface morphology assessment of CFRP transverse grinding using CNT nanofluid minimum quantity lubrication

Teng Gao et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Biochemistry & Molecular Biology

Electrochemical Characteristics of Glycerolized PEO-Based Polymer Electrolytes

Muhammad S. Mustafa et al.

MEMBRANES (2020)

Article Chemistry, Physical

Chitosan/graphene oxide composite as an effective removal of Ni, Cu, As, Cd and Pb from wastewater

Abdelrhman A. Menazea et al.

COMPUTATIONAL AND THEORETICAL CHEMISTRY (2020)

Article Engineering, Environmental

Ag doped CuO thin film prepared via pulsed laser deposition for 4-nitrophenol degradation

A. A. Menazea et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Article Materials Science, Multidisciplinary

Core-shell Au@Se nanoparticles embedded in cellulose acetate/polyvinylidene fluoride scaffold for wound healing

Ali Aldalbahi et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Chemistry, Physical

Laser-assisted for preparation ZnO/CdO thin film prepared by pulsed laser deposition for catalytic degradation

Ayman M. Mostafa et al.

RADIATION PHYSICS AND CHEMISTRY (2020)

Article Nanoscience & Nanotechnology

Enhanced Photoresponsivity of a GaAs Nanowire Metal-Semiconductor-Metal Photodetector by Adjusting the Fermi Level

Xue Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Materials Science, Multidisciplinary

Dielectric relaxation in a cadmium chloride-doped polymeric blend

Basavarajeshwari M. Baraker et al.

BULLETIN OF MATERIALS SCIENCE (2019)

Article Physics, Multidisciplinary

Azimuthal Imaginary Poynting Momentum Density

Xiaohao Xu et al.

PHYSICAL REVIEW LETTERS (2019)

Review Chemistry, Multidisciplinary

Device Fabrication Based on Oxidative Chemical Vapor Deposition (oCVD) Synthesis of Conducting Polymers and Related Conjugated Organic Materials

Meysam Heydari Gharahcheshmeh et al.

ADVANCED MATERIALS INTERFACES (2019)

Article Biochemistry & Molecular Biology

Development of electrospun nanofibers containing chitosan/PEO blend and phenolic compounds with antibacterial activity

Suelen Goettems Kuntzler et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

Article Engineering, Electrical & Electronic

Dielectric and electrical characterization of lead-free complex electronic ceramic: (Bi1/2Li1/2)(Zn1/2W1/2)O3

T. Mahapatra et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Article Engineering, Electrical & Electronic

Optical properties of pure and doped PVA:PEO based solid polymer blend electrolytes: two methods for band gap study

Shujahadeen B. Aziz et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2017)

Article Multidisciplinary Sciences

Disinfection of water with new chitosan-modified hybrid clay composite adsorbent

Emmanuel Unuabonah et al.

HELIYON (2017)

Article Chemistry, Physical

A Novel Aluminum-Graphite Dual-Ion Battery

Xiaolong Zhang et al.

ADVANCED ENERGY MATERIALS (2016)

Article Green & Sustainable Science & Technology

Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil

Yanbin Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2015)

Article Physics, Applied

OPTICAL PROPERTIES AND STRUCTURE OF COBALT CHLORIDE DOPED PVA AND ITS BLEND WITH PVP

R. M. Ahmed

INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2014)

Article Chemistry, Multidisciplinary

The mechanism of cysteine detection in biological media by means of vanadium oxide nanoparticles

A. G. Bezerra et al.

JOURNAL OF NANOPARTICLE RESEARCH (2012)

Article Chemistry, Multidisciplinary

Vanadium Oxide Nanoparticles as Optical Sensors of Cysteine

W. Celestino-Santos et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2011)