Related references
Note: Only part of the references are listed.Mechanical performances and microstructures of metakaolin contained UHPC matrix under steam curing conditions
Zongyun Mo et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Chelate effect on fiber surface morphology and its benefits on pullout and tensile behaviors of ultra-high-performance concrete
Doo-Yeol Yoo et al.
CEMENT & CONCRETE COMPOSITES (2021)
Effects of Curing Conditions on the MECHANICAL and Microstructural Properties of Ultra-High-Performance Concrete (UHPC) Incorporating Iron Tailing Powder
Dong Lu et al.
MATERIALS (2021)
Benefits of curvilinear straight steel fibers on the rate-dependent pullout resistance of ultra-high-performance concrete
Jae-Jin Kim et al.
CEMENT & CONCRETE COMPOSITES (2021)
Cryogenic pullout behavior of steel fibers from ultra-high-performance concrete under impact loading
Min-Jae Kim et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Improvement of flexural and tensile strength of layered-casting UHPC with aligned steel fibers
Yang Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Contribution of steel fiber on the dynamic tensile properties of hybrid fiber ultra high toughness cementitious composites using Brazilian test
Xin Zhao et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
The influence of steel fibres on compressive and tensile strength of ultra high performance concrete: A review
Ingrid Lande Larsen et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Comparative pullout behavior of half-hooked and commercial steel fibers embedded in UHPC under static and impact loads
Doo-Yeol Yoo et al.
CEMENT & CONCRETE COMPOSITES (2019)
Hybrid effect of macro and micro steel fibers on the pullout and tensile behaviors of ultra-high-performance concrete
Booki Chun et al.
COMPOSITES PART B-ENGINEERING (2019)
An experimental study on pullout and tensile behavior of ultra-high-performance concrete reinforced with various steel fibers
Doo-Yeol Yoo et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Influence of Hybrid Fiber Reinforcement on Mechanical Properties and Autogenous Shrinkage of an Ecological UHPFRCC
Rui Ma et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)
Predicting the rate effects on hooked-end fiber pullout performance from Ultra-High Performance Concrete (UHPC)
Y. Y. Y. Cao et al.
CEMENT AND CONCRETE RESEARCH (2019)
Dynamic pullout behavior of half-hooked and twisted steel fibers in ultra-high-performance concrete containing expansive agents
Doo-Yeol Yoo et al.
COMPOSITES PART B-ENGINEERING (2019)
Pullout behavior of steel fibers with different shapes from ultra-high performance concrete (UHPC) prepared with granite powder under different curing conditions
Hongru Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effects of fiber shape and distance on the pullout behavior of steel fibers embedded in ultra-high-performance concrete
Jae-Jin Kim et al.
CEMENT & CONCRETE COMPOSITES (2019)
Investigation of mechanical properties and shrinkage of ultra-high performance concrete: Influence of steel fiber content and shape
Zemei Wu et al.
COMPOSITES PART B-ENGINEERING (2019)
Bond-slip response of novel half-hooked steel fibers in ultra-high-performance concrete
Doo-Yeol Yoo et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Property Assessment of Hybrid Fiber-Reinforced Ultra-High-Performance Concrete
Piotr Smarzewski et al.
INTERNATIONAL JOURNAL OF CIVIL ENGINEERING (2018)
How do fiber shape and matrix composition affect fiber pullout behavior and flexural properties of UHPC?
Zemei Wu et al.
CEMENT & CONCRETE COMPOSITES (2018)
Effect of inclination angle on hooked end steel fiber pullout behavior in ultra-high performance concrete
Y. Y. Y. Cao et al.
COMPOSITE STRUCTURES (2018)
Experimental investigation on static and dynamic mechanical properties of steel fiber reinforced ultra-high-strength concretes
Liu Jin et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of Hybrid Fibers on Fresh Properties, Mechanical Properties, and Autogenous Shrinkage of Cost-Effective UHPC
Weina Meng et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2018)
Effect of Steel Fiber on Flexural Toughness and Fracture Mechanics Behavior of Ultrahigh-Performance Concrete with Coarse Aggregate
Lihui Zhang et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2018)
Pullout behavior of straight and hooked-end steel fibers in UHPC matrix with various embedded angles
Jianan Qi et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Bond strength of steel bars embedded in high-performance fiber-reinforced cementitious composite before and after exposure to elevated temperatures
Xiuling Li et al.
FIRE SAFETY JOURNAL (2017)
Microstructural Investigation of Heat-Treated Ultra-High Performance Concrete for Optimum Production
Sung-Hoon Kang et al.
MATERIALS (2017)
Development of cost effective ultra-high-performance fiber-reinforced concrete using single and hybrid steel fibers
Doo-Yeol Yoo et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Effects of fiber shape, aspect ratio, and volume fraction on flexural behavior of ultra-high-performance fiber-reinforced cement composites
Doo-Yeol Yoo et al.
COMPOSITE STRUCTURES (2017)
Factors affecting bond development between Ultra High Performance Concrete (UHPC) and steel bar reinforcement
Mo Alkaysi et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Static and dynamic compressive properties of ultra-high performance concrete (UHPC) with hybrid steel fiber reinforcements
Zemei Wu et al.
CEMENT & CONCRETE COMPOSITES (2017)
Feasibility of Reducing the Fiber Content in Ultra-High-Performance Fiber-Reinforced Concrete under Flexure
Jung-Jun Park et al.
MATERIALS (2017)
Comparative study on flexural properties of ultra-high performance concrete with supplementary cementitious materials under different curing regimes
Zemei Wu et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Bond of Reinforcement in Ultra-High-Performance Concrete
Jiqiu Yuan et al.
ACI STRUCTURAL JOURNAL (2016)
Development of an optimum mixture of ultra-high performance concrete
Shamsad Ahmad et al.
EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2016)
Bond behaviour of reinforcing bars in UHPFRC
Pierre Marchand et al.
MATERIALS AND STRUCTURES (2016)
Effect of loading rates on pullout behavior of high strength steel fibers embedded in ultra-high performance concrete
Man Xu et al.
CEMENT & CONCRETE COMPOSITES (2016)
Strain hardening ultra-high performance fiber reinforced cementitious composites: Effect of fiber type and concentration
Mehmet Gesoglu et al.
COMPOSITES PART B-ENGINEERING (2016)
Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete
Zemei Wu et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Relationship between Flowability, Entrapped Air Content and Strength of UHPC Mixtures Containing Different Dosage of Steel Fiber
Rui Wang et al.
APPLIED SCIENCES-BASEL (2016)
Effects of curing type, silica fume fineness, and fiber length on the mechanical properties and impact resistance of UHPFRC
Hasan Sahan Arel
Results in Physics (2016)
Local bond-slip response of GFRP rebar in ultra-high-performance fiber-reinforced concrete
Doo-Yeol Yoo et al.
COMPOSITE STRUCTURES (2015)
Exploring mechanical and durability properties of ultra-high performance concrete incorporating various steel fiber lengths and dosages
Safeer Abbas et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Effect of shrinkage reducing agent on pullout resistance of high-strength steel fibers embedded in ultra-high-performance concrete
Seung Hun Park et al.
CEMENT & CONCRETE COMPOSITES (2014)
Material and bond properties of ultra high performance fiber reinforced concrete with micro steel fibers
Doo-Yeol Yoo et al.
COMPOSITES PART B-ENGINEERING (2014)
Utilization of Ultra-High Performance Fibre Concrete (UHPFC) for Rehabilitation - a Review
Bassam A. Tayeh et al.
2ND INTERNATIONAL CONFERENCE ON REHABILITATION AND MAINTENANCE IN CIVIL ENGINEERING (ICRMCE) (2013)
Comparative flexural behavior of Hybrid Ultra High Performance Fiber Reinforced Concrete with different macro fibers
Dong Joo Kim et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes
Halit Yazici et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
Share Paper
