Related references
Note: Only part of the references are listed.Fatigue behaviour of FDM-3D printed polymers, polymeric composites and architected cellular materials
Vigneshwaran Shanmugam et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Increased efficiency gyroid structures by tailored material distribution
David Downing et al.
MATERIALS & DESIGN (2021)
Characterisation of void and fiber distribution in 3D printed carbon-fiber/PEEK using X-ray computed tomography
S. Sommacal et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Coupling machine learning with 3D bioprinting to fast track optimisation of extrusion printing *
Kalani Ruberu et al.
APPLIED MATERIALS TODAY (2021)
Waste office paper filled polylactic acid composite filaments for 3D printing
Yubo Tao et al.
COMPOSITES PART B-ENGINEERING (2021)
RSM based investigation of compressive properties of FDM fabricated part
Azhar Equbal et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2021)
An investigation to study the combined effect of different infill pattern and infill density on the impact strength of 3D printed polylactic acid parts
Pradeep Kumar Mishra et al.
COMPOSITES COMMUNICATIONS (2021)
Effect of process parameters on parts quality and process efficiency of fused deposition modeling
Maurizio Galetto et al.
COMPUTERS & INDUSTRIAL ENGINEERING (2021)
Statistical and Experimental Analysis of Process Parameters of 3D Nylon Printed Parts by Fused Deposition Modeling: Response Surface Modeling and Optimization
Mahmoud Moradi et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Semi-crystalline feedstock for filament-based 3D printing of polymers
Dries Vaes et al.
PROGRESS IN POLYMER SCIENCE (2021)
Modeling the Producibility of 3D Printing in Polylactic Acid Using Artificial Neural Networks and Fused Filament Fabrication
Mohammad Saleh Meiabadi et al.
POLYMERS (2021)
Tensile and flexural response of 3D printed solid and porous CCFRPC structures and fracture interface study using image processing technique
Nabeel Maqsood et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Machine learning in predicting mechanical behavior of additively manufactured parts
Sara Nasiri et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Experimental analysis on density, micro-hardness, surface roughness and processing time of Acrylonitrile Butadiene Styrene (ABS) through Fused Deposition Modeling (FDM) using Box Behnken Design (BBD)
Raj Mohan et al.
MATERIALS TODAY COMMUNICATIONS (2021)
Importance of Polymer Rheology on Material Extrusion Additive Manufacturing: Correlating Process Physics to Print Properties
Arit Das et al.
ACS APPLIED POLYMER MATERIALS (2021)
Impact strength of 3D printed PLA using open source FFF-based 3D printer
Shilpesh R. Rajpurohit et al.
PROGRESS IN ADDITIVE MANUFACTURING (2021)
Effect of printing temperature on microstructure, thermal behavior and tensile properties of 3D printed nylon using fused deposition modeling
Sofiane Guessasma et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2021)
The role of heating and cooling in viscous sintering of pairs of spheres and pairs of cylinders
Nickolas D. Polychronopoulos et al.
RAPID PROTOTYPING JOURNAL (2020)
Design of FDM 3D printed polymers: An experimental-modelling methodology for the prediction of mechanical properties
S. Garzon-Hernandez et al.
MATERIALS & DESIGN (2020)
Multi-Material 3D and 4D Printing: A Survey
Mohammad Rafiee et al.
ADVANCED SCIENCE (2020)
Hydrogel Electrolytes Based on Xanthan Gum: Green Route towards Stable Dye-Sensitized Solar Cells
Simone Galliano et al.
NANOMATERIALS (2020)
3D printing technologies: techniques, materials, and post-processing
Ilbey Karakurt et al.
CURRENT OPINION IN CHEMICAL ENGINEERING (2020)
Current status and future directions of fused filament fabrication
Sunpreet Singh et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Fatigue behavior of PLA-wood composite manufactured by fused filament fabrication
J. Antonio Travieso-Rodriguez et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Advances in fused deposition modeling of discontinuous fiber/polymer composites
Chao Hu et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2020)
Investigation of infill-patterns on mechanical response of 3D printed poly-lactic-acid
Bandar Aloyaydi et al.
POLYMER TESTING (2020)
Recent developments in polymers/polymer nanocomposites for additive manufacturing
H. Wu et al.
PROGRESS IN MATERIALS SCIENCE (2020)
Extended CT Void Analysis in FDM Additive Manufacturing Components
Adriana Hernandez-Contreras et al.
MATERIALS (2020)
A critical review on the fused deposition modeling of thermoplastic polymer composites
Pavan Kumar Penumakala et al.
COMPOSITES PART B-ENGINEERING (2020)
Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems
S. C. Daminabo et al.
MATERIALS TODAY CHEMISTRY (2020)
A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts
Zengguang Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Influence of temperature on polymer parts manufactured by fused deposition modeling process
Deep Bhalodi et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)
A case study: Mechanical modeling optimization of cellular structure fabricated using wood flour-filled polylactic acid composites with fused deposition modeling
Yubo Tao et al.
COMPOSITE STRUCTURES (2019)
Microstructure, Thermal and Mechanical Behavior of 3D Printed Acrylonitrile Styrene Acrylate
Sofiane Guessasma et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2019)
Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites
Tuan Noraihan Azila Tuan Rahim et al.
POLYMER REVIEWS (2019)
Fused deposition modeling with polyamide 1012
Xia Gao et al.
RAPID PROTOTYPING JOURNAL (2019)
Prediction of surface roughness in extrusion-based additive manufacturing with machine learning
Zhixiong Li et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2019)
Microstructural design for enhanced shape memory behavior of 4D printed composites based on carbon nanotube/polylactic acid filament
Yang Liu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK
Peng Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Understanding the microstructural role of bio-sourced 3D printed structures on the tensile performance
Sofiane Guessasma et al.
POLYMER TESTING (2019)
Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock
Xianglian Xiao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Effect of Filling Pattern on the Tensile and Flexural Mechanical Properties of FDM 3D Printed Products
B. Akhoundi et al.
EXPERIMENTAL MECHANICS (2019)
3D printing to enable multifunctionality in polymer-based composites: A review
D. G. Bekas et al.
COMPOSITES PART B-ENGINEERING (2019)
Thermal properties of spray-dried cellulose nanofibril-reinforced polypropylene composites from extrusion-based additive manufacturing
Lu Wang et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)
Poplar as Biofiber Reinforcement in Composites for Large-Scale 3D Printing
Xianhui Zhao et al.
ACS APPLIED BIO MATERIALS (2019)
Recent Advances in Extrusion-Based 3D Printing for Biomedical Applications
Jesse K. Placone et al.
ADVANCED HEALTHCARE MATERIALS (2018)
3D printing using concrete extrusion: A roadmap for research
R. A. Buswell et al.
CEMENT AND CONCRETE RESEARCH (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Syed A. M. Tofail et al.
MATERIALS TODAY (2018)
Interlayer diffusion of surface segregating additives to improve the isotropy of fused deposition modeling products
Neiko P. Levenhagen et al.
POLYMER (2018)
Heat distribution in material during fused deposition modelling
Piotr Wolszczak et al.
RAPID PROTOTYPING JOURNAL (2018)
Interlayer adhesion and fracture resistance of polymers printed through melt extrusion additive manufacturing process
Nahal Aliheidari et al.
MATERIALS & DESIGN (2018)
The importance of rheological behavior in the additive manufacturing technique material extrusion
Michael E. Mackay
JOURNAL OF RHEOLOGY (2018)
Experimental study on the 3D-printed plastic parts and predicting the mechanical properties using artificial neural networks
Omer Bayraktar et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2017)
Experimental design and response surface methodology in energy applications: A tutorial review
Mikko Makela
ENERGY CONVERSION AND MANAGEMENT (2017)
Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)
Martin Spoerk et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Bimodal molecular weight samples improve the isotropy of 3D printed polymeric samples
Neiko P. Levenhagen et al.
POLYMER (2017)
Effect of fused layer modeling (FLM) processing parameters on impact strength of cellular polypropylene
Lu Wang et al.
POLYMER (2017)
Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)
Lu Wang et al.
POLYMER (2017)
Influence of processing parameters on creep and recovery behavior of FDM manufactured part using definitive screening design and ANN
Omar Ahmed Mohamed et al.
RAPID PROTOTYPING JOURNAL (2017)
Healing simulation for bond strength prediction of FDM
Timothy J. Coogan et al.
RAPID PROTOTYPING JOURNAL (2017)
Bond and part strength in fused deposition modeling
Timothy J. Coogan et al.
RAPID PROTOTYPING JOURNAL (2017)
Weld formation during material extrusion additive manufacturing
Jonathan E. Seppala et al.
SOFT MATTER (2017)
3D printed highly elastic strain sensors of multiwalled carbon nanotube/thermoplastic polyurethane nanocomposites
Josef F. Christ et al.
MATERIALS & DESIGN (2017)
A review on additive manufacturing of polymer-fiber composites
Pedram Parandoush et al.
COMPOSITE STRUCTURES (2017)
Experimental Optimization of Fused Deposition Modelling Processing Parameters: a Design-for-Manufacturing Approach
Ala'aldin Alafaghani et al.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45) (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
Influence of meso-structure and chemical composition on FDM 3D-printed parts
Gianluca Alaimo et al.
COMPOSITES PART B-ENGINEERING (2017)
Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
Yubo Tao et al.
MATERIALS (2017)
Structural imperfections in additive manufacturing perceived from the X-ray micro-tomography perspective
Hedi Nouri et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques
Michael Dawoud et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
A. Le Duigou et al.
MATERIALS & DESIGN (2016)
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
Fuda Ning et al.
COMPOSITES PART B-ENGINEERING (2015)
Optimization of the printing parameters affecting dimensional accuracy and internal cavity for HIPS material used in fused deposition modeling processes
Mandi Kaveh et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Structure-mechanical property relationship in fused deposition modelling
H. Rezayat et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2015)
Optimization of fused deposition modeling process parameters: a review of current research and future prospects
Omar A. Mohamed et al.
ADVANCES IN MANUFACTURING (2015)
Raster angle mechanics in fused deposition modelling
Bin Huang et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
3D-Printing of Lightweight Cellular Composites
Brett G. Compton et al.
ADVANCED MATERIALS (2014)
Highly oriented carbon fiber-polymer composites via additive manufacturing
Halil L. Tekinalp et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2014)
Multi-material, multi-technology FDM: exploring build process variations
David Espalin et al.
RAPID PROTOTYPING JOURNAL (2014)
Part strength evolution with bonding between filaments in fused deposition modelling This paper studies how coalescence of filaments contributes to the strength of final FDM part
Pavan Kumar Gurrala et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2014)
A Chemometric Approach for the Sensitization Procedure of ZnO Flowerlike Microstructures for Dye-Sensitized Solar Cells
Diego Pugliese et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
A UV-crosslinked polymer electrolyte membrane for quasi-solid dye-sensitized solar cells with excellent efficiency and durability
Federico Bella et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
Experimental design in chromatography: A tutorial review
D. Brynn Hibbert
JOURNAL OF CHROMATOGRAPHY B-ANALYTICAL TECHNOLOGIES IN THE BIOMEDICAL AND LIFE SCIENCES (2012)
Experimental investigation and empirical modelling of FDM process for compressive strength improvement
Anoop K. Sood et al.
JOURNAL OF ADVANCED RESEARCH (2012)
An investigation on sliding wear of FDM built parts
Anoop Kumar Sood et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2012)
Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method
Anoop Kumar Sood et al.
MATERIALS & DESIGN (2009)
Effect of processing conditions on the bonding quality of FDM polymer filaments
Q. Sun et al.
RAPID PROTOTYPING JOURNAL (2008)
Investigation of the mechanical properties and porosity relationships in fused deposition modelling-fabricated porous structures
Ker Chin Ang et al.
RAPID PROTOTYPING JOURNAL (2006)
Mechanical behavior of acrylonitrile butadiene styrene fused deposition materials modeling
JF Rodriguez et al.
RAPID PROTOTYPING JOURNAL (2003)
Mechanical characterization of parts fabricated using fused deposition modeling
A Bellini et al.
RAPID PROTOTYPING JOURNAL (2003)