Related references
Note: Only part of the references are listed.Creep crack growth modelling of Grade 91 vessel weldments using a modified ductility based damage model
Raheeg Ragab et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2022)
Physically-based modeling of cyclic softening and damage behaviors for a martensitic turbine rotor material at elevated temperature
Dao-Hang Li et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
A continuum damage mechanics (CDM) based Wilshire model for creep deformation, damage, and rupture prediction
Jaime A. Cano et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Stress state dependent creep damage behavior of 9-12% Cr steel notched components
Tian-Ye Niu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Modelling of a Grade 91 power plant pressurised header weldment under ultra super-critical creep conditions
R. Ragab et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2021)
Influence of boron nitride inclusions and degradation in creep rupture strength on creep rupture ductility of Gr.122
Fujio Abe
MATERIALS AT HIGH TEMPERATURES (2021)
Crystal plasticity based investigation of micro-void evolution under multi-axial loading conditions
He-Jie Guo et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
On the microstructural evolution in 12% Cr turbine steel during low cycle fatigue at elevated temperature
Y. Rae et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Evaluation of the creep crack growth behavior in 9Cr-1Mo steel under different stress conditions
Yu-Cai Zhang et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2020)
Localised creep cavitation on boron nitride in the heat affected zone of 9% Cr tempered martensitic steel welds
X. Xu et al.
MATERIALS & DESIGN (2020)
Influence of chemical compositions and creep test conditions on UK R5 creep ductility parameter lambda of W-Mo-balanced 9Cr steel
Fujio Abe
MATERIALS AT HIGH TEMPERATURES (2020)
Influence of microstructure on cavitation in the heat affected zone of a Grade 92 steel weld during long-term high temperature creep
X. Xu et al.
MATERIALS CHARACTERIZATION (2020)
Creep damage models and their applications for crack growth analysis in pipes: A review
Qinghua Meng et al.
ENGINEERING FRACTURE MECHANICS (2019)
Creep-Ductility of High Temperature Steels: A Review
Stuart Holdsworth
METALS (2019)
A dislocation-based constitutive model for the cyclic response of nanolath strengthened steels
Cheng Wang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Experimental and numerical analysis of creep and damage behavior of P92 steel by small punch tests
Kai Song et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
Modelling creep-fatigue behaviours using a modified combined kinematic and isotropic hardening model considering the damage accumulation
Lei Zhao et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Microstructural damage mechanics-based model for creep fracture of 9%Cr steel under prior fatigue loading
Wei Zhang et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
The role of small specimen creep testing within a life assessment framework for high temperature power plant
A. Morris et al.
INTERNATIONAL MATERIALS REVIEWS (2018)
Research on elastic-plastic creep damage of notched P92 steel specimens
Yongzhong Ni et al.
MATERIALS AT HIGH TEMPERATURES (2018)
Influence of prior low cycle fatigue on microstructure evolution and subsequent creep behavior
Wei Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
An analytical and numerical approach to multiscale ductility constraint based model to predict uniaxial/multiaxial creep rupture and cracking rates
N. A. Alang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
A void growth model of multiaxial power-law creep rupture involving the void shape changes
Jing-Dong Hu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Influence of prior cyclic plasticity on creep deformation using crystal plasticity modelling
T. O. Erinosho et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)
Microstructural Characterization of the Heat-Affected Zones in Grade 92 Steel Welds: Double-Pass and Multipass Welds
X. Xu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Metallurgical and Stress State Factors Which Affect the Creep and Fracture Behavior of 9% Cr Steels
Jonathan Parker et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)
Creep ductility of 1CrMoV rotor steel
Stuart Holdsworth
MATERIALS AT HIGH TEMPERATURES (2017)
Creep ductility considerations for high energy components manufactured from creep strength enhanced steels
Jonathan Parker
MATERIALS AT HIGH TEMPERATURES (2017)
A unified multiscale ductility exhaustion based approach to predict uniaxial, multiaxial creep rupture and crack growth
K. Nikbin
ENGINEERING FRACTURE MECHANICS (2017)
Experimental and simulated characterization of creep behavior of P92 steel with prior cyclic loading damage
Wei Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)
Creep crack growth behavior analysis of the 9Cr-1Mo steel by a modified creep-damage model
Yu-Cai Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
The Influence of Thermal Cycles on the Microstructure of Grade 92 Steel
X. Xu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Cyclic plasticity of welded P91 material for simple and complex power plant connections
Ming Li et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Evaluation of the creep cavitation behavior in Grade 91 steels
J. A. Siefert et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2016)
Effects of Stress Level and Stress State on Creep Ductility: Evaluation of Different Models
Jian-Feng Wen et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)
Microscale deformation of a tempered martensite ferritic steel: Modelling and experimental study of grain and sub-grain interactions
Brian J. Golden et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)
Effects of creep ductility and notch constraint on creep fracture behavior in notched bar specimens
X. Xu et al.
MATERIALS AT HIGH TEMPERATURES (2016)
Study of creep crack growth in a modified 9Cr-1Mo steel weld metal and heat affected zone
Yatindra Kumar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Modelling the creep behaviour of tempered martensitic steel based on a hybrid approach
Surya Deo Yadav et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The influence of stress-regime dependent creep model and ductility in the prediction of creep crack growth rate in Cr-Mo-V steel
J. W. Zhang et al.
MATERIALS & DESIGN (2015)
Microstructure of 10% Cr martensitic heat-resistant steel welded joints and type IV cracking behavior during creep rupture at 650 °C
Qunbing Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
The effect of multiaxial stress state on creep behavior and fracture mechanism of P92 steel
Yuan Chang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Creep damage assessment for notched bar specimens of a low alloy steel considering stress multiaxiality
Nobuhiro Isobe et al.
ENGINEERING FRACTURE MECHANICS (2014)
A multiaxial creep-damage model for creep crack growth considering cavity growth and microcrack interaction
Jian-Feng Wen et al.
ENGINEERING FRACTURE MECHANICS (2014)
Mechanistic approach for prediction of creep deformation, damage and rupture life of different Cr-Mo ferritic steels
S. Goyal et al.
MATERIALS AT HIGH TEMPERATURES (2014)
Numerical prediction of creep crack growth in different geometries using simplified multiaxial void growth model
M. Yatomi et al.
MATERIALS AT HIGH TEMPERATURES (2014)
Creep life prediction of 9Cr-1Mo steel under multiaxial state of stress
Sunil Goyal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
New model for creep damage analysis and its application to creep crack growth simulations
J. -F. Wen et al.
MATERIALS SCIENCE AND TECHNOLOGY (2014)
Effect of Constraint on Creep Behavior of 9Cr-1Mo Steel
Sunil Goyal et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Influence of Prior Fatigue Cycling on Creep Behavior of Reduced Activation Ferritic-Martensitic Steel
Aritra Sarkar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Creep failure simulations of 316H at 550°C: Part II - Effects of specimen geometry and loading mode
Nak-Hyun Kim et al.
ENGINEERING FRACTURE MECHANICS (2013)
Simulations of creep crack growth in 316 stainless steel using a novel creep-damage model
Jian-Feng Wen et al.
ENGINEERING FRACTURE MECHANICS (2013)
Stress regime-dependent creep constitutive model considerations in finite element continuum damage mechanics
E. Hosseini et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2013)
Creep performance of a grade 91 header
Jonathan Parker et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2013)
The effect of prior cyclic loading variables on the creep behaviour of ex-service Type 316H stainless steel
T. D. Joseph et al.
MATERIALS AT HIGH TEMPERATURES (2013)
Factors affecting Type IV creep damage in Grade 91 steel welds
Jonathan Parker
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Prediction of creep crack growth behavior in ASME P92 steel welded joint
Lei Zhao et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Comparative tensile flow and work hardening behaviour of thin section and forged thick section 9Cr-1Mo ferritic steel in the framework of Voce equation and Kocks-Mecking approach
B. K. Choudhary et al.
JOURNAL OF NUCLEAR MATERIALS (2012)
Creep Rupture Ductility of Creep Strength Enhanced Ferritic Steels
Kazuhiro Kimura et al.
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME (2012)
The Role of Eta Phase Formation on the Creep Strength and Ductility of INCONEL Alloy 740 at 1023 K (750 A°C)
J. P. Shingledecker et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Creep failure simulations of 316H at 550 °C: Part I - A method and validation
Chang-Sik Oh et al.
ENGINEERING FRACTURE MECHANICS (2011)
Comparison of various 9-12%Cr steels under fatigue and creep-fatigue loadings at high temperature
B. Fournier et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Long-term microstructural degradation and creep strength in Gr.91 steel
R. P. Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Microstructural degradation of Gr.91 steel during creep under low stress
K. Sawada et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
The exhaustion of creep ductility in 1CrMoV steel
L. Binda et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2010)
Evolution of dislocation density, size of subgrains and MX-type precipitates in a P91 steel during creep and during thermal ageing at 600°C for more than 100,000 h
Clara Gabriela Panait et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Creep crack growth simulations in 316H stainless steel
Masataka Yatomi et al.
ENGINEERING FRACTURE MECHANICS (2008)
A new methodology for analysis of creep and creep fracture data for 9–12% chromium steels
B. Wilshire et al.
INTERNATIONAL MATERIALS REVIEWS (2008)
Precipitate design for creep strengthening of 9% Cr tempered martensitic steel for ultra-supercritical power plants
Fujio Abe
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2008)
An improved method for calculation of creep damage during creep-fatigue cycling
M. W. Spindler
MATERIALS SCIENCE AND TECHNOLOGY (2007)
Requirements for and use of miniature test specimens to provide mechanical and creep properties of materials: a review
T. H. Hyde et al.
INTERNATIONAL MATERIALS REVIEWS (2007)
Long-term creep life prediction for a high chromium steel
B. Wilshire et al.
SCRIPTA MATERIALIA (2007)
Theoretical and numerical modelling of creep crack growth in a carbon-manganese steel
M Yatomi et al.
ENGINEERING FRACTURE MECHANICS (2006)
Investigation of subsequent viscoplastic deformation of austenitic stainless steel subjected to cyclic preloading
T Mayama et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2006)
US program on materials technology for ultra-supercritical coal power plants
R Viswanathan et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2005)
The prediction of creep damage in type 347 weld metal. Part 1: The determination of material properties from creep and tensile tests
MW Spindler
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2005)
The prediction of creep damage in Type 347 weld metal: Part II creep fatigue tests
MW Spindler
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2005)
Modelling of damage development and failure in notched-bar multiaxial creep tests
M Yatomi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2004)
Finite element analysis of notched bar skeletal point stresses and dimension changes due to creep
GA Webster et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2004)
The multiaxial creep ductility of austenitic stainless steels
MW Spindler
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2004)
The evolution of dislocation density during heat treatment and creep of tempered martensite ferritic steels
J Pesicka et al.
ACTA MATERIALIA (2003)
Relationship between time to reach Monkman-Grant ductility and rupture life
C Phaniraj et al.
SCRIPTA MATERIALIA (2003)
The development of multi-axial creep damage constitutive equations for 0.5Cr0.5Mo0.25V ferritic steel at 590 degrees C
Q Xu et al.
JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING (2003)
Experimental study of biaxial creep damage for type 304 stainless steel
M Sakane et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2002)
Strengthening mechanisms of creep resistant tempered martensitic steel
K Maruyama et al.
ISIJ INTERNATIONAL (2001)
Use of CDM in materials modeling and component creep life prediction
B Dyson
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME (2000)
Share Paper
