4.6 Review

Recent Applications of Carbon Nanotubes in Organic Solar Cells

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

被撤回的出版物: Nanostructures of chemically modified multi-walled carbon nanotubes and poly(3-hexylthiophene) to improve photophysic/photovoltaic features (Retracted article. See vol. 32, pg. 1379, 2022)

Afsaneh Hadi et al.

Summary: In this study, multi-walled carbon nanotube/poly(3-hexylthiophene) and CNT-graft-poly(3-dodecylthiophene)/P3HT nanohybrids were used in the active layers of polymer solar cells to investigate their effects on performance. It was found that the PSC composed of P3HT:PC71BM:CNT-graft-PDDT/P3HT exhibited the highest power conversion efficiency, with significantly increased Jsc and Voc.

CARBON LETTERS (2021)

Article Materials Science, Multidisciplinary

3D surfactant-dispersed graphenes as cathode interfacial materials for organic solar cells

Fei Pan et al.

Summary: Graphene dispersions in low-boiling-point green solvents are widely used in coatings, conducting inks, and solar cells. Two three-dimensional cathode interfacial materials can disperse graphene in ethanol, resulting in improved power conversion efficiency in organic solar cells.

SCIENCE CHINA-MATERIALS (2021)

Article Engineering, Multidisciplinary

Incorporation of carbon nanotubes in photoactive layer of organic solar cells

Danish Khan et al.

Summary: Solar power generation is important among renewable energy resources, with a focus on improving the efficiency and stability of thin-film solar cells, including organic solar cells which are cost-effective and versatile. Carbon nanotubes are being incorporated into organic solar cells to enhance performance, utilizing ultrasound dispersion and covalent functionalization for improved solubility.

AIN SHAMS ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

Recent Advances in Wide Bandgap Polymer Donors and Their Applications in Organic Solar Cells

Xiaopeng Xu et al.

Summary: The research group focuses on the design and synthesis of organic solar cells, exploring the relationship between conjugated molecular structures and photovoltaic properties. The field expert, following the energy crisis and environmental pollution, began to track organic solar cells in 2006 and entered the field in 2007. In supervising students, emphasis is placed on developing students' independent thinking and problem-solving abilities.

CHINESE JOURNAL OF CHEMISTRY (2021)

Article Materials Science, Multidisciplinary

Prospect of Ni-related metal oxides for high-performance supercapacitor electrodes

Yifeng Lin et al.

Summary: Supercapacitors are promising energy-storage systems with high power density, fast charging-discharging rate, and long cyclic stability. Nickel-based oxides, with high specific capacities, are promising candidates, but there are issues such as low conductivity, volume changes, and moderate cycle stability that need to be addressed. Multifunctional structures and ion doping are practical techniques to enhance the supercapacitor performance of these materials.

JOURNAL OF MATERIALS SCIENCE (2021)

Article Materials Science, Multidisciplinary

Synthesis of small molecule dye additive for efficient and DIO-free ternary organic solar cells

Muhammad Naeem Shah et al.

Summary: The ternary approach in organic solar cells involves combining different donors to improve device performance. By adding a molecular donor, the morphology of the active layer and hole mobility can be enhanced, while complementary absorption of different donors contributes to improved performance.

JOURNAL OF MATERIALS SCIENCE (2021)

Review Chemistry, Multidisciplinary

Failing Forward: Stability of Transparent Electrodes Based on Metal Nanowire Networks

Jatin J. Patil et al.

Summary: Metal nanowire-based transparent electrode technologies have matured as a low-cost alternative to ITO, but must overcome stability issues and maintain cost-effectiveness.

ADVANCED MATERIALS (2021)

Review Chemistry, Multidisciplinary

Creation of Highly Efficient and Durable Organic and Perovskite Solar Cells Using Nanocarbon Materials

Yutaka Matsuo

Summary: This article discusses the use of nanocarbon materials (such as carbon nanotubes and fullerene derivatives) to enhance power conversion efficiency and stability of organic and perovskite solar cells. Properly doped carbon nanotubes can replace traditional electrode materials, well-designed fullerene derivatives can serve as electron transporting layers, and lithium-ion endohedral fullerenes can improve stability.

BULLETIN OF THE CHEMICAL SOCIETY OF JAPAN (2021)

Article Chemistry, Physical

Extremely efficient flexible organic solar cells with a graphene transparent anode: Dependence on number of layers and doping of graphene

Jinhong Du et al.

Summary: The study demonstrates the efficient organic solar cells (OSCs) with a 3-layer benzimidazole (BI)-doped graphene transparent anode, achieving a high power conversion efficiency. The graphene anode found the best balance between electrical conductance, transparency, and surface roughness for optimized cell design, highlighting the importance of graphene TCE development for flexible OSCs.

CARBON (2021)

Review Energy & Fuels

Organic solar cells: Current perspectives on graphene-based materials for electrodes, electron acceptors and interfacial layers

Edigar Muchuweni et al.

Summary: Carbon-based materials such as graphene have unique optoelectronic properties that make them appealing for use in organic solar cells, potentially replacing the commonly used indium tin oxide anodes. Recent advancements have increased power conversion efficiency from around 0.63% to over 16.00%, with potential to approach the efficiency of silicon-based solar cells.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Article Energy & Fuels

Hydrothermal synthesis of reduced graphene oxide-anatase titania nanocomposites for dual application in organic solar cells

Hassan O. Shoyiga et al.

Summary: The hydrothermal synthesis of RGOT-92 nanocomposites demonstrated efficient modification of organic solar cells, leading to enhanced photon absorption, improved photoexciton generation, and reduced electron-hole recombination rates.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Article Materials Science, Multidisciplinary

Large area semitransparent inverted organic solar cells with enhanced operational stability using TiO2 electron transport layer for building integrated photovoltaic devices

Dhirendra K. Chaudhary et al.

Summary: The study demonstrates that organic solar cells utilizing TiO2 as the electron transport layer exhibit better device efficiency and durability compared to those using ZnO.

MATERIALS LETTERS (2021)

Article Energy & Fuels

Inverted PTB7-Th:PC71BM organic solar cells with 11.8% PCE via incorporation of gold nanoparticles in ZnO electron transport layer

Belal Usmani et al.

Summary: The incorporation of gold nanoparticles into zinc oxide electron transport layers in organic solar cells can enhance light absorption and improve carrier collection efficiency, ultimately leading to significantly improved device performance.

SOLAR ENERGY (2021)

Article Materials Science, Multidisciplinary

Recently-explored top electrode materials for transparent organic solar cells

Jing-Jing Shen

Summary: Transparent photovoltaics on building surfaces, such as windows and siding, have the potential to revolutionize renewable energy generation. Organic solar cells offer advantages including high absorption coefficients, flexibility, lightweight, and low cost, but require compatible active materials and suitable top conductive electrodes. Research on transparent organic solar cells has shown that materials like transparent conductive oxides, carbon-based conductive polymers, and metallic nanowires can provide high efficiency photovoltaics, promising a more sustainable energy future.

SYNTHETIC METALS (2021)

Review Chemistry, Physical

Recent Progress and Challenges toward Highly Stable Nonfullerene Acceptor-Based Organic Solar Cells

Yiwen Wang et al.

Summary: While organic solar cells based on nonfullerene acceptors have achieved significant breakthroughs in their device performance, achieving long-term stability remains a major challenge for commercialization due to the lack of understanding of their degradation mechanisms and design rules for enhancing stability.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Organic Solar Cells-The Path to Commercial Success

Moritz Riede et al.

Summary: Organic solar cells have the potential to be the cheapest form of electricity, surpassing silicon photovoltaics. However, challenges remain in increasing efficiency and long-term stability. The technology could be used in building integrated photovoltaics and portable electronics, with the potential to have the lowest carbon footprint of all energy generation technologies.

ADVANCED ENERGY MATERIALS (2021)

Review Energy & Fuels

Layer-by-Layer Solution Processing Method for Organic Solar Cells

Xinrui Li et al.

Summary: The layer-by-layer (LbL) solution processing method for organic solar cells (OSCs) is a simple and effective way to fabricate OSCs, achieving high efficiency. It allows for separate adjustment of different layers to optimize performance and has the potential for advancements in large-area device preparation.

SOLAR RRL (2021)

Article Chemistry, Physical

Enhancement of efficiency and stability in organic solar cells by employing MoS2 transport layer, graphene electrode, and graphene quantum dots-added active layer

Dong Hee Shin et al.

Summary: By utilizing new materials such as MoS2 and GQDs, the efficiency and stability of flexible organic solar cells can be improved, leading to better power conversion efficiency and mechanical flexibility.

APPLIED SURFACE SCIENCE (2021)

Article Engineering, Electrical & Electronic

AgNWs-a-TiOx: a scalable wire bar coated core-shell nanocomposite as transparent thin film electrode for flexible electronics applications

S. Arulkumar et al.

Summary: The study introduces transparent and conducting electrodes composed of silver nanowires and amorphous-titanium oxide nanocomposite thin films, which exhibit high transparency, flexibility, and adherence. The core-shell structure of AgNWs-a-TiOx enhances the intra-particle binding and network formation, showing great potential for scalable cost-effective flexible electronic devices.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Review Environmental Sciences

Environmental impacts of solar energy systems: A review

Malek Kamal Hussien Rabaia et al.

Summary: The annual increases in global energy consumption and environmental concerns are driving the massive transmission of sustainable and renewable energy. Solar energy systems have been the focus of attention, but even renewable energies can have adverse environmental impacts. This paper discusses the environmental impacts of various solar energy systems and emphasizes the need for attention and precautionary measures.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Review Engineering, Electrical & Electronic

Review on performance analysis of P3HT:PCBM-based bulk heterojunction organic solar cells

Ishan C. Ghosekar et al.

Summary: Organic solar cells (OSCs) show strong potential in future solar cell technology due to their low production costs, small weight, printability, solution processing, and ability to use flexible substrates. Major specifications for commercializing OSCs include long device lifespan, enhanced environmental stability, and high power conversion efficiency. Developing low energy gap organic polymers, transport materials, and multi-layer system architecture can increase PCE, but challenges remain in achieving environmental stability and longevity.

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Efficient Semi-Transparent Organic Solar Cells with High Color Rendering Index Enabled by Self-Assembled and Knitted AgNPs/MWCNTs Transparent Top Electrode via Solution Process

Yuniu Zhang et al.

Summary: In this study, a solution-processed self-assembled and knitted Ag nanoparticles/multi-walled carbon nanotubes composite thin film was proposed as a transparent top electrode for STOSC, with low sheet resistance and high optical performance. The optimized device achieved moderate visible transmittance and high color rendering index, providing a promising route towards low-cost fabrication of power-generating windows.

ADVANCED OPTICAL MATERIALS (2021)

Review Materials Science, Multidisciplinary

The Role of Carbon Quantum Dots in Organic Photovoltaics: A Short Overview

Barbara Vercelli

Summary: The article introduces the application of carbon quantum dots in organic photovoltaic devices, focusing on studying the role played by these nanomaterials in improving device performance.

COATINGS (2021)

Article Chemistry, Physical

n-doped inorganic molecular clusters as a new type of hole transport material for efficient organic solar cells

Qian Kang et al.

Summary: A new inorganic cluster HPMO:Sn has been developed as a hole transport layer (HTL) in organic solar cells, showing excellent photovoltaic performance with low cost and stable chemical structure. It is also compatible with blade coating process, demonstrating high efficiency in device fabrication.

JOULE (2021)

Article Materials Science, Multidisciplinary

Recent advances of interface engineering for non-fullerene organic solar cells

Li Tian et al.

Summary: This mini-review provides a brief overview of recent developments in interfacial engineering for non-fullerene organic solar cells (NF-OSCs), focusing on the design and application of cathode/anode interface materials for NF-OSCs and interconnecting materials for nonfullerene organic tandem solar cells. The review also offers helpful guidance and challenges regarding interface materials for NF-OSCs.

ORGANIC ELECTRONICS (2021)

Article Chemistry, Multidisciplinary

Multifunctional semitransparent organic solar cells with excellent infrared photon rejection

Xue Li et al.

CHINESE CHEMICAL LETTERS (2020)

Article Nanoscience & Nanotechnology

Composite Interlayer Consisting of Alcohol-Soluble Polyfluorene and Carbon Nanotubes for Efficient Polymer Solar Cells

Seung-Hoon Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Chemistry, Multidisciplinary

Solution-Processed Transparent Electrodes for Emerging Thin-Film Solar Cells

Yaokang Zhang et al.

CHEMICAL REVIEWS (2020)

Article Engineering, Electrical & Electronic

Comparative studies of CdS thin films by chemical bath deposition techniques as a buffer layer for solar cell applications

A. Ashok et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article Energy & Fuels

Organic tandem solar cells with 18.6% efficiency

Muath Bani Salim et al.

SOLAR ENERGY (2020)

Article Chemistry, Multidisciplinary

High Open-Circuit Voltage Organic Photovoltaics Fabricated Using an Alkylidene Fluorene Derivative as a Non-fullerene Acceptor

Seong Lim Lee et al.

BULLETIN OF THE KOREAN CHEMICAL SOCIETY (2020)

Article Engineering, Electrical & Electronic

Improved energy harvesting using well-aligned ZnS nanoparticles in bulk-heterojunction organic solar cell

Mpilo W. Dlamini et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article Engineering, Electrical & Electronic

Enhanced performance of polymer solar cells based on P3HT:PCBM via incorporating Au nanoparticles prepared by the micellar method

Hongli Gao et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Review Chemistry, Multidisciplinary

Progress in Stability of Organic Solar Cells

Duan Leiping et al.

ADVANCED SCIENCE (2020)

Article Chemistry, Multidisciplinary

Recent Progress in Flexible and Stretchable Organic Solar Cells

Jianqiang Qin et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Review Chemistry, Physical

Functionalised graphene as flexible electrodes for polymer photovoltaics

Sourabh Tiwari et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Engineering, Electrical & Electronic

Ionic liquid-modified ZnO-based electron transport layer for inverted organic solar cells

Xiaohan Zhang et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article Materials Science, Multidisciplinary

Comparative study of conventional and inverted P3HT: PCBM organic solar cell

M. Abdallaoui et al.

OPTICAL MATERIALS (2020)

Article Materials Science, Multidisciplinary

CNT/AgNW Multilayer Electrodes on Flexible Organic Solar Cells

Min Kyu Yang et al.

ELECTRONIC MATERIALS LETTERS (2020)

Review Materials Science, Multidisciplinary

Review-State-of-the-Art Organic Solar Cells based on Carbon Nanotubes and Graphene

Jiaqi Wang et al.

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2020)

Review Chemistry, Physical

A critical review on semitransparent organic solar cells

Zhenghao Hu et al.

NANO ENERGY (2020)

Article Energy & Fuels

It's time to focus on organic solar cell stability

Quinn Burlingame et al.

NATURE ENERGY (2020)

Article Materials Science, Multidisciplinary

Bimolecular crystal instability and morphology of bulk heterojunction blends in organic and perovskite solar cells

Jingnan Song et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Article Engineering, Electrical & Electronic

Enhancing the photovoltaic characteristics of organic solar cells by introducing highly conductive graphene as a conductive platform for a PEDOT:PSS anode interfacial layer

Muhammad Hilal et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Article Materials Science, Multidisciplinary

Mesoscopic investigation of the effect of MWCNT/rGO network on the performance of P3HT:PC60BM solar cells

P. C. Mahakul et al.

MATERIALS CHEMISTRY AND PHYSICS (2019)

Article Materials Science, Multidisciplinary

Spray coated europium doped PEDOT:PSS anode buffer layer for organic solar cell: The role of electric field during deposition

Tauheed Mohammad et al.

ORGANIC ELECTRONICS (2019)

Review Chemistry, Multidisciplinary

Polymer Solar Cells-Interfacial Processes Related to Performance Issues

Abhay Gusain et al.

FRONTIERS IN CHEMISTRY (2019)

Article Engineering, Electrical & Electronic

Thermal stability analysis of buffered layer P3HT/P3HT:PCBM organic solar cells

Ishan C. Ghosekar et al.

IET OPTOELECTRONICS (2019)

Article Chemistry, Inorganic & Nuclear

Amino functionalized carbon nanotubes as hole transport layer for high performance polymer solar cells

Xinyang Zhang et al.

INORGANIC CHEMISTRY COMMUNICATIONS (2019)

Article Materials Science, Multidisciplinary

Saturation/unsaturation of P3HT:PC71BM photovoltaics with CNT derivatives and correlated supramolecules

Samira Agbolaghi

ORGANIC ELECTRONICS (2019)

Review Chemistry, Multidisciplinary

Recent Advances in Power-to-X Technology for the Production of Fuels and Chemicals

Bruna Rego de Vasconcelos et al.

FRONTIERS IN CHEMISTRY (2019)

Article Nanoscience & Nanotechnology

Boosting Efficiency and Stability of Organic Solar Cells Using Ultralow-Cost BiOCI Nanoplates as Hole Transporting Layers

Bin Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Energy & Fuels

Building an Organic Solar Cell: Fundamental Procedures for Device Fabrication

Katerina Anagnostou et al.

ENERGIES (2019)

Article Chemistry, Multidisciplinary

Solution-Processed PEDOT:PSS/MoS2 Nanocomposites as Efficient Hole-Transporting Layers for Organic Solar Cells

Madeshwaran Sekkarapatti Ramasamy et al.

NANOMATERIALS (2019)

Article Engineering, Electrical & Electronic

Electrode buffer layers via networks of polythiophene/polyaniline bottlebrushes and carbon nanotubes in organic solar cells

Nafiseh Sorkhishams et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Article Materials Science, Multidisciplinary

Incorporation of g-C3N4/Ag dopant in TiO2 as electron transport layer for organic solar cells

Mohd Fairuz Soh et al.

MATERIALS LETTERS (2019)

Review Polymer Science

Recent Progress in Carbon-Based Buffer Layers for Polymer Solar Cells

Thang Phan Nguyen et al.

POLYMERS (2019)

Editorial Material Chemistry, Physical

Organic Solar Cells: Recent Progress and Challenges

Lin X. Chen

ACS ENERGY LETTERS (2019)

Review Energy & Fuels

Solar energy-A look into power generation, challenges, and a solar-powered future

Muhammad Badar Hayat et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2019)

Article Engineering, Electrical & Electronic

Solution-dispersed copper iodide anode buffer layer gives P3HT:PCBM-based organic solar cells an efficiency boost

Eng Liang Lim et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Article Materials Science, Multidisciplinary

Atomic layer deposition of ZnO electron transporting layers directly onto the active layer of organic solar cells

Hadar Frankenstein et al.

ORGANIC ELECTRONICS (2019)

Review Chemistry, Physical

Single-Walled Carbon Nanotubes in Emerging Solar Cells: Synthesis and Electrode Applications

Il Jeon et al.

ADVANCED ENERGY MATERIALS (2019)

Review Physics, Multidisciplinary

Silicon solar cells: toward the efficiency limits

Lucio Claudio Andreani et al.

ADVANCES IN PHYSICS-X (2019)

Article Nanoscience & Nanotechnology

Applications of carbon nanotubes and graphene for third-generation solar cells and fuel cells

Jianyong Ouyang

NANO MATERIALS SCIENCE (2019)

Article Engineering, Electrical & Electronic

Flexible organic photovoltaics based on water-processed silver nanowire electrodes

Yanna Sun et al.

NATURE ELECTRONICS (2019)

Review Polymer Science

Recent Development in ITO-free Flexible Polymer Solar Cells

Shudi Lu et al.

POLYMERS (2018)

Article Chemistry, Physical

ZnO:CNT assisted charge transport in PTB7:PCBM blend organic solar cell

Saheed O. Oseni et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Engineering, Electrical & Electronic

Efficient P3HT:SWCNTs hybrids as hole transport layer in P3HT:PCBM organic solar cells

Burak Y. Kadem et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Article Engineering, Electrical & Electronic

Rutile TiO2 films as electron transport layer in inverted organic solar cell

Mohammed K. Al-hashimi et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Article Engineering, Electrical & Electronic

Screen printed PEDOT:PSS films as transparent electrode and its application in organic solar cells on opaque substrates

L. Sowjanya Pali et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Review Chemistry, Physical

Organic solar cells based on non-fullerene acceptors

Jianhui Hou et al.

NATURE MATERIALS (2018)

Article Materials Science, Multidisciplinary

2D/2D vanadyl phosphate (VP) on reduced graphene oxide as a hole transporting layer for efficient organic solar cells

Ye-Jin Jeon et al.

ORGANIC ELECTRONICS (2018)

Review Green & Sustainable Science & Technology

Fundamentals of bulk heterojunction organic solar cells: An overview of stability/degradation issues and strategies for improvement

Saqib Rafique et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Review Nanoscience & Nanotechnology

A Review of the Challenges and Possibilities of Using Carbon Nanotubes in Organic Solar Cells

Danish Khan et al.

SCIENCE OF ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

All-Carbon Electrodes for Flexible Solar Cells

Zexia Zhang et al.

APPLIED SCIENCES-BASEL (2018)

Review Chemistry, Multidisciplinary

Single-Walled Carbon Nanotubes in Solar Cells

Il Jeon et al.

TOPICS IN CURRENT CHEMISTRY (2018)

Article Chemistry, Physical

Organic Photovoltaics with Stacked Graphene Anodes

Ehsan Keyvani-Someh et al.

ACS APPLIED ENERGY MATERIALS (2018)

Article Chemistry, Physical

Laminated Carbon Nanotubes for the Facile Fabrication of Cost-Effective Polymer Solar Cells

Abid Ali et al.

ACS APPLIED ENERGY MATERIALS (2018)

Review Materials Science, Multidisciplinary

Graphene for Thermoelectric Applications: Prospects and Challenges

Tabitha A. Amollo et al.

CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2018)

Review Engineering, Electrical & Electronic

Improved performance of inverted organic solar cells by using La-doped TiO2 film as electron transport layer

Jianbin Sun et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2017)

Article Chemistry, Physical

Stability of Organic Solar Cells: The Influence of Nanostructured Carbon Materials

Isabel Fraga Dominguez et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Physical

Zinc oxide doped single wall carbon nanotubes in hole transport buffer layer

Xolani G. Mbuyise et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Article Chemistry, Multidisciplinary

Low temperature synthesis of multiwalled carbon nanotubes and incorporation into an organic solar cell

Kudzai Mugadza et al.

JOURNAL OF EXPERIMENTAL NANOSCIENCE (2017)

Article Chemistry, Physical

Carbon Nanotubes versus Graphene as Flexible Transparent Electrodes in Inverted Perovskite Solar Cells

Il Jeon et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)

Article Energy & Fuels

Properties of functional layers in inverted thin film organic solar cells

Saheed O. Oseni et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)

Article Chemistry, Multidisciplinary

Functionalized carbon nanotube doping of P3HT: PCBM photovoltaic devices for enhancing short circuit current and efficiency

Rohit Bhatia et al.

JOURNAL OF SAUDI CHEMICAL SOCIETY (2017)

Article Materials Science, Multidisciplinary

Indium Tin Oxide-Free Small Molecule Organic Solar Cells Using Single-Walled Carbon Nanotube Electrodes

Clement Delacou et al.

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2017)

Article Multidisciplinary Sciences

Inkjet printing of NiO films and integration as hole transporting layers in polymer solar cells

Arjun Singh et al.

SCIENTIFIC REPORTS (2017)

Article Chemistry, Physical

Interfacial engineering of electron transport layer using Caesium Iodide for efficient and stable organic solar cells

Mushfika Baishakhi Upama et al.

APPLIED SURFACE SCIENCE (2017)

Article Nanoscience & Nanotechnology

Solution-Processable High-Quality Graphene for Organic Solar Cells

Antonio Gaetano Ricciardulli et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Multidisciplinary Sciences

Synthesis and characterization of zinc oxide thin films for optoelectronic applications

E. Muchuweni et al.

HELIYON (2017)

Review Chemistry, Multidisciplinary

Recent Development of Carbon Nanotube Transparent Conductive Films

LePing Yu et al.

CHEMICAL REVIEWS (2016)

Review Energy & Fuels

A review on carbon nanotube/polymer composites for organic solar cells

Godfrey Keru et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2014)

Article Biochemistry & Molecular Biology

Use of Carbon Nanotubes (CNTs) with Polymers in Solar Cells

Huda A. Alturaif et al.

MOLECULES (2014)

Article Nanoscience & Nanotechnology

Development of Inverted Organic Solar Cells with TiO2 Interface Layer by Using Low-Temperature Atomic Layer Deposition

Zhenhua Lin et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

Article Chemistry, Physical

Carbon nanotubes: a multi-functional material for organic optoelectronics

Ross A. Hatton et al.

JOURNAL OF MATERIALS CHEMISTRY (2008)

Review Chemistry, Multidisciplinary

Chemistry of carbon nanotubes

D Tasis et al.

CHEMICAL REVIEWS (2006)