Related references
Note: Only part of the references are listed.Additive manufacturing of steels: a review of achievements and challenges
Nima Haghdadi et al.
JOURNAL OF MATERIALS SCIENCE (2021)
A critical review of corrosion characteristics of additively manufactured stainless steels
Majid Laleh et al.
INTERNATIONAL MATERIALS REVIEWS (2021)
The effect of annealing on the selective laser melting of 2205 duplex stainless steel: Microstructure, grain orientation, and manufacturing challenges
Greg N. Nigon et al.
OPTICS AND LASER TECHNOLOGY (2021)
Grain boundary character distribution in an additively manufactured austenitic stainless steel
Majid Laleh et al.
SCRIPTA MATERIALIA (2021)
Steels in additive manufacturing: A review of their microstructure and properties
P. Bajaj et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
The passivity of selective laser melted 316L stainless steel
Decheng Kong et al.
APPLIED SURFACE SCIENCE (2020)
New insights into the interface characteristics of a duplex stainless steel subjected to accelerated ferrite-to-austenite transformation
N. Haghdadi et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Unanticipated drastic decline in pitting corrosion resistance of additively manufactured 316L stainless steel after high-temperature post-processing
Majid Laleh et al.
CORROSION SCIENCE (2020)
Two and three-dimensional characterisation of localised corrosion affected by lack-of-fusion pores in 316L stainless steel produced by selective laser melting
Majid Laleh et al.
CORROSION SCIENCE (2020)
On the Microstructure and Electrochemical Properties of Additively Manufactured Duplex Stainless Steels Produced Using Laser-Powder Bed Fusion
D. Jiang et al.
CORROSION (2020)
Pitting corrosion of 17-4PH stainless steel manufactured by laser beam melting
Adrien Barroux et al.
CORROSION SCIENCE (2020)
Effect of cyclic rapid thermal loadings on the microstructural evolution of a CrMnFeCoNi high-entropy alloy manufactured by selective laser melting
H. Wang et al.
ACTA MATERIALIA (2020)
Effects of heat treatment and applied stresses on the corrosion performance of additively manufactured super duplex stainless steel clads
Pratik Murkute et al.
MATERIALIA (2020)
The effect of phase transformation route on the intergranular corrosion susceptibility of 2205 duplex stainless steel
Nima Haghdadi et al.
MATERIALS LETTERS (2019)
Microstructure dependence of impact toughness in duplex stainless steels
N. Haghdadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
On the unusual intergranular corrosion resistance of 316L stainless steel additively manufactured by selective laser melting
Majid Laleh et al.
CORROSION SCIENCE (2019)
Selective Laser Melting of Duplex Stainless Steel 2205: Effect of Post-Processing Heat Treatment on Microstructure, Mechanical Properties, and Corrosion Resistance
Suvi Papula et al.
MATERIALS (2019)
Understanding the relation between pitting corrosion resistance and phase fraction of S32101 duplex stainless steel
Heon-Young Ha et al.
CORROSION SCIENCE (2019)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
Effect of ferrite-to-austenite phase transformation path on the interface crystallographic character distributions in a duplex stainless steel
N. Haghdadi et al.
ACTA MATERIALIA (2018)
Effect of post-weld heat treatment on microstructure evolution and pitting corrosion resistance of electron beam-welded duplex stainless steel
Zhiqiang Zhang et al.
CORROSION SCIENCE (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Characterization of nano-scale oxides in austenitic stainless steel processed by powder bed fusion
Fuyao Yan et al.
SCRIPTA MATERIALIA (2018)
Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting
Z. G. Zhu et al.
SCRIPTA MATERIALIA (2018)
Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
Zhongji Sun et al.
NPG ASIA MATERIALS (2018)
in-situ Observation of δ⇆γ Phase Transformations in Duplex Stainless Steel Containing Different Nitrogen Contents
Yong Zhao et al.
ISIJ INTERNATIONAL (2017)
On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel
Qi Chao et al.
SCRIPTA MATERIALIA (2017)
Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties
Florian Hengsbach et al.
MATERIALS & DESIGN (2017)
The influence of microstructural evolution on selective corrosion in duplex stainless steel flux-cored arc welded joints
Zhiqiang Zhang et al.
CORROSION SCIENCE (2017)
A novel high-strain-rate ferrite dynamic softening mechanism facilitated by the interphase in the austenite/ferrite microstructure
N. Haghdadi et al.
ACTA MATERIALIA (2017)
Novel ferritic stainless steel formed by laser melting from duplex stainless steel powder with advanced mechanical properties and high ductility
K. Saeidi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Nitrogen loss and effects on microstructure in multipass TIG welding of a super duplex stainless steel
Vahid A. Hosseini et al.
MATERIALS & DESIGN (2016)
Selective Laser Melting of Duplex Stainless Steel Powders: An Investigation
Karl Davidson et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Investigation of the effect of solution annealing temperature on critical pitting temperature of 2205 duplex stainless steel by measuring pit solution chemistry
M. Naghizadeh et al.
CORROSION SCIENCE (2015)
A statistical study on the effect of annealing temperature on pitting corrosion resistance of 2205 duplex stainless steel
M. Gholami et al.
CORROSION SCIENCE (2015)
Hardened austenite steel with columnar sub-grain structure formed by laser melting
K. Saeidi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Austenitic stainless steel strengthened by the in situ formation of oxide nanoinclusions
Kamran Saeidi et al.
RSC ADVANCES (2015)
Interpretation of the relation between ferrite fraction and pitting corrosion resistance of commercial 2205 duplex stainless steel
Heon-Young Ha et al.
CORROSION SCIENCE (2014)
Effect of Annealing Temperature on the Pitting Corrosion Behavior of UNS S82441 Duplex Stainless Steel
Y. Yang et al.
CORROSION (2013)
Study of corrosion behavior of a 22% Cr duplex stainless steel: Influence of nano-sized chromium nitrides and exposure temperature
Eleonora Bettini et al.
ELECTROCHIMICA ACTA (2013)
Highly Anisotropic Steel Processed by Selective Laser Melting
Thomas Niendorf et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2013)
A comparative study of critical pitting temperature (CPT) of stainless steels by electrochemical impedance spectroscopy (EIS), potentiodynamic and potentiostatic techniques
N. Ebrahimi et al.
CORROSION SCIENCE (2012)
Effect of a brief post-weld heat treatment on the microstructure evolution and pitting corrosion of laser beam welded UNS S31803 duplex stainless steel
Yanze Yang et al.
CORROSION SCIENCE (2012)
Effect of post-weld heat treatment on microstructure evolution and pitting corrosion behavior of UNS S31803 duplex stainless steel welds
Ziying Zhang et al.
CORROSION SCIENCE (2012)
Production of high nitrogen surfaces on 2205 duplex stainless steel substrate using the PTA technique
A. Rokanopoulou et al.
MATERIALS SCIENCE AND TECHNOLOGY (2011)
Effect of annealing temperature on the pitting corrosion resistance of super duplex stainless steel UNS S32750
Hua Tan et al.
MATERIALS CHARACTERIZATION (2009)
Recent developments in stainless steels
K. H. Lo et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2009)
Critical pitting and repassivation temperatures for duplex stainless steel in chloride solutions
Bo Deng et al.
ELECTROCHIMICA ACTA (2008)
Strategies for fabricating atom probe specimens with a dual beam FIB
MK Miller et al.
ULTRAMICROSCOPY (2005)
Share Paper
