Related references
Note: Only part of the references are listed.Compression performance and mechanism of superimposed sine-wave structures fabricated by selective laser melting
Dongdong Gu et al.
MATERIALS & DESIGN (2021)
Interface formation and bonding control in high-volume-fraction (TiC+TiB2)/Al composites and their roles in enhancing properties
Hong-Yu Yang et al.
COMPOSITES PART B-ENGINEERING (2021)
The corrosion behavior of Ti6Al4V fabricated by selective laser melting in the artificial saliva with different fluoride concentrations and pH values
Hongwei Zhang et al.
CORROSION SCIENCE (2021)
Passive Layers and Corrosion Resistance of Biomedical Ti-6Al-4V and β-Ti Alloys
Patrizia Bocchetta et al.
COATINGS (2021)
Enhancing strength-ductility synergy and mechanisms of Al-based composites by size-tunable in-situ TiB2 particles with specific spatial distribution
Bai-Xin Dong et al.
COMPOSITES PART B-ENGINEERING (2021)
Corrosion behavior and mechanism of selective laser melted Ti35Nb alloy produced using pre-alloyed and mixed powder in Hank's solution
P. Qin et al.
CORROSION SCIENCE (2021)
Selective laser melting of AlCu-TiB2 alloy using pulsed wave laser emission mode: processability, microstructure and mechanical properties
Carlo Alberto Biffi et al.
MATERIALS & DESIGN (2021)
Small punch creep performance of heterogeneous microstructure dominated Inconel 718 fabricated by selective laser melting
L. Y. Wang et al.
MATERIALS & DESIGN (2020)
Microstructural examination and corrosion behavior of selective laser melted and conventionally manufactured Ti6Al4V for dental applications
Hafiz Muhammad Hamza et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Additive manufacturing of pure Ti with superior mechanical performance, low cost, and biocompatibility for potential replacement of Ti-6Al-4V
Y. P. Dong et al.
MATERIALS & DESIGN (2020)
Growth factors enhanced angiogenesis and osteogenesis on polydopamine coated titanium surface for bone regeneration
Jiuping Wu et al.
MATERIALS & DESIGN (2020)
Novel hydroxyapatite/graphene oxide/collagen bioactive composite coating on Ti16Nb alloys by electrodeposition
Eren Yilmaz et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
High-Performance Electrocatalytic Conversion of N2 to NH3 Using Oxygen-Vacancy-Rich TiO2 In Situ Grown on Ti3C2Tx MXene
Yanfeng Fang et al.
ADVANCED ENERGY MATERIALS (2019)
Additive manufacturing of Ti6Al4V alloy: A review
Shunyu Liu et al.
MATERIALS & DESIGN (2019)
Probing the initiation and propagation processes of flow accelerated corrosion and erosion corrosion under simulated turbulent flow conditions
Yunze Xu et al.
CORROSION SCIENCE (2019)
Effect of stress-relief annealing on anodic dissolution behaviour of additive manufactured Ti-6Al-4V via laser solid forming
Jiaqiang Li et al.
CORROSION SCIENCE (2019)
Quantitative analysis of local fine structure on diffusion of point defects in passive film on Ti
Lu Wang et al.
ELECTROCHIMICA ACTA (2019)
Calculation of Oxygen Diffusion Coefficients in Oxide Films Formed on Low-Temperature Annealed Zr Alloys and Their Related Corrosion Behavior
Lina Zhang et al.
METALS (2019)
Mechanical and corrosion behavior of titanium alloys additively manufactured by selective laser melting - A comparison between nearly β titanium, α titanium and α plus β titanium
Libo Zhou et al.
OPTICS AND LASER TECHNOLOGY (2019)
Resemblance in Corrosion Behavior of Selective Laser Melted and Traditional Monolithic β Ti-24Nb-4Zr-8Sn Alloy
Peng Qin et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Spark plasma sintering of low modulus titanium-niobium-tantalum-zirconium (TNTZ) alloy for biomedical applications
Nicholas Mavros et al.
MATERIALS & DESIGN (2019)
Corrosion of metallic materials fabricated by selective laser melting
Decheng Kong et al.
NPJ MATERIALS DEGRADATION (2019)
Transformation-induced plasticity and high strength in beta titanium alloy manufactured by selective laser melting
Y. J. Liu et al.
MATERIALIA (2019)
Corrosion Characteristics of Additive-Manufactured Ti-6Al-4V Using Microdroplet Cell and Critical Pitting Temperature Techniques
Dong-Il Seo et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Corrosion behaviour of CoCrMo alloy fabricated by electron beam melting
Xiaojuan Gong et al.
CORROSION SCIENCE (2018)
Metallurgical properties and biomimetic HA deposition performance of Ti-Nb PIM alloys
Eren Yilmaz et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Mechanical properties and electrochemical behavior of porous Ti-Nb biomaterials
Eren Yilmaz et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam melting
Xin Gai et al.
CORROSION SCIENCE (2018)
pH dependent passivation behavior of niobium in acid fluoride-containing solutions
Lei Guan et al.
ELECTROCHIMICA ACTA (2018)
Heat Treatment Degrading the Corrosion Resistance of Selective Laser Melted Ti-6Al-4V Alloy
Nianwei Dai et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Corrosion resistance characteristics of a Ti-6Al-4V alloy scaffold that is fabricated by electron beam melting and selective laser melting for implantation in vivo
Bingjing Zhao et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
In vitro studying corrosion behavior of porous titanium coating in dynamic electrolyte
Xuedan Chen et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Corrosion Behavior of Additive Manufactured Ti-6Al-4V Alloy in NaCl Solution
Jingjing Yang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Electrodiffusion phenomena in neuroscience: a neglected companion
Leonid P. Savtchenko et al.
NATURE REVIEWS NEUROSCIENCE (2017)
Improved corrosion behaviour of electron beam melted Ti-6Al-4V alloy in phosphate buffered saline
Yun Bai et al.
CORROSION SCIENCE (2017)
A closer look at the in vitro electrochemical characterisation of titanium alloys for biomedical applications using in-situ methods
J. -L. Wang et al.
ACTA BIOMATERIALIA (2017)
Corrosion Behaviour of Selective Laser Melted Ti-TiB Biocomposite in Simulated Body Fluid
Yang Chen et al.
ELECTROCHIMICA ACTA (2017)
A computational study of yttria-stabilized zirconia: II. Cation diffusion
Yanhao Dong et al.
ACTA MATERIALIA (2017)
In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance
W. Xu et al.
ACTA MATERIALIA (2017)
Corrosion behavior of selective laser melted Ti-6Al-4V alloy in NaCl solution
Nianwei Dai et al.
CORROSION SCIENCE (2016)
Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes
Nianwei Dai et al.
CORROSION SCIENCE (2016)
Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications
L. -C. Zhang et al.
MATERIALS TECHNOLOGY (2016)
Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
M. Qian et al.
MRS BULLETIN (2016)
Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition
W. Xu et al.
ACTA MATERIALIA (2015)
Effects of alloyed Si on the autoclave corrosion performance and periodic corrosion kinetics in Zr-Sn-Nb-Fe-O alloys
Liangyu Chen et al.
CORROSION SCIENCE (2015)
Microstructure and Mechanical Properties of Long Ti-6Al-4V Rods Additively Manufactured by Selective Electron Beam Melting Out of a Deep Powder Bed and the Effect of Subsequent Hot Isostatic Pressing
S. L. Lu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
E. O. Olakanmi et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Passive and transpassive behaviour of Alloy 31 in a heavy brine LiBr solution
R. M. Fernandez-Domene et al.
ELECTROCHIMICA ACTA (2013)
A new asymmetric Schiff base system as fluorescent chemosensor for Al3+ ion
Reza Azadbakht et al.
INORGANIC CHEMISTRY COMMUNICATIONS (2013)
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
Bey Vrancken et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Investigation of pitting resistance of titanium based on a modified point defect model
Zhonglin Jiang et al.
CORROSION SCIENCE (2011)
In situ corrosion monitoring of Ti-6Al-4V alloy in H2SO4/HCl mixed solution using electrochemical AFM
Jhen-Rong Chen et al.
ELECTROCHIMICA ACTA (2011)
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti-24Nb-4Zr-8Sn alloy
L. C. Zhang et al.
SCRIPTA MATERIALIA (2011)
Electrochemical corrosion behavior of nickel coating with high density nano-scale twins (NT) in solution with Cl-
Feilong Sun et al.
ELECTROCHIMICA ACTA (2009)
Ti based biomaterials, the ultimate choice for orthopaedic implants - A review
M. Geetha et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Fatigue properties of a metastable β-type titanium alloy with reversible phase transformation
S. J. Li et al.
ACTA BIOMATERIALIA (2008)
Corrosion and mechanical-micro structural aspects of dissimilar joints of Ti-6Al-4V and Al plates
Nizamettin Kahraman et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2007)
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
XY Liu et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2004)
Metal ion release from metal implants
T Hanawa
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2004)
Electrochemical characterisation of passive films on Ti alloys under simulated biological conditions
AWE Hodgson et al.
ELECTROCHIMICA ACTA (2002)
Comparative study of the formation of hydroxyapatite in simulated body fluid under static and flowing systems
P Siriphannon et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
Effects of fluoride concentration and elastic tensile strain on the corrosion resistance of commercially pure titanium
HH Huang
BIOMATERIALS (2002)