☆ 4.5 Article

Hot tensile deformation behavior and microstructure evolution of Mg-1Al-6Y alloy

MATERIALS RESEARCH EXPRESS (2021)

Related references

Note: Only part of the references are listed.

Article Metallurgy & Metallurgical Engineering

Texture property and weakening mechanism of Mg-3Al-1Zn alloy by interactive alternating forward extrusion

Ye Wang et al.

Summary: The interactive alternating forward extrusion (AFE) method can change the texture type and weaken the texture strength. The texture evolution of interactive AFE was studied using AZ31 magnesium alloy as an example. The results show that various dynamic recrystallization behaviors can weaken the texture to different degrees, with twinning-induced recrystallization having a particularly significant effect. The formation of a stable fiber texture was observed during the AFE process.

JOURNAL OF MAGNESIUM AND ALLOYS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural characteristics and mechanical properties of the hot extruded Mg-Zn-Y-Nd alloys

B. N. Du et al.

Summary: A new Mg-Zn-Y-Nd alloy for degradable orthopedic implants was developed and the influences of Zn and Y content on microstructures and mechanical behaviors were discussed. Results showed that increasing Y content can enhance the tensile and compressive strength of the alloy, while decreasing elongation.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Hot tensile deformation behavior of extruded LAZ532 alloy with heterostructure

Xiaoqiang Li et al.

Summary: The hot tensile test was performed on an extruded Mg-5Li-3Al-2Zn (LAZ532) alloy with a heterostructure of fibrous extrusion zones (FEZs) and nonfibrous extrusion zones (non-FEZs) coexisted, showing that the alloy exhibited superplastic characteristics at lower strain rates or higher deformation temperatures. The microstructure analysis revealed different deformation behaviors between the FEZs and non-FEZs, with different mechanisms dominating during different stages of deformation. The activation energy was calculated to be around 110.0 kJ/mol, and the hot tensile deformation mechanism involved alternating and coordinated deformation among grain boundary slip, intragranular slip, and dynamic recrystallization (DRX).

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of thermo-mechanical processing parameters on the dynamic restoration mechanism in an Mg-4Y-2Nd-1Sm-0.5Zr alloy during hot compression

Yunwei Gui et al.

Summary: The microstructure evolution and dynamic restoration mechanism of solution-treated Mg-4Y-2Nd-1Sm-0.5Zr alloy were studied under three TMP parameters. A strong dynamic softening was observed, leading to the determination of an optimal processing domain and influencing the formation of dynamic recrystallization grains.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of Sn addition on the deformation behavior and microstructural evolution of Mg-Gd-Y-Zr alloy during hot compression

Qian Zhang et al.

Summary: The addition of Sn in Mg-Gd-Y-Sn-Zr alloys promotes dynamic precipitation, dynamic recrystallization, and inhibits the formation of high-angle grain boundaries. At different temperature and strain rate conditions, there is a competitive relationship between dynamic recrystallization and flow stress reduction.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Twinning and dynamic recrystallization of Mg-7Sn-3Zn alloy under high strain rate hot compression

Bin-Jiang Lv et al.

Summary: This study investigates the twinning behavior and dynamic recrystallization (DRX) of Mg-7Sn-3Zn alloy under high strain rate conditions. The results show that certain twinning mechanisms occur at different temperatures, influenced by factors such as Schmid factor and geometric compatibility. Additionally, the recrystallization process is significantly improved at higher temperatures, likely due to enhanced grain boundary migration and nucleation rate.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Dynamic precipitation and recrystallization mechanism during hot compression of Mg-Gd-Y-Zr alloy

Qian Zhang et al.

Summary: In this study, the microstructure evolution and dynamic recrystallization mechanism of Mg-Gd-Y-Zr alloy under different deformation conditions were analyzed in detail. It was found that dynamic precipitation occurs prior to dynamic recrystallization, and large-size hard phase particles can induce dynamic recrystallization under high strain conditions, promoting grain refinement.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Chemistry, Physical

Hot deformation behavior and processing map of a new type Mg-6Zn-1 Gd-1Er alloy

Bo Che et al.

Summary: The study investigated the hot deformation behavior of a new Mg-6Zn-1Gd-1Er alloy, showing that flow stress increased with increasing strain rate and decreasing temperature. Processing maps were developed to determine optimal parameters, while microstructure analysis revealed different deformation mechanisms and textures at various temperatures.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Deformation behavior of Mg-13Gd-4Y-2Zn-0.5Zr alloy on the basis of LPSO kinking, dynamic recrystallization and twinning during compression-torsion

Wenlong Xu et al.

Summary: At 350 degrees C, the Mg-13Gd-4Y-2Zn-0.5Zr alloy exhibits the coordinated effects of multiple deformation mechanisms under different equivalent strain rates, including lamellar LPSO phases kinking, dynamic recrystallization (DRX), and twinning, weakening the basal texture.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of subgrain and the associated DRX behaviour on the texture modification of Mg-6.63Zn-0.56Zr alloy during hot tensile deformation

Jingyuan Shen et al.

Summary: The study found that the influence of DRXed grains, subgrains and deformed grains on the basal texture of Mg-Zn-Zr alloy during hot tensile deformation is determined by a compromise between the randomized texture of DRXed grains and the preferred texture of subgrains and deformed grains.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation of hot extruded GW84 alloy on high temperature tensile properties and microstructure evolution

Lipeng Yan et al.

Summary: The study investigated the tensile properties and microstructure changes of the GW84 alloy during hot extrusion at different temperatures. It was found that the alloy exhibited excellent high temperature mechanical properties, with the ultimate tensile strength peaking at 393 MPa at 250 degrees C. The microstructure of the alloy underwent significant changes during the high temperature tensile process, including phase transformations and increased precipitation at higher temperatures.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Strain induced transformation, dynamic recrystallization and texture evolution during hot compression of an extruded Mg-Gd-Y-Zn-Zr alloy

H. Esmaeilpour et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of circumferential strain rate on dynamic recrystallization and texture of Mg-13Gd-4Y-2Zn-0.5Zr alloy during rotary backward extrusion

Yingze Meng et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

Add to Collection

Article Chemistry, Physical

Refining the microstructure and modifying the texture of the AZ80 alloy cylindrical tube by the rotating backward extrusion with different rotating revolutions

Beibei Dong et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Zn addition on the aging behavior and mechanical properties of Mg-8Al-2Sn wrought alloy

Luyao Jiang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Superplasticity induced by the competitive DRX between BCC beta and HCP alpha in Ti-4Al-3V-2Mo-2Fe alloy

Jingyuan Shen et al.

MATERIALS CHARACTERIZATION (2019)

Add to Collection

Article Nanoscience & Nanotechnology

The effect of Y content on microstructure and tensile properties of the as-extruded Mg-1Al-xY alloy

Jinhui Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Overview of advancement and development trend on magnesium alloy

Tiancai Xu et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2019)

Add to Collection

Article Chemistry, Physical

Effects of second phases on deformation behavior and dynamic recrystallization of as-cast Mg-4.3Li-4.1Zn-1.4Y alloy during hot compression

Yucheng Zhou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Atomic-Scale Insight into Structure and Interface of Al2Y Phase in an Mg-Al-Y Alloy

Z. Z. Peng et al.

ADVANCED ENGINEERING MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Hot tensile deformation behavior of Mg-Zn-Al magnesium alloy tubes processed by severe plastic deformation

M. Eftekhari et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Chemistry, Physical

Unified modeling of work hardening and flow softening in two-phase titanium alloys considering microstructure evolution in thermomechanical processes

J. Guo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Individual effect of recrystallisation nucleation sites on texture weakening in a magnesium alloy: Part 1-double twins

Dikai Guan et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Metallurgy & Metallurgical Engineering

HOT DEFORMATION BEHAVIOR OF Mg-Zn-Al ALLOY TUBE PROCESSED BY SEVERE PLASTIC DEFORMATION

A. Fata et al.

ARCHIVES OF METALLURGY AND MATERIALS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Evidence for exceptional low temperature ductility in polycrystalline magnesium processed by severe plastic deformation

Roberto B. Figueiredo et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Hot tensile deformation behavior and microstructural evolution of a Mg-9.3Li-1.79Al-1.61Zn alloy

Furong Cao et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Hot tensile deformation behaviors and constitutive model of 42CrMo steel

Yuan-Chun Huang et al.

MATERIALS & DESIGN (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Characterization of nanostructured pure aluminum tubes produced by tubular channel angular pressing (TCAP)

M. Mesbah et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of long-period stacking ordered phase on thermal stability of refined grains in Mg-RE-based alloys

Y. X. Li et al.

PHILOSOPHICAL MAGAZINE (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Hot tensile deformation and fracture behaviors of AZ31 magnesium alloy

Jiao Deng et al.

MATERIALS & DESIGN (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Role of Solute in the Texture Modification During Hot Deformation of Mg-Rare Earth Alloys

Jason P. Hadorn et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals

Adrien Chapuis et al.

ACTA MATERIALIA (2011)

Add to Collection

Article Nanoscience & Nanotechnology

A comparative study on Arrhenius-type constitutive model and artificial neural network model to predict high-temperature deformation behaviour in Aermet100 steel

Guoliang Ji et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

Add to Collection

Article Chemistry, Physical

Characterization and preparation of Mg-Al-Zn alloys with minor Sc

D. H. Xiao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Add to Collection

Article Nanoscience & Nanotechnology

Principles of grain refinement and superplastic flow in magnesium alloys processed by ECAP

Roberto B. Figueiredo et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Solute segregation and precipitation in a creep-resistant Mg-Gd-Zn alloy

J. F. Nie et al.

ACTA MATERIALIA (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Developing superplasticity in a magnesium AZ31 alloy by ECAP

Roberto B. Figueiredo et al.

JOURNAL OF MATERIALS SCIENCE (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural development during hot working of Mg-3Al-1Zn

A. G. Beer et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of preliminary extrusion conditions on the superplastic properties of a magnesium alloy processed by ECAP

Mitsuaki Furui et al.

ACTA MATERIALIA (2007)

Add to Collection

Article Nanoscience & Nanotechnology

Elevated temperature Mg97Y2Cu1 alloy with long period ordered structure

Yoshihito Kawamura et al.

SCRIPTA MATERIALIA (2006)

Add to Collection

Article Thermodynamics

A thermodynamic reassessment of the Al-Y system

Shuhong Liu et al.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2006)

Add to Collection

Article Engineering, Industrial

High temperature deformation of Inconel 718

A. Thomas et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)

Add to Collection

Article Nanoscience & Nanotechnology

Exceptional superplasticity in an AZ61 magnesium alloy processed by extrusion and ECAP

Y Miyahara et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Extraordinary superplastic ductility of magnesium alloy ZK60

R Lapovok et al.

JOURNAL OF MATERIALS RESEARCH (2005)

Add to Collection

Article Engineering, Mechanical

Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B

SR Agnew et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2005)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of Mg-Al based alloy with calcium and rare earth additions

WW Du et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

Add to Collection

Article Nanoscience & Nanotechnology

Creep-resistant magnesium alloys

BL Mordike

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)

Add to Collection

Article Materials Science, Multidisciplinary

Dynamic recrystallization in pure magnesium

O Sitdikov et al.

MATERIALS TRANSACTIONS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.