Related references
Note: Only part of the references are listed.3D printed tacrolimus suppositories for the treatment of ulcerative colitis
Iria Seoane-Viano et al.
ASIAN JOURNAL OF PHARMACEUTICAL SCIENCES (2021)
Vat photopolymerization 3D printing for advanced drug delivery and medical device applications
Xiaoyan Xu et al.
JOURNAL OF CONTROLLED RELEASE (2021)
3D printed bilayer tablet with dual controlled drug release for tuberculosis treatment
Atabak Ghanizadeh Tabriz et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
3D printed estradiol-eluting urogynecological mesh implants: Influence of material and mesh geometry on their mechanical properties
Zara-Louise Farmer et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
3D printed clotrimazole intravaginal ring for the treatment of recurrent vaginal candidiasis
Mattia Tiboni et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
3D printing of patient-tailored SNEDDS-based suppositories of lidocaine
Aikaterini-Theodora Chatzitaki et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2021)
A review of three-dimensional printing for pharmaceutical applications: Quality control, risk assessment and future perspectives
Rabinarayan Parhi
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2021)
Mechanical properties of 3D printed mouthguards: Influence of layer height and device thickness
Ana M. Sousa et al.
MATERIALS & DESIGN (2021)
Coaxial-printed small-diameter polyelectrolyte-based tubes with an electrostatic self-assembly of heparin and YIGSR peptide for antithrombogenicity and endothelialization
Zhiwen Zeng et al.
BIOACTIVE MATERIALS (2021)
Cellulose and its derivatives for application in 3D printing of pharmaceuticals
Bhupendra Raj Giri et al.
JOURNAL OF PHARMACEUTICAL INVESTIGATION (2021)
Outlooks on Three-Dimensional Printing for Ocular Biomaterials Research
Owen S. Fenton et al.
JOURNAL OF OCULAR PHARMACOLOGY AND THERAPEUTICS (2020)
Preparation and In vitro Evaluation of FDM 3D-Printed Ellipsoid-Shaped Gastric Floating Tablets with Low Infill Percentages
Di Chen et al.
AAPS PHARMSCITECH (2020)
Making tablets for delivery of poorly soluble drugs using photoinitiated 3D inkjet printing
Elizabeth A. Clark et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Preparation of printable double-network hydrogels with rapid self-healing and high elasticity based on hyaluronic acid for controlled drug release
Yang Qiao et al.
POLYMER (2020)
In Vivo Evaluation of Three-Dimensional Printed, Keratin-Based Hydrogels in a Porcine Thermal Burn Model
Javier Navarro et al.
TISSUE ENGINEERING PART A (2020)
E-jet 3D printed drug delivery implants to inhibit growth and metastasis of orthotopic breast cancer
Yikun Yang et al.
BIOMATERIALS (2020)
3D printing of multilayered orodispersible films with in-process drying
Jan Elbl et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Modulating sustained drug release from nanocellulose hydrogel by adjusting the inner geometry of implantable capsules
Vili-Veli Auvinen et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2020)
Fabrication of floating capsule-in-3D-printed devices as gastro-retentive delivery systems of amoxicillin
Thapakorn Charoenying et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2020)
3D printed microneedles for anticancer therapy of skin tumours
Md Jasim Uddin et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Development of a Biodegradable Subcutaneous Implant for Prolonged Drug Delivery Using 3D Printing
Sarah A. Stewart et al.
PHARMACEUTICS (2020)
Formulation and Characterization of a 3D-Printed Cryptotanshinone-Loaded Niosomal Hydrogel for Topical Therapy of Acne
Zhuxian Wang et al.
AAPS PHARMSCITECH (2020)
3D printed core-shell hydrogel fiber scaffolds with NIR-triggered drug release for localized therapy of breast cancer
Xiaoyue Wei et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Additive Manufacturing Technologies for Drug Delivery Applications
Abdullah Mohammed et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
3D printed biodegradable implants as an individualized drug delivery system for local chemotherapy of osteosarcoma
Yonghui Wang et al.
MATERIALS & DESIGN (2020)
3D Printing Technologies: Recent Development and Emerging Applications in Various Drug Delivery Systems
Shery Jacob et al.
AAPS PHARMSCITECH (2020)
3D printing for drug delivery and biomedical applications
Sarwar Beg et al.
DRUG DISCOVERY TODAY (2020)
A tunable extruded 3D printing platform using thermo-sensitive pastes
Yan Yang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Preparation and evaluation of identifiable quick response (QR)-coded orodispersible films using 3D printer with directly feeding nozzle
Byung-Cheol Oh et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Pharmaceutical Applications of 3D Printing
Grona Chen et al.
ADDITIVE MANUFACTURING (2020)
Enhanced osteogenesis of 3D printed β-TCP scaffolds with Cissus Quadrangularis extract-loaded polydopamine coatings
Samuel F. Robertson et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
3D Printing of Tunable Zero-Order Release Printlets
Fabrizio Fina et al.
POLYMERS (2020)
3D printing: An appealing route for customized drug delivery systems
Nermeen A. Elkasabgy et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Fabrication of Montelukast sodium loaded filaments and 3D printing transdermal patches onto packaging material
Erkan Azizoglu et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Additive manufacturing in drug delivery applications: A review
R. Durga Prasad Reddy et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Evaluation of a Novel 3D-Printed Urinary Catheterization Simulation Model in Undergraduate Medical Teaching
Charlie J. Gillis et al.
CUREUS JOURNAL OF MEDICAL SCIENCE (2020)
3D Printed Antibiotic and Chemotherapeutic Eluting Catheters for Potential Use in Interventional Radiology: In Vitro Proof of Concept Study
Jeffery A. Weisman et al.
ACADEMIC RADIOLOGY (2019)
3D printed, controlled release, tritherapeutic tablet matrix for advanced anti-HIV-1 drug delivery
Margaret Siyawamwaya et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2019)
Mechanical characterization and ex vivo evaluation of anticancer and antiviral drug printed bioadhesive film for the treatment of cervical cancer
Cem Varan et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
'Temporary Plasticiser': A novel solution to fabricate 3D printed patient-centred cardiovascular 'Polypill' architectures
Beatriz C. Pereira et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2019)
Application of 3D printing technology and quality by design approach for development of age-appropriate pediatric formulation of baclofen
Siddhant Palekar et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Retentive device for intravesical drug delivery based on water-induced shape memory response of poly(vinyl alcohol): design concept and 4D printing feasibility
A. Melocchi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
3D Printing of Metformin HCl PVA Tablets by Fused Deposition Modeling: Drug Loading, Tablet Design, and Dissolution Studies
Mariam Ibrahim et al.
AAPS PHARMSCITECH (2019)
Hydroxypropyl-β-cyclodextrin-based fast dissolving carbamazepine printlets prepared by semisolid extrusion 3D printing
Jaime Conceicao et al.
CARBOHYDRATE POLYMERS (2019)
A fibrous cellulose paste formulation to manufacture structural parts using 3D printing by extrusion
C. Thibaut et al.
CARBOHYDRATE POLYMERS (2019)
Poly(vinyl alcohol) 3D printed tablets: The effect of polymer particle size on drug loading and process efficiency
Marilena Saviano et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Comparison of Linear and 4-Arm Star Poly(vinyl pyrrolidone) for Aqueous Binder Jetting Additive Manufacturing of Personalized Dosage Tablets
Emily M. Wilts et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Water-based 3D inkjet printing of an oral pharmaceutical dosage form
Hatim K. Cader et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Feasibility study into the potential use of fused-deposition modeling to manufacture 3D-printed enteric capsules in compounding pharmacies
Christoph Nober et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Development of a gastroretentive delivery system for acyclovir by 3D printing technology and its in vivo pharmacokinetic evaluation in Beagle dogs
Soyoung Shin et al.
PLOS ONE (2019)
Drug Incorporation into Polymer Filament Using Simple Soaking Method for Tablet Preparation Using Fused Deposition Modeling
Tatsuaki Tagami et al.
BIOLOGICAL & PHARMACEUTICAL BULLETIN (2019)
3D printing of unique water-soluble polymer-based suppository shell for controlled drug release
Tatsuaki Tagami et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Design and 3D printing of multi-compartmental PVA capsules for drug delivery
Gordana Matijasic et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2019)
Design and development of zero-order drug release gastroretentive floating tablets fabricated by 3D printing technology
Kampanart Huanbutta et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2019)
3D printed microneedle patches using stereolithography (SLA) for intradermal insulin delivery
Sophia N. Economidou et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Personalized 3D printed ciprofloxacin impregnated meshes for the management of hernia
Nadia Qamar et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2019)
A 3D printed chitosan-pectin hydrogel wound dressing for lidocaine hydrochloride delivery
Jingjunjiao Long et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Structure-Based Gastro-Retentive and Controlled-Release Drug Delivery with Novel 3D Printing
Haoyang Wen et al.
AAPS PHARMSCITECH (2019)
3D-Printed Isoniazid Tablets for the Treatment and Prevention of TuberculosisPersonalized Dosing and Drug Release
Heidi Oblom et al.
AAPS PHARMSCITECH (2019)
Physiological and Pharmaceutical Considerations for Rectal Drug Formulations
Susan Hua
FRONTIERS IN PHARMACOLOGY (2019)
Fused Deposition Modeling as an Effective Tool for Anti-Infective Dialysis Catheter Fabrication
Essyrose Mathew et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Recent advances in pharmaceutical dosage forms and devices using additive manufacturing technologies
Christos I. Gioumouxouzis et al.
DRUG DISCOVERY TODAY (2019)
Printfills: 3D printed systems combining fused deposition modeling and injection volume filling. Application to colon-specific drug delivery
Vicente Linares et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2019)
Heparin coating on 3D printed poly (l-lactic acid) biodegradable cardiovascular stent via mild surface modification approach for coronary artery implantation
Sang Jin Lee et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Extrudability analysis of drug loaded pastes for 3D printing of modified release tablets
Ahmed Zidan et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Dapivirine-releasing vaginal rings produced by plastic freeforming additive manufacturing
Nicole R. Welsh et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy
Hyunah Cho et al.
MOLECULAR PHARMACEUTICS (2019)
3D-Printed Network Structures as Controlled-Release Drug Delivery Systems: Dose Adjustment, API Release Analysis and Prediction
Carolin Korte et al.
AAPS PHARMSCITECH (2018)
Pharmaceutical Additive Manufacturing: a Novel Tool for Complex and Personalized Drug Delivery Systems
Jiaxiang Zhang et al.
AAPS PHARMSCITECH (2018)
3D printed drug delivery and testing systems - a passing fad or the future?
Seng Han Lim et al.
ADVANCED DRUG DELIVERY REVIEWS (2018)
The Year in Review: Comments on Plants, Cyclodextrins, Microbiota, and Diabetes Foreword
William A. Banks
CURRENT PHARMACEUTICAL DESIGN (2018)
A New Model of a 3D-Printed Shell with Convex Drug Release Profile
Jingzhou Zhao et al.
DISSOLUTION TECHNOLOGIES (2018)
Oral disintegrating patient-tailored tablets of warfarin sodium produced by 3D printing
Pan Tian et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2018)
Reshaping drug development using 3D printing
Atheer Awad et al.
DRUG DISCOVERY TODAY (2018)
Personalisation of warfarin therapy using thermal ink-jet printing
Parameswara Rao Vuddanda et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
On demand manufacturing of patient-specific liquid capsules via coordinated 3D printing and liquid dispensing
Tochukwu C. Okwuosa et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
A 3D printed bilayer oral solid dosage form combining metformin for prolonged and glimepiride for immediate drug delivery
Christos I. Gioumouxouzis et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
3D printing applications for transdermal drug delivery
Sophia N. Economidou et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Pharmaceutical 3D printing: Design and qualification of a single step print and fill capsule
Derrick M. Smith et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D printed microneedles for insulin skin delivery
Cristiane Patricia Pissinato Pere et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Fabricating 3D printed orally disintegrating printlets using selective laser sintering
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Low temperature fused deposition modeling (FDM) 3D printing of thermolabile drugs
Gayathri Kollamaram et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D printed medicines: A new branch of digital healthcare
Atheer Awad et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D printing of vaginal rings with personalized shapes for controlled release of progesterone
Junhui Fu et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Spatially controlled coating of continuous liquid interface production microneedles for transdermal protein delivery
Cassie L. Caudill et al.
JOURNAL OF CONTROLLED RELEASE (2018)
Formulation strategies for solid oral dosage form using 3D printing technology: A mini-review
Pinak Khatri et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2018)
Formulation of 3D Printed Tablet for Rapid Drug Release by Fused Deposition Modeling: Screening Polymers for Drug Release, Drug-Polymer Miscibility and Printability
Nayan G. Solanki et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
The Application of 3D Printing in the Formulation of Multilayered Fast Dissolving Oral Films
Touraj Ehtezazi et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
3D printed Polycaprolactone scaffolds with dual macro-microporosity for applications in local delivery of antibiotics
Luke E. Visscher et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
3D Printed Starmix Drug Loaded Dosage Forms for Paediatric Applications
Nicolaos Scoutaris et al.
PHARMACEUTICAL RESEARCH (2018)
3D Printing in Pharmaceutical and Medical Applications - Recent Achievements and Challenges
Witold Jamroz et al.
PHARMACEUTICAL RESEARCH (2018)
Immediate Release 3D-Printed Tablets Produced Via Fused Deposition Modeling of a Thermo-Sensitive Drug
Wiebke Kempin et al.
PHARMACEUTICAL RESEARCH (2018)
3D Printing Pharmaceuticals: Drug Development to Frontline Care
Sarah J. Trenfield et al.
TRENDS IN PHARMACOLOGICAL SCIENCES (2018)
Nanogels for Pharmaceutical and Biomedical Applications and Their Fabrication Using 3D Printing Technologies
Hyunah Cho et al.
MATERIALS (2018)
3D printing of a wearable personalized oral delivery device: A first-in-human study
Kun Liang et al.
SCIENCE ADVANCES (2018)
Additive Manufacturing with 3D Printing: Progress from Bench to Bedside
Ziyaur Rahman et al.
AAPS JOURNAL (2018)
Integration of 3D printing with dosage forms: A new perspective for modern healthcare
Pravin Shende et al.
BIOMEDICINE & PHARMACOTHERAPY (2018)
Influence of custom-made and stock mouthguard thickness on biomechanical response to a simulated impact
Joao Paulo Mendes Tribst et al.
DENTAL TRAUMATOLOGY (2018)
THE AGE OF PHARMACEUTICAL 3D PRINTING. TECHNOLOGICAL AND THERAPEUTICAL IMPLICATIONS OF ADDITIVE MANUFACTURING
Ion-Bogdan Dumitrescu et al.
FARMACIA (2018)
Personalized orodispersible films by hot melt ram extrusion 3D printing
Umberto M. Musazzi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Pharmaceutical Product Development Exploiting 3D Printing Technology: Conventional to Novel Drug Delivery System
Md. Shoaib Alam et al.
CURRENT PHARMACEUTICAL DESIGN (2018)
Nanoporous 3D-Printed Scaffolds for Local Doxorubicin Delivery in Bone Metastases Secondary to Prostate Cancer
Pouyan Ahangar et al.
MATERIALS (2018)
A Review of 3D Printing Technology for Medical Applications
Qian Yan et al.
ENGINEERING (2018)
A Critical Review on 3D-printed Dosage Forms
Ilias El Aita et al.
CURRENT PHARMACEUTICAL DESIGN (2018)
Selective Laser Melting of Integrated Ti6Al4V ELI Permeable Walls for Controlled Drug Delivery of Vancomycin
Martin B. Bezuidenhout et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Advanced Pharmaceutical Applications of Hot-Melt Extrusion Coupled with Fused Deposition Modelling (FDM) 3D Printing for Personalised Drug Delivery
Deck Khong Tan et al.
PHARMACEUTICS (2018)
Additive manufacturing of pharmaceuticals for precision medicine applications: A review of the promises and perils in implementation
Megha Trivedi et al.
ADDITIVE MANUFACTURING (2018)
Controlled and Sequential Delivery of Fluorophores from 3D Printed Alginate-PLGA Tubes
Anh-Vu Do et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Fabricating a Shell-Core Delayed Release Tablet Using Dual FDM 3D Printing for Patient-Centred Therapy
Tochukwu C. Okwuosa et al.
PHARMACEUTICAL RESEARCH (2017)
Assessment of different polymers and drug loads for fused deposition modeling of drug loaded implants
Wiebke Kempin et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2017)
3D printed drug delivery devices: perspectives and technical challenges
Mirja Palo et al.
EXPERT REVIEW OF MEDICAL DEVICES (2017)
Patient-specific 3D scanned and 3D printed antimicrobial polycaprolactone wound dressings
Zaid Muwaffak et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Dropwise additive manufacturing of pharmaceutical products for amorphous and self emulsifying drug delivery systems
Elcin Icten et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Selective laser sintering (SLS) 3D printing of medicines
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
3D printed tablets loaded with polymeric nanocapsules: An innovative approach to produce customized drug delivery systems
R. C. R. Beck et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
3D printed orodispersible films with Aripiprazole
Witold Jamroz et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Tablets of multi-unit pellet system for controlled drug delivery
Tongkai Chen et al.
JOURNAL OF CONTROLLED RELEASE (2017)
3D printed multi-compartment capsular devices for two-pulse oral drug delivery
A. Maroni et al.
JOURNAL OF CONTROLLED RELEASE (2017)
3D inkjet printing of tablets exploiting bespoke complex geometries for controlled and tuneable drug release
Mary Kyobula et al.
JOURNAL OF CONTROLLED RELEASE (2017)
Low-temperature deposition manufacturing: A novel and promising rapid prototyping technology for the fabrication of tissue-engineered scaffold
Wei Liu et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Accuracy and feasibility of piezoelectric inkjet coating technology for applications in microneedle-based transdermal delivery
Conor O'Mahony et al.
MICROELECTRONIC ENGINEERING (2017)
Usefulness of a Cardiovascular Polypill in the Treatment of Secondary Prevention Patients in Spain: A Cost-effectiveness Study
Vivencio Barrios et al.
REVISTA ESPANOLA DE CARDIOLOGIA (2017)
Three-dimensional printing of bioactive hernia meshes: In vitro proof of principle
David H. Ballard et al.
SURGERY (2017)
Catheter-related blood stream infections in hemodialysis patients: a prospective cohort study
Stephanie Thompson et al.
BMC NEPHROLOGY (2017)
Preparation of active 3D film patches via aligned fiber electrohydrodynamic (EHD) printing
Jun-Chuan Wang et al.
SCIENTIFIC REPORTS (2017)
Fused Deposition Modeling (FDM) 3D Printed Tablets for Intragastric Floating Delivery of Domperidone
Xuyu Chai et al.
SCIENTIFIC REPORTS (2017)
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
James Norman et al.
ADVANCED DRUG DELIVERY REVIEWS (2017)
Cross-Linked Hydrogel for Pharmaceutical Applications: A Review
Rabinarayan Parhi
ADVANCED PHARMACEUTICAL BULLETIN (2017)
Accuracy of printed dental models made with 2 prototype technologies and different designs of model bases
Leonardo Tavares Camardella et al.
AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS (2017)
Materials for additive manufacturing
David Bourell et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Modifying release characteristics from 3D printed drug-eluting products
Johan Boetker et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
Ethylene vinyl acetate (EVA) as a new drug carrier for 3D printed medical drug delivery devices
Natalja Genina et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
An investigation into the use of polymer blends to improve the printability of and regulate drug release from pharmaceutical solid dispersions prepared via fused deposition modeling (FDM) 3D printing
Muqdad Alhijjaj et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2016)
Fabrication of non-dissolving analgesic suppositories using 3D printed moulds
Yuanyuan Sun et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole Jonathan et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
A 3D-printed local drug delivery patch for pancreatic cancer growth suppression
Hee-Gyeong Yi et al.
JOURNAL OF CONTROLLED RELEASE (2016)
3D scanning and 3D printing as innovative technologies for fabricating personalized topical drug delivery systems
Alvaro Goyanes et al.
JOURNAL OF CONTROLLED RELEASE (2016)
Adding functionality with additive manufacturing: Fabrication of titanium-based antibiotic eluting implants
Sophie C. Cox et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Microneedle arrays as transdermal and intradermal drug delivery systems: Materials science, manufacture and commercial development
Eneko Larraneta et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2016)
A Lower Temperature FDM 3D Printing for the Manufacture of Patient-Specific Immediate Release Tablets
Tochukwu C. Okwuosa et al.
PHARMACEUTICAL RESEARCH (2016)
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
Mohamed A. Alhnan et al.
PHARMACEUTICAL RESEARCH (2016)
Single-Step Fabrication of Computationally Designed Microneedles by Continuous Liquid Interface Production
Ashley R. Johnson et al.
PLOS ONE (2016)
Designing Biomaterials for 3D Printing
Murat Guvendiren et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Designing Biomaterials for 3D Printing
Murat Guvendiren et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D-Printing Strong High-Resolution Antioxidant Bioresorbable Vascular Stents
Robert van Lith et al.
ADVANCED MATERIALS TECHNOLOGIES (2016)
Colon-Targeted Oral Drug Delivery Systems: Design Trends and Approaches
Seth Amidon et al.
AAPS PHARMSCITECH (2015)
3D-Printable Antimicrobial Composite Resins
Jun Yue et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing
Justyna Skowyra et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Alvaro Goyanes et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
Hyperspectral imaging in quality control of inkjet printed personalised dosage forms
Hossein Vakili et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
3D printing of tablets containing multiple drugs with defined release profiles
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles
Shaban A. Khaled et al.
JOURNAL OF CONTROLLED RELEASE (2015)
3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs
Alice Melocchi et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2015)
Three-Dimensional Printing of Drug-Eluting Implants: Preparation of an Antimicrobial Polylactide Feedstock Material
Jorrit Jeroen Water et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics
Alvaro Goyanes et al.
MOLECULAR PHARMACEUTICS (2015)
Continuous liquid interface production of 3D objects
John R. Tumbleston et al.
SCIENCE (2015)
A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing
Seyed Farid Seyed Shirazi et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
Comprehensive review on additives of topical dosage forms for drug delivery
Tarun Garg et al.
DRUG DELIVERY (2015)
Microstereolithography and characterization of poly(propylene fumarate)-based drug-loaded microneedle arrays
Yanfeng Lu et al.
BIOFABRICATION (2015)
Polycaprolactone-Coated 3D Printed Tricalcium Phosphate Scaffolds for Bone Tissue Engineering: In Vitro Alendronate Release Behavior and Local Delivery Effect on In Vivo Osteogenesis
Solaiman Tarafder et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
A Comparative Study Between Spray-Drying and Fluidized Bed Coating Processes for the Preparation of Pramipexole Controlled-Release Microparticles for Orally Disintegrating Tablets
Ju-Young Kim et al.
DRYING TECHNOLOGY (2014)
A global sustainability perspective on 3D printing technologies
Malte Gebler et al.
ENERGY POLICY (2014)
Towards fabrication of 3D printed medical devices to prevent biofilm formation
Niklas Sandler et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Critical parameters in drug delivery by intravenous infusion
Robert A. Peterfreund et al.
EXPERT OPINION ON DRUG DELIVERY (2013)
Bioresorbable Airway Splint Created with a Three-Dimensional Printer
David A. Zopf et al.
NEW ENGLAND JOURNAL OF MEDICINE (2013)
Orally dissolving strips: A new approach to oral drug delivery system
Rajni Bala et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICAL INVESTIGATION (2013)
Swallowing dysfunction and dysphagia is an unrecognized challenge for oral drug therapy
S. Stegemann et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2012)
Inkjet Printing of Drug Substances and Use of Porous Substrates-Towards Individualized Dosing
Niklas Sandler et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2011)
Long-Acting Reversible Contraceptives Intrauterine Devices and the Contraceptive Implant
Eve Espey et al.
OBSTETRICS AND GYNECOLOGY (2011)
Fast disintegrating tablets: Opportunity in drug delivery system
Ved Parkash et al.
JOURNAL OF ADVANCED PHARMACEUTICAL TECHNOLOGY & RESEARCH (2011)
A flexible technology for modified-release drugs: Multiple-unit pellet system (MUPS)
Shajahan Abdul et al.
JOURNAL OF CONTROLLED RELEASE (2010)
Novel oral fast-disintegrating drug delivery devices with predefined inner structure fabricated by Three-Dimensional Printing
Deng-Guang Yu et al.
JOURNAL OF PHARMACY AND PHARMACOLOGY (2010)
A novel fast disintegrating tablet fabricated by three-dimensional printing
Deng-Guang Yu et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2009)
Three-dimensional printing in pharmaceutics: Promises and problems
Deng Guang Yu et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2008)
Transdermal drug delivery
Mark R. Prausnitz et al.
NATURE BIOTECHNOLOGY (2008)
Development of near zero-order release dosage forms using three-dimensional printing (3-DP (TM)) technology
CC Wang et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2006)
Biodegradable polymer microneedles: Fabrication, mechanics and transdermal drug delivery
JH Park et al.
JOURNAL OF CONTROLLED RELEASE (2005)
Floating drug delivery systems: A review
S Arora et al.
AAPS PHARMSCITECH (2005)
Gastroretentive drug delivery system of ranitidine hydrochloride: Formulation and in vitro evaluation
BS Dave et al.
AAPS PHARMSCITECH (2004)
Oxidants, oxidative stress and the biology of ageing
T Finkel et al.
NATURE (2000)
Biocompatibility of resin-modified filling materials
W Geurtsen
CRITICAL REVIEWS IN ORAL BIOLOGY & MEDICINE (2000)
Multimechanism oral dosage forms fabricated by three dimensional printing™
CW Rowe et al.
JOURNAL OF CONTROLLED RELEASE (2000)
Share Paper
