☆ 4.6 Article

Dissimilar Rotary Friction Welding of Inconel 718 to F22 Using Inconel 625 Interlayer

APPLIED SCIENCES-BASEL (2021)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Analysis of Ni interlayer effects on laser beam welding of dissimilar pure Mo alloy to stainless steel

Xiao-long Gao et al.

Summary: The thickness of Ni interlayer had a significant impact on the chemical composition, microstructure, and mechanical properties of laser welding of Mo and stainless steel. Increasing the thickness of the Ni interlayer led to a decrease in the number of Mo-Fe IMCs, hardness, width and grain size in the heat affected zone, and the thickness of the Mo-Fe IMCs layer, while the tensile strength reached a maximum of 351 MPa. Excessive Ni addition in the welded joint resulted in deteriorated mechanical properties.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and Mechanical Properties of Dissimilar Friction Welding Ti-6Al-4V Alloy to Nitinol

Ateekh Ur Rehman et al.

Summary: The present study utilized friction welding to join dissimilar alloys of Ti-Al-4V to Nitinol, investigating the effect on welded macro and microstructures, hardness, and tensile properties. The formation of an intermetallic compound at the weld interface resulted in poor ultimate tensile strength and elongation values, causing all tensile specimens to fail at the weld interface.

METALS (2021)

Add to Collection

Review Engineering, Industrial

Future research directions in the machining of Inconel 718

Andrea De Bartolomeis et al.

Summary: Inconel 718 is a popular nickel-based superalloy extensively used in aerospace, automotive, and energy industries. However, machining of Inconel 718 remains challenging due to its short tool life and low productivity. Recent advances in cutting tool materials, coatings, geometries, and surface texturing for machining Inconel 718 have been reviewed, with a focus on the thermal conductivity of cutting tool materials. Process control based on sensor data for monitoring machining and detecting anomalies has been identified as crucial for machining safety critical components.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Fiber laser welding of Ti-6Al-4V to Inconel 718 bimetallic structure via Cu/Ta multi-interlayer

Yunfeng Hu et al.

Summary: The study successfully prevented the formation of continuous brittle intermetallic layers of Ti-Ni and Ti-Cu by using Cu/Ta multi-interlayer, resulting in joints with high tensile strength formed with a gradational structure.

VACUUM (2021)

Add to Collection

Article Thermodynamics

The microstructures and mechanical properties of dissimilar laser welding of copper and 316L stainless steel with Ni interlayer

Jijun Xin et al.

Summary: By using Ni interlayer in laser welding, a sound welded joint between copper and 316L stainless steel was achieved with no welding defects and improved mechanical properties. The microstructures showed dendritic grains in the fusion zone without macroscopic segregation, and the joint failed at the copper base material with ductile fracture mode and dimples on the fracture surface at 77 K.

CRYOGENICS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

The superplasticity improvement of Inconel 718 through grain refinement by large reduction cold rolling and two-stage annealing

Xu Yang et al.

Summary: Cold rolling with 84% reduction, followed by two-stage annealing, was effective in refining and homogenizing the grains of Inconel 718, leading to improved superplasticity. The introduction of crystal defects and storage energy during plastic deformation contributed to a dense and fine distribution of delta phase, enhancing the driving force for static recrystallization.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of process parameters on microstructure and properties of laser welded joints of aluminum/steel with Ni/Cu interlayer

Xue-long Cao et al.

Summary: The study showed that the microstructure and properties of the welded joint between 6061 aluminum alloy and stainless steel can be optimized by adjusting the laser power and using different thicknesses of copper foil and nickel foil as interlayer materials. This effectively inhibited the formation of brittle phases, resulting in increased shear force of the welded joint.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of tempering heat treatment on the CO2 corrosion resistance of quench-hardened Cr-Mo low-alloy steels for oil and gas applications

Clara Escriva-Cerdan et al.

CORROSION SCIENCE (2019)

Add to Collection

Review Engineering, Manufacturing

A review of mechanical properties of additively manufactured Inconel 718

E. Hosseini et al.

ADDITIVE MANUFACTURING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of the Interface of an Alloy 625 Overlay on Steels Using Nanoindentation

Tao Dai et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Heat Treatment Parameters on the Microstructure and Properties of Inconel-625 Superalloy

Arjun Sukumaran et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Joining of Inconel 718 and 316 Stainless Steel using electron beam melting additive manufacturing technology

Alejandro Hinojos et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Engineering, Multidisciplinary

Friction welding of AA6061 to AISI 4340 using silver interlayer

Suresh D. Meshram et al.

DEFENCE TECHNOLOGY (2015)

Add to Collection

Article Engineering, Multidisciplinary

An assessment of microstructure, mechanical properties and corrosion resistance of dissimilar welds between Inconel 718 and 310S austenitic stainless steel

A. Mortezaie et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2014)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of Hardfaced Interlayer Thickness and Low Hydrogen Ferritic Capping on Ballistic Performance of Shielded Metal Arc Welded Armour Steel Joints

M. Balakrishnan et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2013)

Add to Collection

Article Engineering, Industrial

Role of nickel as an interlayer in dissimilar metal friction welding of maraging steel to low alloy steel

G. Madhusudhan Reddy et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Continuous drive friction welding of Inconel 718 and EN24 dissimilar metal combination

S. Vardhan Lalam et al.

MATERIALS SCIENCE AND TECHNOLOGY (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Nickel based superalloy welding practices for industrial gas turbine applications

MB Henderson et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.