4.7 Article

Effectiveness of antiviral metal and metal oxide thin-film coatings against human coronavirus 229E

Related references

Note: Only part of the references are listed.
Article Environmental Sciences

Detection of SARS-CoV-2 RNA on public surfaces in a densely populated urban area of Brazil: A potential tool for monitoring the circulation of infected patients

Jonatas Santos Abrahao et al.

Summary: The world is currently facing the worst global health crisis since December 2019, with over 30 million cases and 950 thousand deaths due to the COVID-19 disease caused by SARS-CoV-2. A study in a densely populated urban area in Brazil found SARS-CoV-2 RNA contamination on public surfaces, indicating the need for continuous monitoring and measures to address the risk.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Nanoscience & Nanotechnology

Cupric Oxide Coating That Rapidly Reduces Infection by SARS-CoV-2 via Solids

Mohsen Hosseini et al.

Summary: The ongoing COVID-19 pandemic has created a demand for coatings that reduce surface infection, and a cupric oxide anti-SARS-CoV-2 coating has been developed with unique features such as rapid inactivation and hydrophilicity.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Copper@ZIF-8 Core-Shell Nanowires for Reusable Antimicrobial Face Masks

Abhishek Kumar et al.

Summary: This study presents a novel material for medical-grade masks filtration media with antimicrobial activity, including copper@ZIF-8 core-shell nanowires to enhance the masks' ability to resist bacteria and viruses. Experimental results demonstrate that Cu@ZIF-8 NWs have a good effect in inhibiting SARS-CoV-2 virus replication.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Photoactive Antiviral Face Mask with Self-Sterilization and Reusability

Sumit Kumar et al.

Summary: In response to the increased demand for surgical masks during the COVID-19 pandemic, researchers have developed a dual-channel spray-assisted nanocoating hybrid of shellac/copper nanoparticles to enhance the hydrophobicity of nonwoven surgical masks. This innovative coating provides photoactivity for antimicrobial action, allowing the masks to be reusable and self-sterilizing. The photoactive antiviral mask (PAM) design effectively generates heat and free radicals under solar illumination to disrupt virus-like particles, making the masks self-cleaning and reusable for prolonged protection against viral aerosols.

NANO LETTERS (2021)

Article Virology

Inactivation of Human Coronavirus by Titania Nanoparticle Coatings and UVC Radiation: Throwing Light on SARS-CoV-2

Svetlana Khaiboullina et al.

Summary: The global outbreak of COVID-19 caused by SARS-CoV-2 has led to mass vaccinations, but effective disease control strategies and safety precautions remain critical. Photocatalytic self-disinfecting/cleaning surfaces show promise in guiding disinfection policies to control virus spread.

VIRUSES-BASEL (2021)

Review Biochemical Research Methods

On the emergence of antibacterial and antiviral copper cold spray coatings

Bryer C. Sousa et al.

Summary: This literature review evaluates and compares the antipathogenic and antiviral properties of copper cold spray surfaces, discussing their effectiveness as preventative measures against pathogen transmission. Additionally, various alternative antimicrobial coatings that do not rely on copper are detailed in the text.

JOURNAL OF BIOLOGICAL ENGINEERING (2021)

Article Chemistry, Multidisciplinary

Rapid and Repetitive Inactivation of SARS-CoV-2 and Human Coronavirus on Self-Disinfecting Anionic Polymers

Bharadwaja S. T. Peddinti et al.

Summary: Research shows that a diverse family of nanostructured anionic polymers can rapidly inactivate coronaviruses within minutes. Applying these polymers to frequently touched surfaces in medical, educational, and public transportation facilities, or personal protective equipment, can provide rapid and continuous protection.

ADVANCED SCIENCE (2021)

Article Materials Science, Multidisciplinary

The interplay between atmospheric corrosion and antimicrobial efficiency of Cu and Cu5Zn5Al1Sn during simulated high-touch conditions

Tingru Chang et al.

Summary: The study reveals that the antibacterial efficiency of bare Cu and Cu5Zn5Al1Sn varies under different surface conditions, with complete bacteria inhibition achieved faster on Cu than on Cu5Zn5Al1Sn. The antibacterial efficiency slightly increases with copper release rate, and it is governed by complex interactions between the corroded metal surface, bacteria, and extracellular polymeric substances produced by the bacteria.

CORROSION SCIENCE (2021)

Review Environmental Sciences

A systematic review of human coronaviruses survival on environmental surfaces

Filippo Marzoli et al.

Summary: This systematic review summarizes evidence on the survival of coronaviruses on surfaces, showing that viruses can survive for weeks on different materials, with SARS-CoV-2 surviving up to 21 days on polymer banknotes, steel, glass, and paper banknotes. Environmental conditions like temperature and humidity can affect virus survival, while sunlight exposure significantly reduces the risk of surface transmission.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Public, Environmental & Occupational Health

Virus matrix interference on assessment of virucidal activity of high-touch surfaces designed to prevent hospital-acquired infections

Sadru-Dean Walji et al.

Summary: The study showed that a copper-nickel-zinc alloy has strong virucidal effects for enveloped viruses, with copper, nickel, and zinc ions leaching from the alloy surface. However, virucidal activity was lost under high soiling conditions. The results suggest that ion leaching is associated with virucidal activity in both wet and dried virus conditions.

ANTIMICROBIAL RESISTANCE AND INFECTION CONTROL (2021)

Review Environmental Sciences

Nanomaterials for Airborne Virus Inactivation: A Short Review

Rong Li et al.

Summary: The outbreak of the COVID-19 pandemic at the end of 2019 has caused significant human casualties and economic losses, with aerosol transmission identified as a major pathway. Effective control measures are urgently needed. Nanomaterials with antiviral capabilities, particularly in inactivating viruses in the air, have been extensively studied and offer potential in controlling virus transmission.

AEROSOL SCIENCE AND ENGINEERING (2021)

Article Materials Science, Coatings & Films

Thermal Spray Copper Alloy Coatings as Potent Biocidal and Virucidal Surfaces

J. Mostaghimi et al.

Summary: This review explores the use of thermal spray technology to coat surfaces in healthcare and public settings for inhibiting pathogen transmission. Emphasis is placed on the influence of coating structure, porosity, and roughness on biocidal activity, and the implications of using this knowledge to optimize copper coatings for irreversibly inactivating viral pathogens. Additionally, the long-term performance of copper alloy coatings in real hospital settings in Canada and Peru is discussed.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2021)

Article Engineering, Environmental

Humidity-Dependent Decay of Viruses, but Not Bacteria, in Aerosols and Droplets Follows Disinfection Kinetics

Kaisen Lin et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Article Chemistry, Physical

Synthesis and characterization of Cu2O nanoparticles

Manab Mallik et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Review Public, Environmental & Occupational Health

Persistence of coronaviruses on inanimate surfaces and their inactivation with biocidal agents

G. Kampf et al.

JOURNAL OF HOSPITAL INFECTION (2020)

Review Public, Environmental & Occupational Health

A critical evaluation of current protocols for self-sterilizing surfaces designed to reduce viral nosocomial infections

Sadru-Dean Walji et al.

AMERICAN JOURNAL OF INFECTION CONTROL (2020)

Article Materials Science, Multidisciplinary

Optimization of Antibacterial Properties of Hybrid Metal-Sputtered Superhydrophobic Surfaces

Dionysia Kefallinou et al.

COATINGS (2020)

Article Multidisciplinary Sciences

Detection of air and surface contamination by SARS-CoV-2 in hospital rooms of infected patients

Po Ying Chia et al.

NATURE COMMUNICATIONS (2020)

Letter Medicine, General & Internal

Aerosol and Surface Stability of SARS-CoV-2 as Compared with SARS-CoV-1

Neeltje van Doremalen et al.

NEW ENGLAND JOURNAL OF MEDICINE (2020)

Article Nanoscience & Nanotechnology

A Surface Coating that Rapidly Inactivates SARS-CoV-2

Saeed Behzadinasab et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Editorial Material Engineering, Chemical

Transmission via aerosols: Plausible differences among emerging coronaviruses

Jingkun Jiang et al.

AEROSOL SCIENCE AND TECHNOLOGY (2020)

Review Infectious Diseases

Transmission of SARS-CoV-2: an update of current literature

Kishan P. Patel et al.

EUROPEAN JOURNAL OF CLINICAL MICROBIOLOGY & INFECTIOUS DISEASES (2020)

Article Public, Environmental & Occupational Health

Environmental surface testing for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) during prolonged isolation of an asymptomatic carrier

Kyeong Seob Shin et al.

INFECTION CONTROL AND HOSPITAL EPIDEMIOLOGY (2020)

Article Green & Sustainable Science & Technology

Future antiviral surfaces: Lessons from COVID-19 pandemic

Ziqi Sun et al.

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2020)

Article Environmental Sciences

Relative contributions of transmission routes for COVID-19 among healthcare personnel providing patient care

Rachael M. Jones

JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2020)

Article Environmental Sciences

On airborne transmission and control of SARS-Cov-2

Maosheng Yao et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Article Materials Science, Biomaterials

Antiviral Nanostructured Surfaces Reduce the Viability of SARS-CoV-2

Jafar Hasan et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)

Article Multidisciplinary Sciences

Promising Nanostructured Materials against Enveloped Virus

Gabriel G. De Toledo et al.

ANAIS DA ACADEMIA BRASILEIRA DE CIENCIAS (2020)

Article Biochemistry & Molecular Biology

Potent antiviral effect of silver nanoparticles on SARS-CoV-2

Sundararaj S. Jeremiah et al.

BIOCHEMICAL AND BIOPHYSICAL RESEARCH COMMUNICATIONS (2020)

Article Public, Environmental & Occupational Health

Detection of Novel Coronavirus on the Surface of Environmental Materials Contaminated by COVID-19 Patients in the Republic of Korea

Sang-Eun Lee et al.

OSONG PUBLIC HEALTH AND RESEARCH PERSPECTIVES (2020)

Article Engineering, Manufacturing

Sars-CoV-2 (COVID-19) inactivation capability of copper-coated touch surface fabricated by cold-spray technology

Novana Hutasoit et al.

MANUFACTURING LETTERS (2020)

Review Chemistry, Multidisciplinary

Speeding up the unique assets of atomic layer deposition

D. Munoz-Rojas et al.

MATERIALS TODAY CHEMISTRY (2019)

Article Multidisciplinary Sciences

Physico-chemical characteristics of evaporating respiratory fluid droplets

Eric P. Vejerano et al.

JOURNAL OF THE ROYAL SOCIETY INTERFACE (2018)

Article Energy & Fuels

Band gap engineering of atomic layer deposited ZnxSn1-xO buffer for efficient Cu(In,Ga)Se-2 solar cell

Raphael Edem Agbenyeke et al.

PROGRESS IN PHOTOVOLTAICS (2018)

Article Multidisciplinary Sciences

Rapid in situ assessment of Cu-ion mediated effects and antibacterial efficacy of copper surfaces

Merilin Rosenberg et al.

SCIENTIFIC REPORTS (2018)

Article Biochemistry & Molecular Biology

Silver Oxide Coatings with High Silver-Ion Elution Rates and Characterization of Bactericidal Activity

Sarah S. Goderecci et al.

MOLECULES (2017)

News Item Public, Environmental & Occupational Health

Copper lowers risk of norovirus outbreaks

[Anonymous]

PERSPECTIVES IN PUBLIC HEALTH (2013)

Article Multidisciplinary Sciences

Inactivation of Norovirus on Dry Copper Alloy Surfaces

Sarah L. Warnes et al.

PLOS ONE (2013)

Article Engineering, Environmental

Highly efficient antiviral and antibacterial activities of solid-state cuprous compounds

Kayano Sunada et al.

JOURNAL OF HAZARDOUS MATERIALS (2012)

Article Biochemistry & Molecular Biology

Photocatalytic inactivation of influenza virus by titanium dioxide thin film

Ryuichi Nakano et al.

PHOTOCHEMICAL & PHOTOBIOLOGICAL SCIENCES (2012)

Article Materials Science, Multidisciplinary

Crystallization and electrical resistivity of Cu2O and CuO obtained by thermal oxidation of Cu thin films on SiO2/Si substrates

L. De Los Santos Valladares et al.

THIN SOLID FILMS (2012)

Article Nanoscience & Nanotechnology

Physico-chemical and antimicrobial properties of co-sputtered Ag-Au/PTFE nanocomposite coatings

V. Zaporojtchenko et al.

NANOTECHNOLOGY (2006)

Review Biochemistry & Molecular Biology

Copper as a biocidal tool

G Borkow et al.

CURRENT MEDICINAL CHEMISTRY (2005)

Article Biochemistry & Molecular Biology

Putting copper into action: copper-impregnated products with potent biocidal activities

G Borkow et al.

FASEB JOURNAL (2004)

Article Immunology

Severe acute respiratory syndrome coronavirus on hospital surfaces

SF Dowell et al.

CLINICAL INFECTIOUS DISEASES (2004)