4.7 Article

Bio-Inspired Hierarchical Carbon Nanotube Yarn with Ester Bond Cross-Linkages towards High Conductivity for Multifunctional Applications

Related references

Note: Only part of the references are listed.
Article Materials Science, Textiles

Highly stretchable electro-conductive yarn via wrapping carbon nanotube yarn on multifilament polyester yarn

Xiaoxiao Wei et al.

Summary: This study presents a highly stretchable and stable electro-conductive yarn by wrapping carbon nanotube yarn on a multifilament polyester yarn. The wrapping yarn shows significantly higher tensile force and strain compared to pristine carbon nanotube yarn, and exhibits minimal resistance changes after cyclic loading. It also demonstrates steady-state temperature and quick electro-thermal response when voltage is applied. This wrapping yarn retains its electro-thermal stability under various deformations when sewn into gloves.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

Article Materials Science, Multidisciplinary

Wet cryogenic modification of the carbon nanotube assembly inspired by frozen Chinese Doufu recipe

Huan Ma et al.

Summary: This study demonstrated an innovative physical strategy of wet cryogenic treatment to improve the properties of porous CNT assembly, leading to enhanced tensile strength, toughness, and strain sensitivity.

MATERIALS LETTERS (2021)

Article Thermodynamics

Relation of the Electrical Conductivity and the Thermal Conductivity to the Young's Modulus of Buckypapers

Bokang Mu et al.

Summary: This study investigates the effects of annealing on the properties of Buckypapers, showing that annealing improves the quality of carbon nanotubes and leads to increased Young's modulus, electrical conductivity, and thermal conductivity of BPs. The enhancements in conductivity are attributed to the enhancement of inter-tube contact after annealing.

INTERNATIONAL JOURNAL OF THERMOPHYSICS (2021)

Article Chemistry, Multidisciplinary

Analysis of the Piezoelectric Properties of Aligned Multi-Walled Carbon Nanotubes

Marina Il'ina et al.

Summary: Recent studies have shown anomalous piezoelectric properties in carbon nanostructures, particularly in carbon nanotubes (CNTs) with initial significant curvature. The study investigates the relationship between the effective piezoelectric coefficient of CNTs, their defectiveness, and diameter, which affects the curvature of the graphene sheet surface. Calculated values of the effective piezoelectric coefficient of CNTs range from 0.019 to 0.413 C/m(2) depending on their defects and diameter.

NANOMATERIALS (2021)

Review Chemistry, Multidisciplinary

Applications of Pristine and Functionalized Carbon Nanotubes, Graphene, and Graphene Nanoribbons in Biomedicine

Maria G. Burdanova et al.

Summary: This review comprehensively describes the chemical functionalization routes and applications of carbon nanomaterials, highlighting methods to improve their functionalities and discussing their applications in bioimaging, drug delivery, and biosensors. Additionally, toxicity studies and future directions for development are presented.

NANOMATERIALS (2021)

Article Materials Science, Multidisciplinary

Light-weight strain sensor based on carbon nanotube/epoxy composite yarn

Huan Ma et al.

Summary: The study developed a highly sensitive carbon nanotube composite yarn through a quick coating process, which shows potential applications in detecting movement of the finger, elbow joint, and facial micro-expressions.

JOURNAL OF MATERIALS SCIENCE (2021)

Article Engineering, Manufacturing

Highly stretchable, fast thermal response carbon nanotube composite heater

Fujun Xu et al.

Summary: This study developed a highly stretchable and efficient CNT heater with good thermal response and conductivity stability even under repeated deformation, showing potential as an external heating source for batteries in low temperatures. The flexible and wearable design of the heater offers promising opportunities for thermal management in wearable applications.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Article Materials Science, Composites

Characterization and comparison of properties of cryogenic conditioned CNT reinforced thermoset (epoxy) and thermoplastic (poly vinyl alcohol) composite yarns

Wei Chen et al.

Summary: The study demonstrates that carbon nanotube (CNT) fiber/yarn reinforced composites have potential applications in aerospace and space industry. The mechanical and electrical properties of CNT/EP and CNT/PVA composite yarns were enhanced after low-temperature treatment, but showed different changes after multiple cyclic cryogenic conditions.

JOURNAL OF COMPOSITE MATERIALS (2021)

Article Biochemical Research Methods

A low-voltage electro-membrane extraction for quantification of imatinib and sunitinib in biological fluids

Ali Zeraatkar Moghaddam et al.

Summary: The aim of this study was to modify a hollow-fiber-based supported liquid membrane with nanostructures like graphite, graphene oxide, or nitrogen-doped graphene oxide for electro-membrane extraction of imatinib and sunitinib from biological fluids. By using conductive nanostructures, a low-voltage EME device was successfully fabricated. A response surface methodology was employed to optimize extraction conditions, leading to successful quantification of imatinib and sunitinib in biological fluids.

BIOANALYSIS (2021)

Article Chemistry, Multidisciplinary

Understanding the Mechanical and Conductive Properties of Carbon Nanotube Fibers for Smart Electronics

Xiaohua Zhang et al.

ADVANCED MATERIALS (2020)

Review Chemistry, Multidisciplinary

Smart Textile-Integrated Microelectronic Systems for Wearable Applications

Jidong Shi et al.

ADVANCED MATERIALS (2020)

Review Chemistry, Multidisciplinary

Carbon Nanotube Yarn for Fiber-Shaped Electrical Sensors, Actuators, and Energy Storage for Smart Systems

Yongwoo Jang et al.

ADVANCED MATERIALS (2020)

Article Materials Science, Composites

Movable cross-linked elastomer with aligned carbon nanotube/nanofiber as high thermally conductive tough flexible composite

Taku Goto et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

Bioinspired microstructure-reorganized behavior of carbon nanotube yarn induced by cyclic stretching training

Zhiyong Wang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Article Chemistry, Physical

Carbon nanotube yarn based thermoelectric textiles for harvesting thermal energy and powering electronics

Yuanyuan Zheng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Review Chemistry, Physical

Direct spinning of CNT fibres: Past, present and future scale up

Fiona Smail et al.

CARBON (2019)

Article Materials Science, Multidisciplinary

Synthesis and mechanism perspectives of a carbon nanotube aerogel via a floating catalyst chemical vapour deposition method

Hayder Baqer Abdullah et al.

BULLETIN OF MATERIALS SCIENCE (2019)

Article Chemistry, Physical

Quasi-static and dynamic interfacial evaluations of plasma functionalized carbon nanotube fiber

Yiqin Shao et al.

APPLIED SURFACE SCIENCE (2019)

Article Materials Science, Textiles

Strain sensing fabric integrated with carbon nanotube yarn for wearable applications

Wei Liu et al.

TEXTILE RESEARCH JOURNAL (2019)

Article Chemistry, Physical

Oxidative acid treatment of carbon nanotubes

Nurettin Sezer et al.

SURFACES AND INTERFACES (2019)

Article Chemistry, Physical

Multifunctional fabrics of carbon nanotube fibers

Xiaogang Luo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Materials Science, Multidisciplinary

Optimal sidewall functionalization for the growth of ultrathin TiO2 nanotubes via atomic layer deposition

D. Dominguez et al.

JOURNAL OF MATERIALS SCIENCE (2018)

Article Nanoscience & Nanotechnology

Multifunctional Wearable Electronic Textiles Using Cotton Fibers with Polypyrrole and Carbon Nanotubes

Ravi M. A. P. Lima et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Engineering, Manufacturing

Flexible strain sensor based on aerogel-spun carbon nanotube yarn with a core-sheath structure

Wei Li et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Article Chemistry, Multidisciplinary

Tailored Degree of Functionalization and Length Preservation of Multiwalled Carbon Nanotubes by an Optimized Acid Treatment Process

Vinicius G. Castro et al.

JOURNAL OF THE BRAZILIAN CHEMICAL SOCIETY (2017)

Article Nanoscience & Nanotechnology

Highly Stretchable Graphene Fibers with Ultrafast Electrothermal Response for Low-Voltage Wearable Heaters

Ran Wang et al.

ADVANCED ELECTRONIC MATERIALS (2017)

Review Nanoscience & Nanotechnology

An Overview of Carbon Nanotubes and Graphene for Biosensing Applications

Zanzan Zhu

NANO-MICRO LETTERS (2017)

Review Nanoscience & Nanotechnology

An Overview of Carbon Nanotubes and Graphene for Biosensing Applications

Zanzan Zhu

NANO-MICRO LETTERS (2017)

Article Chemistry, Physical

An investigation into the surface heterogeneity of nitric acid oxidized carbon fiber

Andrea L. Woodhead et al.

APPLIED SURFACE SCIENCE (2017)

Article Physics, Applied

Preparation of flexible carbon nanotube ropes for low-voltage heat generator

Bao Jun Han et al.

APPLIED PHYSICS LETTERS (2017)

Article Polymer Science

Stretchable conductive films based on carbon nanomaterials prepared by spray coating

Qiang Bu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2016)

Article Chemistry, Multidisciplinary

Carbon-Nanotube Fibers for Wearable Devices and Smart Textiles

Jiangtao Di et al.

ADVANCED MATERIALS (2016)

Article Materials Science, Multidisciplinary

Effect of thermal treatments on structures and mechanical properties of aerogel-spun carbon nanotube fibers

Wei Li et al.

MATERIALS LETTERS (2016)

Review Chemistry, Multidisciplinary

Electrical Properties of Carbon Nanotube Based Fibers and Their Future Use in Electrical Wiring

Agnieszka Lekawa-Raus et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Article Materials Science, Multidisciplinary

Functionalization of carbon nanotube yarn by acid treatment

H. E. Misak et al.

INTERNATIONAL JOURNAL OF SMART AND NANO MATERIALS (2014)

Article Chemistry, Multidisciplinary

Carbon Nanotube Sidewall Functionalization with Carbonyl Compounds-Modified Birch Conditions vs the Organometallic Reduction Approach

Benjamin Gebhardt et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Article Multidisciplinary Sciences

Iodine doped carbon nanotube cables exceeding specific electrical conductivity of metals

Yao Zhao et al.

SCIENTIFIC REPORTS (2011)

Article Nanoscience & Nanotechnology

Carbon nanotube yarns with high tensile strength made by a twisting and shrinking method

Kai Liu et al.

NANOTECHNOLOGY (2010)

Article Chemistry, Multidisciplinary

Composite Yarns of Multiwalled Carbon Nanotubes with Metallic Electrical Conductivity

Lakshman K. Randeniya et al.

SMALL (2010)

Article Nanoscience & Nanotechnology

Fabrication and characterization of carbon/epoxy composites mixed with multi-walled carbon nanotubes

Yuanxin Zhou et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Review Chemistry, Multidisciplinary

Chemically functionalized carbon nanotubes

K Balasubramanian et al.

SMALL (2005)