Related references
Note: Only part of the references are listed.Evaluation of the sliding wear and corrosion performance of triode-plasma nitrided Fe-17Cr-20Mn-0.5N high-manganese and Fe-19Cr-35Ni-1.2Si high-nickel austenitic stainless steels
Xiao Tao et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Microstructure of perfect nitrogen-expanded austenite formed by unconstrained nitriding
H. L. Che et al.
SCRIPTA MATERIALIA (2021)
Stability of Zener order in martensite: an atomistic evidence
Philippe Maugis et al.
SCRIPTA MATERIALIA (2021)
Surface Modification of a Nickel-Free Austenitic Stainless Steel by Low-Temperature Nitriding
Francesca Borgioli et al.
METALS (2021)
Formation and Properties of Nitrocarburizing S-Phase on AISI 316L Stainless Steel-Based WC Composite Layers by Low-Temperature Plasma Nitriding
Shinichiro Adachi et al.
METALS (2021)
Crevice and pitting corrosion of low temperature plasma nitrided UNS S32750 super duplex stainless steel
Oriana Palma Calabokis et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Effect of heat treatment on the chromium-depleted zones of a high carbon martensitic stainless steel
Jordanio S. Siqueira et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2021)
Sequential low-temperature plasma-assisted thermochemical treatments of the AISI 420 martensitic stainless steel
C. Ristiano Jose Scheuer et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Effect of nitrogen plasma immersion ion implantation on the corrosion protection mechanisms of different stainless steels
Leonardo Augusto Luiz et al.
MATERIALS TODAY COMMUNICATIONS (2021)
Low-Temperature Nitridation of 2205 Duplex Stainless Steel
J. C. Dalton et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
From Austenitic Stainless Steel to Expanded Austenite-S Phase: Formation, Characteristics and Properties of an Elusive Metastable Phase
Francesca Borgioli
METALS (2020)
Low-Temperature Plasma Nitriding for Austenitic Stainless Steel Layers with Various Nickel Contents Fabricated via Direct Laser Metal Deposition
Shinichiro Adachi et al.
COATINGS (2020)
Tetragonality of Fe-C martensite - a pattern matching electron backscatter diffraction analysis compared to X-ray diffraction
Tomohito Tanaka et al.
ACTA MATERIALIA (2020)
A simple model for nitrogen-induced lattice expansion ofγ'NandγNphases in Fe-Cr-Ni alloys with different chromium contents
H. L. Che et al.
PHILOSOPHICAL MAGAZINE LETTERS (2020)
On the interstitial induced lattice inhomogeneities in nitrogen-expanded austenite
Xiao Tao et al.
SCRIPTA MATERIALIA (2020)
The Anisotropic Stress-Induced Diffusion and Trapping of Nitrogen in Austenitic Stainless Steel during Nitriding
Arvaidas Galdikas et al.
METALS (2020)
Mechanical properties and corrosion resistance of αN-rich layers produced by PIII on a super ferritic stainless steel
Bruna C. E. Schibicheski Kurelo et al.
SURFACE & COATINGS TECHNOLOGY (2020)
What causes the colossal C supersaturation of δ-ferrite in stainless steel during low-temperature carburization?
K. N. Sasidhar et al.
SCRIPTA MATERIALIA (2019)
AISI 420 martensitic stainless steel corrosion resistance enhancement by low-temperature plasma carburizing
C. J. Scheuer et al.
ELECTROCHIMICA ACTA (2019)
Wear and Corrosion Resistances of Active Screen Plasma-Nitrided Duplex Stainless Steels
Giuseppe Pintaude et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Effect of Adjusted Gas Nitriding Parameters on Microstructure and Wear Resistance of HVOF-Sprayed AISI 316L Coatings
Pia Kutschmann et al.
MATERIALS (2019)
Effect of ionic plasma nitriding process on the corrosion and micro-abrasive wear behavior of AISI 316L austenitic and AISI 470 super-ferritic stainless steels
Elieser de Araujo Junior et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Thermodynamic reasoning for colossal N supersaturation in austenitic and ferritic stainless steels during low-temperature nitridation
K. N. Sasidhar et al.
SCIENTIFIC REPORTS (2019)
Co-existence of γ′N phase and γN phase on nitrided austenitic Fe-Cr-Ni alloys- I. experiment
H. L. Che et al.
ACTA MATERIALIA (2019)
Is expanded austenite really a solid solution? Mossbauer observation of an annealed AISI 316L nitrided sample
T. Czerwiec et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Characteristics of carbon-expanded α phase layer on AISI 431 stainless steel using experimental and fist-principles calculation methods
R. L. Liu et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Comparison of Microstructure and Hardness between High-carbon and High-nitrogen Martensites
Toshihiro Tsuchiyama et al.
ISIJ INTERNATIONAL (2019)
Ultra-low-to high-temperature plasma-assisted nitriding: revisiting and going further on the martensitic stainless steel treatment
C. J. Scheuer et al.
MATERIALS RESEARCH EXPRESS (2019)
The influence of stacking fault energy on plasticity mechanisms in triode-plasma nitrided austenitic stainless steels: Implications for the structure and stability of nitrogen-expanded austenite
Xiao Tao et al.
ACTA MATERIALIA (2019)
On the S-phase formation and the balanced plasma nitriding of austenitic-ferritic super duplex stainless steel
Willian R. de Oliveira et al.
APPLIED SURFACE SCIENCE (2018)
Revised thermodynamic description of the Fe-Cr system based on an improved sublattice model of the σ phase
Aurelie Jacob et al.
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2018)
Study of plasma nitriding and nitrocarburising of AISI 430F stainless steel for high hardness and corrosion resistance
J. Alphonsa et al.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2018)
Corrosion behaviour of low temperature nitrided nickel-free, AISI 200 and AISI 300 series austenitic stainless steels in NaCl solution
Francesca Borgioli et al.
CORROSION SCIENCE (2018)
Martensite coarsening in low-temperature plasma carburizing
S. F. Brunatto et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Performance of nitrogen ion-implanted supermartensitic stainless steel in chlorine- and hydrogen-rich environments
Bruna C. E. Schibicheski Kurelo et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Wear and Corrosion Properties of Cold-Sprayed AISI 316L Coatings Treated by Combined Plasma Carburizing and Nitriding at Low Temperature
Shinichiro Adachi et al.
COATINGS (2018)
Residual Stress in Expanded Austenite on Stainless Steel; Origin, Measurement, and Prediction
Marcel A. J. Somers et al.
MATERIALS PERFORMANCE AND CHARACTERIZATION (2018)
Hardening of HVOF-Sprayed Austenitic Stainless-Steel Coatings by Gas Nitriding
Thomas Lindner et al.
COATINGS (2018)
The Formation of Martensitic Austenite During Nitridation of Martensitic and Duplex Stainless Steels
Amirali Zangiabadi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Characterization of simultaneous aged and plasma nitrided 17-4 PH stainless steel
Hamidreza Riazi et al.
MATERIALS CHARACTERIZATION (2017)
Development and microstructure characterization of single and duplex nitriding of UNS S31803 duplex stainless steel
A. P. Tschiptschin et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Performance enhancement by plasma nitriding at low gas pressure for 304 austenitic stainless steel
Shijing Lu et al.
VACUUM (2017)
Scratch resistance of low-temperature plasma nitrided and carburized martensitic stainless steel
Ane C. Rovani et al.
WEAR (2017)
Composition-dependent variation of magnetic properties and interstitial ordering in homogeneous expanded austenite
Bastian K. Brink et al.
ACTA MATERIALIA (2016)
Cultures and co-cultures of human blood mononuclear cells and endothelial cells for the biocompatibility assessment of surface modified AISI 316L austenitic stainless steel
Maria Stio et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Modelling the evolution of composition-and stress-depth profiles in austenitic stainless steels during low-temperature nitriding
Freja N. Jespersen et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2016)
On the Carbon Solubility in Expanded Austenite and Formation of Hagg Carbide in AISI 316 Stainless Steel
Thomas L. Christiansen et al.
STEEL RESEARCH INTERNATIONAL (2016)
Effect of the amount of CH4 gas on the characteristics of surface layers of low temperature plasma nitrided martensitic precipitation-hardening stainless steel
Abhik Barua et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Thermal stability investigation of expanded martensite
Fazel Baniasadi et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Low temperature active screen plasma nitriding of 17-4 PH stainless steel
Carlos Eduardo Pinedo et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Low temperature nitriding of AISI 300 and 200 series austenitic stainless steels
Francesca Borgioli et al.
VACUUM (2016)
High-density stacking faults in a supersaturated nitrided layer on austenitic stainless steel
Ke Tong et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2016)
Surface modification of austenitic thermal-spray coatings by low-temperature nitrocarburizing
T. Lindner et al.
18TH CHEMNITZ SEMINAR ON MATERIALS ENGINEERING (2016)
Colossal interstitial supersaturation in delta ferrite in stainless steels I. Low-temperature carburization
D. Wang et al.
ACTA MATERIALIA (2015)
Study of plasma nitriding and nitrocarburizing for higher corrosion resistance and hardness of 2205 duplex stainless steel
J. Alphonsa et al.
CORROSION SCIENCE (2015)
Properties of the Passive Film Formed on Interstitially Hardened AISI 316L Stainless Steel
W. Niu et al.
ELECTROCHIMICA ACTA (2015)
Formation of Expanded Austenite on a Cold-Sprayed AISI 316L Coating by Low-Temperature Plasma Nitriding
Shinichiro Adachi et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2015)
Atom probe tomography characterization of nitrogen induced decomposition in low temperature plasma nitrided 304L austenitic stainless steel
A. Martinavicius et al.
MATERIALS LETTERS (2015)
On the Nitrogen Diffusion in a Duplex Stainless Steel
Margarita Bobadilla et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2015)
Low-temperature Plasma Assisted Thermochemical Treatments of AISI 420 Steel: Comparative Study of Obtained Layers
Cristiano Jose Scheuer et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2015)
Martensitic Stainless Steels Low-temperature Nitriding: Dependence of Substrate Composition
Lauro Mariano Ferreira et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2015)
Influence of Microstructure and Process Conditions on Simultaneous Low-Temperature Surface Hardening and Bulk Precipitation Hardening of NanoflexA®
Federico Bottoli et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Diffusion profiles after nitrocarburizing austenitic stainless steel
D. Wu et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Effect of plasma nitriding on the strength of fine protrusions formed by sputter etching of AISI type 420 stainless steel
Keijiro Nakasa et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Low-temperature plasma nitrocarburizing of the AISI 420 martensitic stainless steel: Microstructure and process kinetics
A. D. Anjos et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Cavitation erosion resistance and wear mechanisms of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel
L. A. Espitia et al.
WEAR (2015)
Orientation dependence of nitrogen supersaturation in austenitic stainless steel during low-temperature gas-phase nitriding
D. Wu et al.
ACTA MATERIALIA (2014)
Influence of surface morphology and roughness on water wetting properties of low temperature nitrided austenitic stainless steels
Francesca Borgioli et al.
MATERIALS CHARACTERIZATION (2014)
Analysis of sliding wear tests of plasma processed AISI 316L steel
Michelle C. S. Duarte et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Combined plasma carburizing and nitriding of sprayed AISI 316L steel coating for improved wear resistance
Shinichiro Adachi et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Nitriding of Stainless Steels i
Luiz Carlos Casteletti et al.
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2014)
Monitoring the near-surface pH to probe the role of nitrogen in corrosion behaviour of low-temperature plasma nitrided 316L stainless steel
I. Flis-Kabulska et al.
ELECTROCHIMICA ACTA (2013)
A novel rapid DC plasma nitriding at low gas pressure for 304 austenitic stainless steel
Shukai Wang et al.
MATERIALS LETTERS (2013)
A review on nickel-free nitrogen containing austenitic stainless steels for biomedical applications
Mohd Talha et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Effects of the Process Parameters on the Microstructure and Properties of Nitrided 17-4PH Stainless Steel
Jun Wang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2013)
Isotope exchange investigation of nitrogen redistribution in expanded austenite
T. L. Christiansen et al.
SCRIPTA MATERIALIA (2013)
Low-temperature plasma nitriding of AISI F51 duplex stainless steel
Carlos Eduardo Pinedo et al.
SURFACE & COATINGS TECHNOLOGY (2013)
AISI 420 martensitic stainless steel low-temperature plasma assisted carburizing kinetics
C. J. Scheuer et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Influence of the countermaterial on the dry sliding friction and wear behaviour of low temperature carburized AISI316L steel
L. Ceschini et al.
TRIBOLOGY INTERNATIONAL (2013)
Cavitation erosion resistance of low temperature plasma nitrided martensitic stainless steel
L. A. Espitia et al.
WEAR (2013)
Low temperature plasma carburizing of AISI 316L austenitic stainless steel and AISI F51 duplex stainless steel
Carlos Eduardo Pinedo et al.
REM-REVISTA ESCOLA DE MINAS (2013)
Nitrogen interstitial diffusion induced decomposition in AISI 304L austenitic stainless steel
A. Martinavicius et al.
ACTA MATERIALIA (2012)
Corrosion properties of S-phase layers formed on medical grade austenitic stainless steel
Joseph Buhagiar et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2012)
Effect of Nitrogen on Semiconducting Properties of Passive Films of a High Nitrogen Face-Centered-Cubic Phase Formed on Austenitic Stainless Steel
X. M. Zhu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Cathodic Cage Nitriding of AISI 409 Ferritic Stainless Steel with the Addition of CH4
Romulo Ribeiro Magalhaes de Sousa et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2012)
Strong evidences of tempered martensite-to-nitrogen-expanded austenite transformation in CA-6NM steel
A. N. Allenstein et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Low-temperature plasma carburizing of AISI 420 martensitic stainless steel: Influence of gas mixture and gas flow rate
C. J. Scheuer et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Interstitial hardening of duplex 2205 stainless steel by low temperature carburisation: enhanced mechanical and electrochemical performance
H. Kahn et al.
SURFACE ENGINEERING (2012)
Formation of S-phase layer on plasma sprayed AISI 316L stainless steel coating by plasma nitriding at low temperature
Shinichiro Adachi et al.
THIN SOLID FILMS (2012)
Improvement of corrosion resistance of austenitic stainless steels by means of glow-discharge nitriding
Alessio Fossati et al.
CORROSION REVIEWS (2011)
Extended X-Ray Absorption Fine Structure Investigation of Carbon Stabilized Expanded Austenite and Carbides in Stainless Steel AISI 316
Jette Oddershede et al.
STEEL RESEARCH INTERNATIONAL (2011)
Corrosion behaviour of low temperature plasma carburised 316L stainless steel in chloride containing solutions
Y. Sun
CORROSION SCIENCE (2010)
S-phase surface engineering of Fe-Cr, Co-Cr and Ni-Cr alloys
H. Dong
INTERNATIONAL MATERIALS REVIEWS (2010)
TEM studies of plasma nitrided austenitic stainless steel
D. Stroz et al.
JOURNAL OF MICROSCOPY (2010)
Role of plasma nitriding temperature and time in the corrosion behaviour and microstructure evolution of 15-5 PH stainless steel
E. A. Bernardelli et al.
KOVOVE MATERIALY-METALLIC MATERIALS (2010)
Microstructure and Properties of Active Screen Plasma Nitrided Duplex Stainless Steel
L. H. Chiu et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
Lattice expansion of carbon-stabilized expanded austenite
Thomas S. Hummelshoj et al.
SCRIPTA MATERIALIA (2010)
Extended X-ray absorption fine structure investigation of nitrogen stabilized expanded austenite
Jette Oddershede et al.
SCRIPTA MATERIALIA (2010)
Corrosion behavior of martensitic and precipitation hardening stainless steels treated by plasma nitriding
Sonia P. Bruhl et al.
SURFACE & COATINGS TECHNOLOGY (2010)
On lattice plane rotation and crystallographic structure of the expanded austenite in plasma nitrided AISI 316L steel
C. Templier et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Low temperature glow-discharge nitriding of a low nickel austenitic stainless steel
F. Borgioli et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Formation of nitrided layers on duplex steel - influence of multiphase substrate
J. Bielawski et al.
SURFACE ENGINEERING (2010)
Sliding wear of plasma nitrided AISI 405 ferritic stainless steel
W. Tuckart et al.
SURFACE ENGINEERING (2010)
X-ray diffraction characterisation of expanded austenite and ferrite in plasma nitrided stainless steels
L. C. Gontijo et al.
SURFACE ENGINEERING (2010)
Low-temperature gaseous surface hardening of stainless steel: the current status
Thomas L. Christiansen et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2009)
Recent developments in stainless steels
K. H. Lo et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2009)
Enhanced Carbon Diffusion in Austenitic Stainless Steel Carburized at Low Temperature
F. Ernst et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Paraequilibrium Carburization of Duplex and Ferritic Stainless Steels
G. M. Michal et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Fundamental and Innovations in Plasma Assisted Diffusion of Nitrogen and Carbon in Austenitic Stainless Steels and Related Alloys
Thierry Czerwiec et al.
PLASMA PROCESSES AND POLYMERS (2009)
Formation and microstructural characterisation of S-phase layers in Ni-free austenitic stainless steels by low-temperature plasma surface alloying
Joseph Buhagiar et al.
SURFACE & COATINGS TECHNOLOGY (2009)
Improvement of erosion and erosion-corrosion resistance of AISI420 stainless steel by low temperature plasma nitriding
Yun-tao Xi et al.
APPLIED SURFACE SCIENCE (2008)
Electrochemical behaviour of an AISI 304L stainless steel implanted with nitrogen
C. M. Abreu et al.
ELECTROCHIMICA ACTA (2008)
Nitrogen diffusion and nitrogen depth profiles in expanded austenite: experimental assessment, numerical simulation and role of stress
T. Christiansen et al.
MATERIALS SCIENCE AND TECHNOLOGY (2008)
On the microstructure and phase identification of plasma nitrided 17-4PH precipitation hardening stainless steel
H. Dong et al.
SURFACE & COATINGS TECHNOLOGY (2008)
High-order diffractometry of expanded austenite using synchrotron radiation
M. P. Fewell et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels
J. Talonen et al.
ACTA MATERIALIA (2007)
Wear behaviour of low-temperature gas nitrided austenitic stainless steel in a corrosive liquid environment
J. Baranowska et al.
WEAR (2007)
Improving the surface properties of A286 precipitation-hardening stainless steel by low-temperature plasma nitriding
M. Esfandiari et al.
SURFACE & COATINGS TECHNOLOGY (2007)
Microstructure and Wear Behavior of DC-Pulsed Plasma Nitrided AISI 316L Austenitic Stainless Steel
Evangelina De Las Heras et al.
PLASMA PROCESSES AND POLYMERS (2007)
A comparative study of low temperature plasma nitriding, carburising and nitrocarburising of AISI 410 martensitic stainless steel
C. X. Li et al.
MATERIALS SCIENCE AND TECHNOLOGY (2007)
Corrosion resistance of the layers formed on the surface of plasma-nitrided AISI 304L steel
L. C. Gontijo et al.
THIN SOLID FILMS (2006)
Previous heat treatment inducing different plasma nitriding behaviors in martensitic stainless steels
C. A. Figueroa et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2006)
Corrosion properties of plasma nitrided AISI 410 martensitic stainless steel in 3.5% NaCl and 1% HCl aqueous solutions
C. X. Li et al.
CORROSION SCIENCE (2006)
Influence of annealing conditions on ion nitriding of martensitic stainless steel
D. Manova et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Corrosion resistance of nitrided layers on austenitic steel
J Baranowska et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Microstructure and properties of layers on chromium steel
J. Bielawski et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Corrosion resistance properties of glow-discharge nitrided AISI 316L austenitic stainless steel in NaCl solutions
A. Fossati et al.
CORROSION SCIENCE (2006)
Glow discharge nitriding of AISI 316L austenitic stainless steel: Influence of treatment pressure
F Borgioli et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Simultaneous surface engineering and bulk hardening of precipitation hardening stainless steel
RB Frandsen et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Carbon supersaturation due to paraequilibrium carburization: Stainless steels with greatly improved mechanical properties
GM Michal et al.
ACTA MATERIALIA (2006)
Plasma surface engineering of precipitation hardening stainless steels
M Esfandiari et al.
SURFACE ENGINEERING (2006)
Glow-discharge nitriding of AISI 316L austenitic stainless steel: influence of treatment time
A Fossati et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Controlled dissolution of colossal quantities of nitrogen in stainless steel
T Christiansen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Friction and rolling-sliding wear of DC-pulsed plasma nitrided AISI 410 martensitic stainless steel
P Corengia et al.
WEAR (2006)
Variable lattice expansion in martensitic stainless steel after nitrogen ion implantation
D Manova et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2006)
Glow-discharge nitriding of AISI 316L austenitic stainless steel: influence of treatment temperature
F Borgioli et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Low temperature gaseous nitriding and carburising of stainless steel
T Christiansen et al.
SURFACE ENGINEERING (2005)
Surface material design of 316 stainless steel by combination of low temperature carburizing and nitriding
M Tsujikawa et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Wear behaviour of martensitic stainless steel after PIII surface treatment
D Manova et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Hybrid plasma surface alloying of austenitic stainless steels with nitrogen and carbon
Y Sun
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Structural modifications and corrosion behavior of martensitic stainless steel nitrided by plasma immersion ion implantation
CA Figueroa et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2005)
Wear reduction in AISI 630 martensitic stainless steel after energetic nitrogen ion implantation
S Mändl et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Behavior of carbon in low temperature plasma nitriding layer of austenitic stainless steel
M Tsujikawa et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Low temperature plasma nitrocarburisig of AISI 316 austenitic stainless steel
Z Cheng et al.
SURFACE & COATINGS TECHNOLOGY (2005)
On the kinetics of plasma nitriding a martensitic stainless steel type AISI 420
CE Pinedo et al.
SURFACE & COATINGS TECHNOLOGY (2004)
Microstructure and corrosion behaviour of DC-pulsed plasma nitrided AISI 410 martensitic stainless steel
P Corengia et al.
SURFACE & COATINGS TECHNOLOGY (2004)
Comparison of expanded austenite and expanded martensite formed after nitrogen PIII
S Mändl et al.
SURFACE & COATINGS TECHNOLOGY (2004)
Formation of an MN-type cubic nitride phase in reactively sputtered stainless steel-nitrogen films
SR Kappaganthu et al.
JOURNAL OF CRYSTAL GROWTH (2004)
Corrosion properties of active screen plasma nitrided 316 austenitic stainless steel
CX Li et al.
CORROSION SCIENCE (2004)
Low temperature plasma nitriding characteristics of precipitation hardening stainless steel
Y Sun et al.
SURFACE ENGINEERING (2003)
Carbon and nitrogen in iron-based austenite and martensite: An attempt at comparative analysis
VG Gavriljuk
JOURNAL DE PHYSIQUE IV (2003)
Nitrogen diffusivity in expanded austenite
S Mändl et al.
SURFACE & COATINGS TECHNOLOGY (2003)
Colossal carbon supersaturation in austenitic stainless steels carburized at low temperature
Y Cao et al.
ACTA MATERIALIA (2003)
Thermal stability of PI3 nitrided surface layers on ferritic steels
G Schreiber et al.
SURFACE & COATINGS TECHNOLOGY (2003)
Characteristics of martensitic stainless steel nitrided in a low-pressure RF plasma
SK Kim et al.
SURFACE & COATINGS TECHNOLOGY (2003)
Comparison studies on properties of nitrogen and carbon S phase on low temperature plasma alloyed AISI 316 stainless steel
S Thaiwatthana et al.
SURFACE ENGINEERING (2002)
Structure and corrosion behaviour of stainless steels after plasma and gas nitriding
HJ Spies et al.
SURFACE ENGINEERING (2002)
Surface engineering of austenitic stainless steel
T Bell
SURFACE ENGINEERING (2002)
Thermal stability of carbon S phase in 316 stainless steel
XY Li et al.
SURFACE ENGINEERING (2002)
Environmentally friendly low temperature plasma processing of stainless steel components for nuclear industry
JP Lebrun et al.
SURFACE ENGINEERING (2002)
Chemical bonding of nitrogen in low energy high flux implanted austenitic stainless steel
JP Riviere et al.
JOURNAL OF APPLIED PHYSICS (2002)
Ion nitriding of stainless steels.: Real time surface characterization by synchrotron X-ray diffraction
J Feugeas et al.
SURFACE & COATINGS TECHNOLOGY (2002)
A study of martensitic stainless steel AISI 420 modified using plasma nitriding
I Alphonsa et al.
SURFACE & COATINGS TECHNOLOGY (2002)
Influence of the treatment atmosphere on the characteristics of glow-discharge treated sintered stainless steels
F Borgioli et al.
SURFACE & COATINGS TECHNOLOGY (2002)
Glow-discharge nitriding of sintered stainless steels
T Bacci et al.
SURFACE & COATINGS TECHNOLOGY (2001)
Nitrogen and carbon expanded austenite produced by PI3
C Blawert et al.
SURFACE & COATINGS TECHNOLOGY (2001)
Joint second prize - Low temperature plasma nitriding of 316 stainless steel - Nature of S phase end its thermal stability
XY Li
SURFACE ENGINEERING (2001)
Microstructure of the nitride layer of AISI 316 stainless steel produced by intensified plasma assisted processing
JC Jiang et al.
JOURNAL OF APPLIED PHYSICS (2000)
Influence of the material composition on the nitriding result of steels by plasma immersion ion implantation
C Blawert et al.
SURFACE & COATINGS TECHNOLOGY (2000)
Low-temperature plasma-assisted nitriding
T Czerwiec et al.
SURFACE & COATINGS TECHNOLOGY (2000)
Fitting corrosion resistance of high nitrogen f.c.c. phase in plasma source ion nitrided austenitic stainless steel
XM Zhu et al.
SURFACE & COATINGS TECHNOLOGY (2000)
Share Paper
